PRE2022 3 Group3: Difference between revisions

From Control Systems Technology Group
Jump to navigation Jump to search
No edit summary
Tag: 2017 source edit
 
(64 intermediate revisions by 7 users not shown)
Line 30: Line 30:
|Dhruv Manohar
|Dhruv Manohar
|1568868
|1568868
|
|BCS
|}
|}


==Introduction==
==Introduction==
<br />
<br />
===Problem statement===
===Problem statement===
Plastics have had a big impact on the medical industry. Their main advantage is the ease of sterilization compared to traditional materials used in healthcare such as ceramics, glass and metal. The latter materials needed time-consuming sterilization processes, steaming or autoclaving, whereas for plastics, there is a new technology used: gamma sterilization. With the use of plastics, procedures are easier and safer and the costs have been reduced a lot<ref>Why Are Plastics Essential in the Medical Industry - Raya Plastics (rayda.co.uk)</ref>. But this revolutionary change of plastics in health care also results in a lot of plastic waste. In 2020, globally over 32 billion pounds of healthcare plastics were produced, and this is expected to grow to 48 billion pounds by 2025. Most of this plastic is being disposed of in landfills or by incineration even though much of this material is uncontaminated and recyclable<ref>Why HPRC - Healthcare Plastics Recycling Council</ref>. During the Corona crisis, the waste became even more because the large amount of single-use plastics that were needed as personal protective equipment. "There has been a dramatic demand for personal protective equipment (PPE). PPE which includes masks, safety goggles, face shields, hair covers etc. are all made of plastics like polyethylene terephthalate (PET)" <ref>https://www.sciencedirect.com/science/article/pii/S2542504821000348</ref>.  All these plastics have a great impact on the environment, especially because most of these plastics are not recycled. Recycling these plastics is a solution to solve the crisis of plastic pollution, but recycling medical plastic has difficulties involved in sorting and cleaning.
Plastics have had a big impact on the medical industry. Their main advantage is the ease of sterilization compared to traditional materials used in healthcare such as ceramics, glass and metal. The latter materials needed time-consuming sterilization processes, steaming or autoclaving, whereas for plastics, there is a new technology used: gamma sterilization. With the use of plastics, procedures are easier and safer and the costs have been reduced a lot<ref name=":0">Plastics, R. (2018, April 30). ''Why Are Plastics Essential in the Medical Industry - Raya Plastics''. Rayda Plastics. <nowiki>https://www.rayda.co.uk/blog/plastics-in-medicine/</nowiki></ref>. But this revolutionary change of plastics in health care also results in a lot of plastic waste. In 2020, globally over 32 billion pounds of healthcare plastics were produced, and this is expected to grow to 48 billion pounds by 2025. Most of this plastic is being disposed of in landfills or by incineration even though much of this material is uncontaminated and recyclable<ref>[https://www.hprc.org/about-us/ Plastics, R. (2018b, April 30). ''Why Are Plastics Essential in the Medical Industry - Raya Plastics''. Rayda Plastics. https://www.rayda.co.uk/blog/plastics-in-medicine/]</ref>. During the Corona crisis, the waste became even more because the large amount of single-use plastics that were needed as personal protective equipment. "There has been a dramatic demand for personal protective equipment (PPE). PPE which includes masks, safety goggles, face shields, hair covers etc. are all made of plastics like polyethylene terephthalate (PET)" <ref name=":5">[https://www.sciencedirect.com/science/article/pii/S2542504821000348 Joseph, B., James, J., Kalarikkal, N., & Thomas, S. (2021e). Recycling of medical plastics. ''Advanced Industrial and Engineering Polymer Research'', ''4''(3), 199–208. https://doi.org/10.1016/j.aiepr.2021.06.003]</ref>.  All these plastics have a great impact on the environment, especially because most of these plastics are assumed to be infectious and cannot be discarded with the common municipal waste. Moreover, lack of sufficient landfills available have persuaded mankind to think of sustainable recyclable options. Most of the medical plastics have the potential to be recycled back into the petrochemical industry as a feedstock for the production of new plastics or refined fuels<ref name=":0" />. Recycling these plastics is a solution to solve the crisis of plastic pollution, but recycling medical plastic has difficulties involved in sorting and cleaning.
 
