PRE2022 3 Group7

From Control Systems Technology Group
Jump to navigation Jump to search

A better understanding of our waters

Group members

Names Study ID Email
Max van Wijk Electrical Engineering 1736418 m.h.o.v.wijk@student.tue.nl
David van Warmerdam Electrical Engineering 1714171 d.s.v.warmerdam@student.tue.nl
Luka Tepavčević Electrical Engineering 1720996 l.tepavcevic@student.tue.nl
Bob Verbeek Biomedical Engineering 1752510 b.m.verbeek@student.tue.nl
Yu-Hsuan Lin Computer Science 1672363 y.lin1@student.tue.nl
Saskia ten Dam Psychology and Technology 1577328 s.e.t.dam@student.tue.nl

Initial design concepts and their respective links

Final design subject

Swarm of Intelligent buoys that are able to sense its surroundings and deliver data based on this

Users

The target group of our device would be people who live close to either oceans or rivers, or areas where it is known that floods are prone to occur. Although The Netherlands is excellent protected against the ocean, it is still below sea level, making it a dangerous area if floods were to occur.

Therefore, everyone listed above will benefit from having something installed that could reliably warn about incoming floods. However, even if you don’t live in one of the mentioned areas, you can still benefit. This is because floods can cause major damage to the economy of a country, making it generally harder for others, or other surrounding countries as well.

To summarise, the most important stakeholders include:

  • The general public: benefits from the increased protection
  • The government: Increased chance of economy stability
  • Investors: Due to implementation, they get higher returns (or something, I'm not an investor). They may also have some say in the development process.
  • Inventors/designers: Can sell patents for money, or design further. They also directly control how it operates.


State of the art

Water quality checks, focussed on sensors:

  1. Review of sensors to monitor water quality: https://erncip-project.jrc.ec.europa.eu/sites/default/files/Review_of_sensors_to_monitor_water_%20quality.pdf - Gives a list of water quality monitoring probes, and the paper gives details on the specification of the sensors and their price. Addtionally, it gives other insights to water monitorization. The basic monitorization across all sites includes water’s flow rate, turbidity, pH, temperature, conductivity and pressure. Depending on the need chlorine, fluoride, nitrate, particle count or total organic carbon are also monitored in some places. The list of sensors and the description of functionality:
    1. fluorescence-dissolved organic matter (FDOM) sensor, ->dissolved organic carbon (DOC), trihalomethane (THM),  methyl mercury (MeHg)
    2. The KaptaTM 3000 AC4 (3600 euro), free chlorine, pressure, temperature and conductivity
    3. Spectro::lyser™ (12 000 euro) TSS, turbidity, NO3-N, COD, BOD, TOC, DOC, UV254, colour, BTX, O3, H2S, AOC, fingerprints and spectral-alarms, temperature and pressure
    4. The i::scan (4000 euro) colour, UV254, organics (TOC, DOC, COD, BOD), turbidity and UV-V
    5. EventLab (14000 euro)
    6. Lab-on-Chip ()
    7. The Algae Toximeter (30000 euro)
    8. COLIGUARD® (50000 euro)
  2. The estimated price of the signle purpose sensors, with possibly worse specifications.
    • Flow rate: (+20 euro)
    • Turbidity sensor: (+- 25 euro)
    • pH: (+25 euro)
    • Temperature (+- 10 euro)
    • Conductivity (+ 120 euro)
    • Pressure (+30 euro)

Swarm of robots:

  1. A Review of Studies in Swarm Robotics: https://journals.tubitak.gov.tr/cgi/viewcontent.cgi?article=3571&context=elektrik

Detecting micro plastics, focussing on the chemistry part:

Generating energy:

  1. Tidal current power generation: https://link.springer.com/article/10.1007/s40722-016-0044-8 + https://www.sciencedirect.com/science/article/pii/030142159190049T - There are different types of tidal current generators: turbines (multiple types), kites and hydrofoils. Out of these 3, turbines are the easiest to understand, however, they either require too much space (axial-flow), or don’t generate enough reliable power (cross-flow). Furthermore, the materials could get damaged by prolonged contact with water, reducing the lifespan of anything operating in the water.
  2. Wave energy generation: https://www.sciencedirect.com/science/article/abs/pii/S1364032115003925?casa_token=CVv0TFwNB7EAAAAA:4Y-xywxZlAy8BZ6r8pWrPb8Awjj4AhK5sI4MiIz0dBDEToEbmcoQwQ-DvR6aurkkL3MSNqI67k4M + https://aip.scitation.org/doi/full/10.1063/1.4974496  - Either linear or radial generation. For us, linear would be the better option as it requires less space (but is, of course, less efficient). This generation would be done by means of moving multiple permanent magnets around, creating a moving magnetic field, inducing a flux through a coil, which in turn produces current. This method will, however, only work when waves are high enough, and may, therefore, not produce enough power for whatever we may want to install inside our aperatus.
  3. Solar power generation: https://www.sciencedirect.com/science/article/pii/S2214785318312665 - may be possible, however, it would mean that there is a large possibility that the device would not be active for large periods of time. Further, life spans of PV cells are not extremely long, and are easily damaged, making it not the best solution for ocean power generation.
  4. Triboelectric nanogenerators: https://www.sciencedirect.com/science/article/pii/S2211285519304628?casa_token=2Tpy27NOQPAAAAAA:ujdMrGEREH3dbh4gfeWgOvj3Wj5Br3X2cEBS-_Dg5jG00sTSDGgrxvZkc4G2e98LYs_pvBX90yVT + https://www.sciencedirect.com/science/article/pii/S2211285514002353?casa_token=Ow53wafsXIkAAAAA:D4sDZMP-x4ull8nveIxces-zSmaTDom9e4ERPpAaqBPiYtD4OT14B4j5SPJdqJKm6GjanENsUT2n - The generation of energy created by rubbing two objects against each other. The rubbing part will then occur due to the mechanical energy provided by the ocean waves.

