Viotar/Proof of concept: Difference between revisions

From Control Systems Technology Group
Jump to navigation Jump to search
No edit summary
 
(22 intermediate revisions by one other user not shown)
Line 30: Line 30:
<h1 style="font-size:180%; border:none; margin:0; padding:0">
<h1 style="font-size:180%; border:none; margin:0; padding:0">
'''Welcome'''
'''Welcome'''
</h1><br/>After al the designing was done the actual Viotar was assembled. All the part were ordered and put together. The results are viewed on this page. |}
</h1><br/>After al the designing was done the actual Viotar was assembled. All the part were ordered and put together. The results are viewed on this page. Clicking the images will result in a larger picture.
|}
<br/>
{| cellpadding="10"
|-valign="top"
| style="border:2px solid #00FF33; background-color:#CCFF99"|


== Motivation==
==The final assembly==
After the Viotar was completely designed in NX5 the actual ordering of the parts and the assembly was done. The design process is described on the Hardware design page, this page will show the final results after the assembly of the parts. Drawing every part and making the assembly in NX5 did take a lot of time and effort, but during the actual making of the Viotar this time and effort definitely helped us a lot. Because the assembly was already made in NX5 all the parts did fit perfectly when they arrived and making the Viotar in real life was quite easy.  The figures below show the design of the complete assembly as it was made in NX5 and photographs of the actual assembly. From these photographs it can easily be seen that they are exactly the same, no changes had to be made in order for the assembly to fit.


During the last century electronic instruments became immensely popular, the electronical guitar as an excellent example. Electronic bowing instrument on the other hand never really became popular. This leads to the questions, why didn’t the electronic bowing instrument become as popular as the electronical guitar? There are several reasons that can explain this phenomenon. The existing electronical bowing instruments are modeled the same way as the traditional acoustic bowing instrument. Therefore these instruments also have the same shortcomings and difficulties the traditional acoustic bowing instruments have. These shortcomings are:
{| align=center padding=0 cellspacing=0 style="background:#CCFF99" width="1215px"
*Very difficult to play (a wrong combination of bowing speed and bowing force results in a scratching sound).
|-
*The traditional acoustic bowing instrument have a very limited sound range.
| style="font-size:85%; border:1px solid #cccccc; padding:3px 3px 0px 3px" |
*It’s impossible to play chords, at most 2 strings at the same time.
[[File:Design06img06.jpg|800px]] [[File:Viotar_001.jpg|400px]]<br/>
*The traditional acoustic bowing instrument don’t have the good ergonomics guitars have.
Left: The complete assembly for the actuation of one string.<br/>Right: A top view of the Viotar completely assembled for actuating two string.<br/><br/>
These points motivated us to make an electronical bowing instrument that doesn’t have these shortcomings. This means that we want to make an instrument which can play chords. Or, to be more specific, an instrument on which more than 2 strings can be excited at the same time. Therefore it is not possible to use a bow anymore, because with a bow it’s only possible to excite 1 ore all strings. Because of this the ergonomics of the traditional acoustic bowing instrument can be changed into something more hand able.<br/> With the new instrument exciting the string with the right combination of bow force and bow speed is not longer the responsibility of the player. The Viotar has to make sure that the right combination of bow force and bow speed is used. These demands imply that some kind of mechanical bowing device has to be used to excite the strings. This device has to be able to bow all combinations of strings and do that with the right combination of bow force and bow speed. These demands also made us decide that a electronical guitar would be a good instrument for a prototype.
[[File:Design06img01.jpg|400px]] [[File:Viotar_002.jpg|400px]] [[File:Viotar_003.jpg|400px]]<br/>
Left: The Solenoids and belts as they were designed in NX5.<br/>Middle and Right: The actual assembly of the solenoids and bowing belts.<br/><br/>
[[File:Design06img02.jpg|400px]] [[File:Viotar_005.jpg|400px]] [[File:Viotar_006.jpg|400px]]<br/>
Left: The bottom side of the Viotar, as it whas designed in NX5.<br/>Middle and Right: The bottom side of the Viotar when it whas actually assembled.
|-
|}
<br/>
One thing that probably draws the attention is the fact that the photographs only show the assembly for actuating two strings. This was not the intention but the funds that were available did not allow us to make the actuation for all six strings. The fact that we managed to assemble the Viotar exactly as we made it in NX5 does prove that it is technically possible to make the assembly where all six strings are actuated, only more funds have to be raised in order to do so.
 
==Proof of concept==

Latest revision as of 10:00, 28 March 2011

Realisation and Proof of concept


William Schattevoet
David Duwaer
Eric Backx
Arjan de Visser


Subpages:


Main page

Working principle of the violin and predicting it’s behavior

Ways to exite the string

Hardware Design

Software Design (Quantifying the signal we want to see)

Realisation and Proof of concept

Patent Research

Background information: Interview with Hendrick Zick

Recommendations


Welcome


After al the designing was done the actual Viotar was assembled. All the part were ordered and put together. The results are viewed on this page. Clicking the images will result in a larger picture.


The final assembly

After the Viotar was completely designed in NX5 the actual ordering of the parts and the assembly was done. The design process is described on the Hardware design page, this page will show the final results after the assembly of the parts. Drawing every part and making the assembly in NX5 did take a lot of time and effort, but during the actual making of the Viotar this time and effort definitely helped us a lot. Because the assembly was already made in NX5 all the parts did fit perfectly when they arrived and making the Viotar in real life was quite easy. The figures below show the design of the complete assembly as it was made in NX5 and photographs of the actual assembly. From these photographs it can easily be seen that they are exactly the same, no changes had to be made in order for the assembly to fit.

Design06img06.jpg Viotar 001.jpg
Left: The complete assembly for the actuation of one string.
Right: A top view of the Viotar completely assembled for actuating two string.

Design06img01.jpg Viotar 002.jpg Viotar 003.jpg
Left: The Solenoids and belts as they were designed in NX5.
Middle and Right: The actual assembly of the solenoids and bowing belts.

Design06img02.jpg Viotar 005.jpg Viotar 006.jpg
Left: The bottom side of the Viotar, as it whas designed in NX5.
Middle and Right: The bottom side of the Viotar when it whas actually assembled.


One thing that probably draws the attention is the fact that the photographs only show the assembly for actuating two strings. This was not the intention but the funds that were available did not allow us to make the actuation for all six strings. The fact that we managed to assemble the Viotar exactly as we made it in NX5 does prove that it is technically possible to make the assembly where all six strings are actuated, only more funds have to be raised in order to do so.

Proof of concept