To use plastics for biomedical application, it is important that plastics are selected with appropriate material, chemical or thermal properties, sterilization potential and durability because not all plastics can be recycled. If the plastics are not recycled in the correct way they can cause serious health issues and long-term pollution<ref>Recycling of medical plastics - ScienceDirect</ref>. Even though recycling medical plastic can make a serious difference, still very little is known and done. There is an association, HPRC (Healthcare Plastics Recycling Council), that tries to solve this problem. However, still not a lot has improved.  


<br />
To use plastics for biomedical application, it is important that plastics are selected with appropriate material, chemical or thermal properties, sterilization potential and durability because not all plastics can be recycled. If the plastics are not recycled in the correct way they can cause serious health issues and long-term pollution<ref name=":5" />. Even though recycling medical plastic can make a serious difference, still very little is known and done. There is an association, HPRC (Healthcare Plastics Recycling Council), that tries to solve this problem. However, still not a lot has improved.


===Objectives===
<br />In the US, the economy lost more than US$7.2 billion from landfilled plastic waste in 2021 according to Department of Energy (DOE) estimates. "We posit that a substantial amount of landfilled plastic waste could be recovered through advanced sorting, existing, and emerging recycling processes", asserts Anelia Milbrandt, a senior research analyst at the DOE’s National Renewable Energy Laboratory.<ref>[https://www.packaginginsights.com/news/how-much-us-losing-billions-every-year-to-landfilled-plastic-waste-finds-department-of-energy.html CNS MEDIA. (2022, May 5). ''How much? US losing billions every year to landfilled plastic waste, finds Department of Energy''. .packaginginsights.com/. https://www.packaginginsights.com/news/how-much-us-losing-billions-every-year-to-landfilled-plastic-waste-finds-department-of-energy.html]</ref>
====Objectives====
To help the recycling process of medical plastic, we will try to come up with a robot which makes helps with dividing the different plastics based on their properties so it will be easier to recycle them. In order to do this literary research will be done and a concept will be made.<br />
To help the recycling process of medical plastic, we will try to come up with a robot which makes helps with dividing the different plastics based on their properties so it will be easier to recycle them. In order to do this literary research will be done and a concept will be made.<br />


===Why?===
====Why?====
Medical staff already have a heavy workload and many responsibilities to deal with during their time at hospitals and clinics. Except from the shortage of medical staff due to the growing population in European countries, the available medical staff already spend much time on other tasks than taking care of patients. For instance, a study published in SAGE journals reports that doctors for instance spend 8.7 hours per week (16.6 % of working hours) on administration less than physicians who spend 20.3 % of working hours on administrative tasks<ref>https://journals.sagepub.com/doi/10.2190/HS.44.4.a?url_ver=Z39.88-2003&rfr_id=ori:rid:crossref.org&rfr_dat=cr_pub%20%200pubmed</ref>. Training medical staff to separate medical waste based on their chemical properties could be a cheaper and easier solution , however it would also put more workload on them and affect the service quality they provide for their patients.   
Medical staff already have a heavy workload and many responsibilities to deal with during their time at hospitals and clinics. Except from the shortage of medical staff due to the growing population in European countries, the available medical staff already spend much time on other tasks than taking care of patients. For instance, a study published in SAGE journals reports that doctors for instance spend 8.7 hours per week (16.6 % of working hours) on administration less than physicians who spend 20.3 % of working hours on administrative tasks<ref>[https://journals.sagepub.com/doi/10.2190/HS.44.4.a?url_ver=Z39.88-2003&rfr_id=ori:rid:crossref.org&rfr_dat=cr_pub%20%200pubmed Woolhandler, S., & Himmelstein, D. U. (2014). Administrative Work Consumes One-Sixth of U.S. Physicians’ Working Hours and Lowers their Career Satisfaction. ''International Journal of Health Services'', ''44''(4), 635–642. https://doi.org/10.2190/hs.44.4.a]</ref>. Training medical staff to separate medical waste based on their chemical properties could be a cheaper and easier solution , however it would also put more workload on them and affect the service quality they provide for their patients.   