Conclusion: In general, most of the solutions regarding waves or movements take into account the fact that the generation is able to take place on a fixed point. If we would use something that floats in water, this may become an issue. Therefore, although it is not the most optimal, PV energy generation (solar panels), seems to be the best solution.

Earthquake and flood detection:

Climate change / rise in water level:

Monitoring aquatic flora and fauna:

For the monitoring of aquatic flora and fauna, the target group would be very dependent on what needs to be monitored, therefore some potential ideas could be a general monitoring buoy or a buoy that specifically monitors some type of flora or fauna.


For the concept of more specific monitoring types of buoys, one article that was found was seen to be making a prototype of a buoy that is used to monitor a certain type of naturally occurring harmful algae: https://ieeexplore.ieee.org/abstract/document/9269340?casa_token=Zd6UuMqNOzUAAAAA:L0hEid16nuf2RkAiAwKQq3qmjLf20eA8NeGWoLWJqAi7g5BqLbC81ZHZl05Sas68oqBI8mVxDA. Therefore, a potential idea could be to look into what sort of naturally occurring aquatic flora or fauna that would be harmful or even deadly to humans and use buoys to monitor these sort of situations.

Buoys / other water thing, general & smart:

Smart Buoys

During the search of the state-of-the-art for smart buoys, many of the articles found consisted of potential prototypes for different varieties of buoys that were deemed to be 'smart buoys'. Smart buoys can be considered to fit in all the previous. This section will briefly discuss some potential implementations and key questions that would need to be asked when considering a 'smart buoy', that does not go into as specific topics as the previous headings.


First of all, from the following article https://ieeexplore.ieee.org/abstract/document/9389065?casa_token=v1iLJdDU9aQAAAAA:hti71IRV6XXgflmDxqO0QJ1bzK-giHRImvC4JeY6JnXn2hj0Z45GVwvBPukmVMOL1-gyF9qkvQ, multiple questions were seen to be important for the designing and making of smart buoys and even buoys in general. The most important question that can be deduced is in what sort of body of water will the buoy be deployed in. For example, Oceans and Seas are more unpredictable and destructive due to being large bodies of water, whereas a lake is usually much calmer, even in more extreme weather conditions. Following this, another question that was seen is in what sort of depth would the buoys be deployed in. This can directly impact some decisions that would be made, such as connections for swarm behaviour. For example in shallower, it might be a possibility connect the buoys using wires, but in deeper waters it might be better to connect them wirelessly. This would then also impact what would need to be put on the buoy so that it would function as intended, such as what hardware and software would need to be used, and how would it be powered, which is looked into in the Generating electricity section.


This following article showed a potential way a 'smart buoy' could be implemeted as a state-of-the-art idea: https://ieeexplore.ieee.org/abstract/document/4099173?casa_token=KUV7FHj5NFUAAAAA:_IQbjLXYaynpEfAHVrqD5MLHcfGcV4nyolt6auvFSZZQ7zUhhcor-JBIMuTrrfhW9gOqmG4sUA. The main concept of the prototype mentioned here is that a 'smart buoy' could be used in an auto aligning fashion and the reason that this might be important is because many buoys already existing are used to guide ships with some used to moore smaller ships away from shore. But since the seas and oceans can be quite unpredictable, harsh weather can sweep away buoys from their initial location which can affect how ships and boats would move around. The degree of how far it might be swept away would depend on the anchor being used. But if auto aligning buoys are used, then there might not be a need for heavily anchored buoys as the auto aligning buoy could move back to its original position using a GPS or something along those lines. But the biggest problem with this sort of idea is that it would once again bring about some major problems that would need to be sorted. For example how would it be connected to the GPS and how much power would it use

Weekly approach and general planning

Week Deliverables Milestones
1
  • Subject
  • State of the art
  • Planning
  • Decide on subject
2
  • A descriptive prototype with supportive research (MoSCoW)
  • Preliminary designs
  • Decide on final design requirements
3
  • Final design chosen from preliminary designs
  • BIll of materials/components
  • Decide on final design
  • Make a list of all materials and components needed
4
  • Start on prototype
  • Order components
5
  • Work on prototype
  • Testing
6
  • Start on presentation
  • Work on prototype
  • Testing
7
  • Final presentation
  • Prototype
  • Finish prototype
  • Finish presentation
  • Finals tests
8
  • Finished wiki
  • Finish the wiki
Retrieved from "https://dsdwiki.wtb.tue.nl/index.php?title=PRE2022_3_Group7&oldid=118513"