Embedded Motion Control 2017 Group 6

From Control Systems Technology Group
Jump to navigation Jump to search

EMC main page

Group members

Student ID number
Ties Hoenselaar 0857112
Hasan Ilisu 0852221
Laura de Jong 0743679
Lars Moormann 0861223
Bas Straatman 0777325
Jeroen van der Velden 0-----


Tutor: Wouter Houtman

Initial Design

Requirements

In order to achieve the goal, the following requirements have to be met:

  • The robot has to drive through any maze complying with specifications
  • It has to escape the maze within the time limit
  • Collisions with the walls must be avoided
  • Doors must be opened
  • Doors must be recognized in order to achieve the previous requirement
  • The software has to be robust for imperfections in the measurement data and disturbances
  • The robot must not be idle for a long period of time
  • The robot must not ring the bell too often
  • The robot must autonomously solve and navigate through the maze
  • The Software must be started with only one executable

Functions

Components

The following components will be used to reach the goal:

Sensors

  • Laser range �nder which uses a laser beam to determine the distance to an object
  • Wheel encoders (odometry) to estimate the position of the robot relative to a starting location

Actuators

  • Holonomic base with omni-wheels
  • Bell to open the door
  • Pan-tilt unit for head (which will not be used)

Computer

  • Intel I7
  • Ubuntu 14.04

Specifications

The goal and the requirements will be achieved with the following specifications:

Robot

  • The maximum transnational speed of the robot is 0.5 m/s
  • The maximum rotational speed equals 1.2 rad/s
  • The corridor challenge has to be solved in 5 minutes
  • The maze challenge has to be solved in 7 minutes
  • Both challenges have a maximum of two trials
  • The laser range finder (LRF) has a range of 270 degrees
  • The wheel encoders have a accuracy of ...
  • The robot must not be idle for more than 30 seconds

Maze

  • The corners will be approximately 90 degrees
  • The wall distance is 0.5-1.5 meter
  • There is only 1 door in the maze
  • The door starts opening in 2 seconds
  • The door opens if the robot is within 1.3 meter of the door
  • The door is open in 5 seconds
  • The number of rings must not be larger than the number of potential doors
  • The maze may contain loops
  • The maze can contain dead ends

Interfaces

Helpful Files

Wiki Cheatsheet

Planning

Planning