In addition , Stericycle’s Healthcare Workplace Safety Trend Report found that more than 90% of healthcare professionals surveyed believe effective medical waste management is key to providing the best patient care possible. On the other hand, those surveyed also reported that improper medical waste management contributes to fatigue and burnout (68%) and can negatively impact patient health and safety (72%). Nurses can save time and energy when they can dispose of medical waste through a streamlined process."<ref>https://www.stericycle.com/en-us/resource-center/blog/making-nurses-days-easier-with-more-efficient-waste-management</ref>
In addition , Stericycle’s Healthcare Workplace Safety Trend Report found that more than 90% of healthcare professionals surveyed believe effective medical waste management is key to providing the best patient care possible. On the other hand, those surveyed also reported that improper medical waste management contributes to fatigue and burnout (68%) and can negatively impact patient health and safety (72%). Nurses can save time and energy when they can dispose of medical waste through a streamlined process."<ref>[https://www.stericycle.com/en-us/resource-center/blog/making-nurses-days-easier-with-more-efficient-waste-management S. (2022, May 4). ''Efficient Waste Management Can Help Improve Nurse Well-Being''. Stericycle. https://www.stericycle.com/en-us/resource-center/blog/making-nurses-days-easier-with-more-efficient-waste-management]</ref>


<br />
<br />


==State of the art==
===State of the art===


In this section we will investigate potential attempts that have already been implemented in order to tackle different aspects of this problem and existent technologies that can help towards creating a final design.
In this section we will investigate potential attempts that have already been implemented in order to tackle different aspects of this problem and existent technologies that can help towards creating a final design.




'''Machines developed that can separate 12 different types of plastic'''<ref>https://www.innovationnewsnetwork.com/machines-developed-separate-12-different-types-plastic/16788/</ref>
'''Machines developed that can separate 12 different types of plastic'''<ref>[https://www.innovationnewsnetwork.com/machines-developed-separate-12-different-types-plastic/16788/ Rushton, K. (2022, February 28). ''Machines developed that can separate 12 different types of plastic''. Innovation News Network. https://www.innovationnewsnetwork.com/machines-developed-separate-12-different-types-plastic/16788/]</ref>


Researchers from the Department of Biological and Chemical Engineering at Aarhus University have created a new camera technology that can differentiate among 12 types of plastic From these types, PVC, PP, PS, PE, PC, PET, PA12, ABS are frequently used in the healthcare system. For example, Polycarbonate (PC) is usually found in syringes, tubes and stents. The camera technology separates the different types of plastic based on their pure chemical composition. It uses a hyperspectral camera and machine learning algorithms to analyze the type of plastic directly on the conveyor belt.
Researchers from the Department of Biological and Chemical Engineering at Aarhus University have created a new camera technology that can differentiate among 12 types of plastic From these types, PVC, PP, PS, PE, PC, PET, PA12, ABS are frequently used in the healthcare system. For example, Polycarbonate (PC) is usually found in syringes, tubes and stents. The camera technology separates the different types of plastic based on their pure chemical composition. It uses a hyperspectral camera and machine learning algorithms to analyze the type of plastic directly on the conveyor belt.
Line 64: Line 62:
In comparison, the current technology that usually uses near-infrared technology or density tests, can separate a much smaller variety of plastics and it is not as efficient.
In comparison, the current technology that usually uses near-infrared technology or density tests, can separate a much smaller variety of plastics and it is not as efficient.


'''Plastic classification via in-line hyperspectral camera analysis and unsupervised machine learning'''<ref>https://www.sciencedirect.com/science/article/pii/S0924203121001247?via%3Dihub</ref>
'''Plastic classification via in-line hyperspectral camera analysis and unsupervised machine learning'''<ref name=":4" />


Hyperspectral imaging with wavelengths from 955 to 1700 nm on thirteen different plastics analyzed by PCA has shown that the spectral range is sufficient to differentiate plastics. Unsupervised machine learning has proven to cluster the plastic types and the resulting loading matrix correctly classified unknown plastic samples.
Hyperspectral imaging with wavelengths from 955 to 1700 nm on thirteen different plastics analyzed by PCA has shown that the spectral range is sufficient to differentiate plastics. Unsupervised machine learning has proven to cluster the plastic types and the resulting loading matrix correctly classified unknown plastic samples.


'''Healthcare Plastics Recycling Council (HPRC)'''<ref>https://www.hprc.org/hospital-recycling-case-studies/</ref>
'''Healthcare Plastics Recycling Council (HPRC)'''<ref>[https://www.hprc.org/hospital-recycling-case-studies/ ''Hospital Recycling Case Studies | HPRC''. (2022, May 5). Healthcare Plastics Recycling Council. https://www.hprc.org/hospital-recycling-case-studies/]</ref>


The council showcases multiple case studies run in hospitals regarding plastic recycling. Even though multiple hospitals are planning and developing a recycling program, none of them had promising enough results to make a breakthrough.
The council showcases multiple case studies run in hospitals regarding plastic recycling. Even though multiple hospitals are planning and developing a recycling program, none of them had promising enough results to make a breakthrough.
Line 76: Line 74:
*Mayo Clinic: Mayo Clinic’s Healthcare Plastics Recycling Program began in 2013 and from 2016-2017 it saw a 78% increase in recycling the PP, PS and other types of plastic and a 9% increase in recycling PET AND HDPE plastics. The project involves the addition of a baler, a grinder and willing external plastic buyers.
*Mayo Clinic: Mayo Clinic’s Healthcare Plastics Recycling Program began in 2013 and from 2016-2017 it saw a 78% increase in recycling the PP, PS and other types of plastic and a 9% increase in recycling PET AND HDPE plastics. The project involves the addition of a baler, a grinder and willing external plastic buyers.


'''TRASHBOT'''<ref>https://cleanrobotics.com/trashbot/</ref>
'''TRASHBOT'''<ref>[https://cleanrobotics.com/trashbot/ ''TrashBot: The smart recycling bin that sorts at the point of disposal''. (2023, February 28). CleanRobotics. https://cleanrobotics.com/trashbot/]</ref>


Physical implementation of a autonomous sorting waste technology. Developed by '''clean'''robotics, the technology uses AI and computer vision to detect the recyclables and then applies machine learning algorithms to sort them and divert them into specific bins.  
Physical implementation of a autonomous sorting waste technology. Developed by '''clean'''robotics, the technology uses AI and computer vision to detect the recyclables and then applies machine learning algorithms to sort them and divert them into specific bins.  


'''ECOSTERYL'''<ref>https://www.ecosteryl.com/</ref>
'''ECOSTERYL'''<ref>[https://www.ecosteryl.com/ ''ECOSTERYL : Traitement et recyclage des déchets médicaux''. (2021, May 26). Ecosteryl. https://www.ecosteryl.com/]</ref>


Ecosteryl is a machine produced by the company AMB based in Belgium that offers a solution for medical waste treatment and recycling. The waste is shredded and decontaminated in a secured machine. The machine does not need any water or steam.
Ecosteryl is a machine produced by the company AMB based in Belgium that offers a solution for medical waste treatment and recycling. The waste is shredded and decontaminated in a secured machine. The machine does not need any water or steam.


'''ECODAS'''<ref>https://www.ecodas.com/en/ecodas-t100-en/</ref>
'''ECODAS'''<ref>[https://www.ecodas.com/en/ecodas-t100-en/ ECODAS. (2022, September 6). ''ECODAS T100 - DASRI, treatment of infectious , hospital and medical waste''. DASRI, Treatment of Infectious , Hospital and Medical Waste. https://www.ecodas.com/en/ecodas-t100-en/]</ref>


ECODAS is a company based in France that also deals with medical waste. This includes medical waste from hospitals, clinics, other healthcare institutions, seaports and airports. The ECODAS machine is an automated system that sterilizes regulated medical waste and thereby reducing around 80% of the waste volume. The recycling and sterilization include shredding and steaming of waste.   
ECODAS is a company based in France that also deals with medical waste. This includes medical waste from hospitals, clinics, other healthcare institutions, seaports and airports. The ECODAS machine is an automated system that sterilizes regulated medical waste and thereby reducing around 80% of the waste volume. The recycling and sterilization include shredding and steaming of waste.   


==Users==
==Users==
'''Primary Users: Medical Staff'''


===Primary Users: Medical Staff===
In the USA, the current workflow of medical staff regarding plastic waste management varies depending on the facility and region. However, there are generally accepted guidelines and best practices that medical staff follow to manage plastic waste.
In the USA, the current workflow of medical staff regarding plastic waste management varies depending on the facility and region. However, there are generally accepted guidelines and best practices that medical staff follow to manage plastic waste.


Firstly, medical staff are trained to segregate waste at the point of generation, which means that they sort the waste into different categories such as infectious, hazardous, pharmaceutical, or general waste. This helps to ensure that each type of waste is managed appropriately and safely. Once segregated, the plastic waste is typically collected in specialized containers that are labeled and color-coded to indicate the type of waste they contain. For example, infectious waste may be collected in red containers, while hazardous waste may be collected in yellow containers. Medical staff are also encouraged to minimize the amount of plastic waste they generate by using reusable or sustainable alternatives whenever possible. This includes using cloth gowns and towels instead of disposable ones, using reusable containers for sharps disposal, and minimizing the use of single-use plastics in the medical setting. Overall, the workflow of medical staff regarding plastic waste management in the USA involves careful segregation, labeling, and disposal of plastic waste, as well as a focus on minimizing the amount of waste generated.
Firstly, medical staff are trained to segregate waste at the point of generation, which means that they sort the waste into different categories such as infectious, hazardous, pharmaceutical, or general waste. This helps to ensure that each type of waste is managed appropriately and safely. Once segregated, the plastic waste is typically collected in specialized containers that are labeled and color-coded to indicate the type of waste they contain. For example, infectious waste may be collected in red containers, while hazardous waste may be collected in yellow containers. Medical staff are also encouraged to minimize the amount of plastic waste they generate by using reusable or sustainable alternatives whenever possible. This includes using cloth gowns and towels instead of disposable ones, using reusable containers for sharps disposal, and minimizing the use of single-use plastics in the medical setting. Overall, the workflow of medical staff regarding plastic waste management in the USA involves careful segregation, labeling, and disposal of plastic waste, as well as a focus on minimizing the amount of waste generated.


There are many problems that faces the nurses which makes medical waste management inefficient. In a study published in the "Journal of nursing management" , nurses were interviewed and the following problems are expressed: Firstly, medical and nursing students that temporarily work in a hospital lack the knowledge about recycling management process. Secondly, emergency cases which require immediate intervention leads to mistakes in throwing the waste in the correct disposal unit. Thirdly, lack of personnel leads to a heavy workload which again causes inevitable human mistakes. The biggest obstacle facing recycling was a lack of information about recyclable and contamination of materials.<ref>[https://onlinelibrary.wiley.com/doi/10.1111/jonm.13891 Sürme, Y., & Maraş, G. (2022). Recycling, responsible consumption and nursing: A qualitative study of surgical nurses’ recycling and medical waste management. ''Journal of Nursing Management'', ''30''(8), 4514–4522. https://doi.org/10.1111/jonm.13891]</ref>


'''Secondary Users: Hospital Management'''
For this group of users , it is essential that the segregation of medical plastic waste is done appropriately and automatically.  Segregation robots can help medical staff quickly and efficiently sort medical waste, saving time and increasing productivity. Furthermore ,  Medical waste must be properly segregated and disposed of according to local and national regulations. Segregation robots can help ensure that medical staff comply with these regulations, reducing the risk of fines and other penalties.


===Secondary Users: Hospital Management===
Now in hospitals, waste is generally separated into color-coded bins or bags. This system however is far from flawless. Because the color selected for each waste type varies between different regions. This lack of standardizations results in errors in the waste separation and makes the system inefficient.  
Now in hospitals, waste is generally separated into color-coded bins or bags. This system however is far from flawless. Because the color selected for each waste type varies between different regions. This lack of standardizations results in errors in the waste separation and makes the system inefficient.  


In hospitals the separation of infectious and non-infectious waste is an important process because faults during this process can result in higher costs and danger for the people working with the waste. Studies conclude that 70 to 80 percent of the infectious waste stream leaving hospitals include non-infectious wastes that have been mixed into the infectious waste stream due to poor separation practices. When non-infectious waste ends up being mixed with the infectious waste the costs will be significantly higher because it all has to be processed as infectious waste which is a more expensive process<ref>Medical waste management – A review - ScienceDirect</ref>. The poor separation system can also become dangerous when a person comes in contact with infectious waste.  
In hospitals the separation of infectious and non-infectious waste is an important process because faults during this process can result in higher costs and danger for the people working with the waste. Studies conclude that 70 to 80 percent of the infectious waste stream leaving hospitals include non-infectious wastes that have been mixed into the infectious waste stream due to poor separation practices. When non-infectious waste ends up being mixed with the infectious waste the costs will be significantly higher because it all has to be processed as infectious waste which is a more expensive process<ref>[https://www.sciencedirect.com/science/article/pii/S0301479715302176 Windfeld, E. S., & Brooks, M. S. (2015). Medical waste management – A review. ''Journal of Environmental Management'', ''163'', 98–108. https://doi.org/10.1016/j.jenvman.2015.08.013]</ref>. The poor separation system can also become dangerous when a person comes in contact with infectious waste.  


To prevent a mix up of the non-infectious and infectious waste it will be best to separate the two directly when it is deposited into the bins. This however comes with another problem, a lack of clear sorting protocols which makes it hard for the staff to correctly separate the waste.  
To prevent a mix up of the non-infectious and infectious waste it will be best to separate the two directly when it is deposited into the bins. This however comes with another problem, a lack of clear sorting protocols which makes it hard for the staff to correctly separate the waste.  


When sorting plastics there are some additional points to take into consideration in the separation process. There should be a separation between the plastics that can be recycled and the ones that cannot to recycle as much of the plastic as possible. This should be done very carefully because when the waste is not handled correctly it can lead to serious environmental problem. The plastics which can be recycled should again be sorted into their ease of recyclability. When the plastics are infectious, they first have to be sterilized before they can be send with the other waste<ref>Recycling of medical plastics - ScienceDirect</ref>.
When sorting plastics there are some additional points to take into consideration in the separation process. There should be a separation between the plastics that can be recycled and the ones that cannot to recycle as much of the plastic as possible. This should be done very carefully because when the waste is not handled correctly it can lead to serious environmental problem. The plastics which can be recycled should again be sorted into their ease of recyclability. When the plastics are infectious, they first have to be sterilized before they can be send with the other waste<ref name=":5" />.


So overall for the good waste separation system in hospitals it is best if the waste is separated at the source and for the plastics it is important that is correctly separated based on the recyclability of the plastic to recycle as much of the plastic as possible.  
So overall for the good waste separation system in hospitals it is best if the waste is separated at the source and for the plastics it is important that is correctly separated based on the recyclability of the plastic to recycle as much of the plastic as possible.  


 
===Tertiary Users: Waste Handlers===
'''Tertiary Users: Waste Handlers'''
 
In the process of plastic-recycling, waste handlers are working on reprocessing plastic scraps and waste into useful products. This often requires greater processing than the recycling of other materials, due to the unique properties of plastics and the various steps that need to be considered. Due to the high molecular weight of large polymer chains, dissolving plastics cannot easily be achieved through heating. Therefore the mixing of different plastics tends to produce phase-separated material, which is structurally weak and only useful in a very limited range of applications. In addition the widespread use of dyes, fillers and other additives leads to many more impurities that have to be accounted for. Oftentimes the polymers are damaged in the process of removing these impurities. Whenever it is possible to produce a single-material and clean stream of plastic, the plastic recyclables are usually shredded and worked into pellets, which are then used to produce new products. Oftentimes products which are themselves made from recycled plastic are no longer recyclable, due to the structural toll the recycling process takes on the material.<ref>https://www.pulpandpaper-technology.com/articles/plasticwaste</ref>
In the process of plastic-recycling, waste handlers are working on reprocessing plastic scraps and waste into useful products. This often requires greater processing than the recycling of other materials, due to the unique properties of plastics and the various steps that need to be considered. Due to the high molecular weight of large polymer chains, dissolving plastics cannot easily be achieved through heating. Therefore the mixing of different plastics tends to produce phase-separated material, which is structurally weak and only useful in a very limited range of applications. In addition the widespread use of dyes, fillers and other additives leads to many more impurities that have to be accounted for. Oftentimes the polymers are damaged in the process of removing these impurities. Whenever it is possible to produce a single-material and clean stream of plastic, the plastic recyclables are usually shredded and worked into pellets, which are then used to produce new products. Oftentimes products which are themselves made from recycled plastic are no longer recyclable, due to the structural toll the recycling process takes on the material.<ref>https://www.pulpandpaper-technology.com/articles/plasticwaste</ref>
[[File:Screenshot from 2023-03-10 12-45-40.png|thumb|502x502px|https://www.statista.com/statistics/1228851/us-plastic-waste-recycled-by-resin/]]
[[File:Screenshot from 2023-03-10 12-45-40.png|thumb|502x502px|https://www.statista.com/statistics/1228851/us-plastic-waste-recycled-by-resin/]]
The difficulty of the plastic-recycling process is reflected in the amount of plastics recycled. According to a survey in the U.S. in 2021 an estimated 40.1 to 51 million tons of plastic waste were generated, of which only between five and six percent of total plastic were recycled. The majority of U.S. plastic waste is land filled.<ref>https://www.statista.com/statistics/1339439/plastic-waste-management-by-method-us/</ref>
The difficulty of the plastic-recycling process is reflected in the amount of plastics recycled. According to a survey in the U.S. in 2021 an estimated 40.1 to 51 million tons of plastic waste were generated, of which only between five and six percent of total plastic were recycled. The majority of U.S. plastic waste is land filled.<ref>[https://www.statista.com/statistics/1339439/plastic-waste-management-by-method-us/ Statista. (2023, February 6). ''Plastic waste managed in the U.S. 2018-2021, by method and scenario''. https://www.statista.com/statistics/1339439/plastic-waste-management-by-method-us/]</ref>


The demand for recycled plastics and therefore the market volatility for waste handlers is affected by the price of virgin commodity plastics. Specifically the mixed material healthcare plastic waste streams in addition to the low mass per unit area of plastics relative to other materials, leads to a high logistic cost associated with the recycling process. The European Recycling Industries Confederation (EuRIC) wrote a position paper on the capital investment required to use heavy chemical recycling plants that process mixed waste streams (i.e. through processes such as pyrolysis). It concluded that this would be economically viable at a crude oil price of $65-75/barrel. Over the last five years, oil prices have not been above this range. On the other hand the vast amount of recyclable plastics that are currently ending up in landfill in addition to the momentum behind advanced recycling technologies could work to minimize the cost of the recycling process and ensure market volatility.
The demand for recycled plastics and therefore the market volatility for waste handlers is affected by the price of virgin commodity plastics. Specifically the mixed material healthcare plastic waste streams in addition to the low mass per unit area of plastics relative to other materials, leads to a high logistic cost associated with the recycling process. The European Recycling Industries Confederation (EuRIC) wrote a position paper on the capital investment required to use heavy chemical recycling plants that process mixed waste streams (i.e. through processes such as pyrolysis). It concluded that this would be economically viable at a crude oil price of $65-75/barrel. Over the last five years, oil prices have not been above this range. On the other hand the vast amount of recyclable plastics that are currently ending up in landfill in addition to the momentum behind advanced recycling technologies could work to minimize the cost of the recycling process and ensure market volatility.
Line 119: Line 117:
While the recycling of plastics has to of course be economically viable, it should also be environmentally viable. The Dutch firm CE Delft analyzed the greenhouse gas reduction and concluded that purification and depolymerization technologies were comparable to mechanical recycling whereas thermal conversion technologies (e.g. pyrolysis), while generating greater greenhouse gas emissions than mechanical recycling, still fell below what would be expected from incineration.<ref name=":1">https://www.hprc.org/wp-content/uploads/2022/05/Advanced-Recycling-White-Paper-Phase-1.pdf</ref>
While the recycling of plastics has to of course be economically viable, it should also be environmentally viable. The Dutch firm CE Delft analyzed the greenhouse gas reduction and concluded that purification and depolymerization technologies were comparable to mechanical recycling whereas thermal conversion technologies (e.g. pyrolysis), while generating greater greenhouse gas emissions than mechanical recycling, still fell below what would be expected from incineration.<ref name=":1">https://www.hprc.org/wp-content/uploads/2022/05/Advanced-Recycling-White-Paper-Phase-1.pdf</ref>


Especially medical waste bears the additional risk of being infectious. Using various sterilization processes we could get rid of that risk, but add to the logistic and economical barriers for waste handlers.<ref>https://www.sciencedirect.com/science/article/pii/S2542504821000348</ref>
Especially medical waste bears the additional risk of being infectious. Using various sterilization processes we could get rid of that risk, but add to the logistic and economical barriers for waste handlers.<ref name=":5" />
<br />
<br />
[[File:Diagram on different recycling methods.png|thumb|504x504px|https://www.sciencedirect.com/science/article/pii/S2542504821000348]]
[[File:Diagram on different recycling methods.png|thumb|504x504px|https://www.sciencedirect.com/science/article/pii/S2542504821000348]]
There are essentially four common plastic recycling routes:
There are essentially four common plastic recycling routes (as can be seen in the figure to the right):


#Primary recycling is the process of reusing single type plastics which are clean or uncontaminated or converting plastic scraps into products with similar characteristics of the original material. Oftentimes waste plastics can be mixed with virgin material to ensure the required product quality. This is considered a closed loop process, as can be seen in the figure.
#Primary recycling is the process of reusing single type plastics which are clean or uncontaminated or converting plastic scraps into products with similar characteristics of the original material. Oftentimes waste plastics can be mixed with virgin material to ensure the required product quality. This is considered a closed loop process, as can be seen in the figure.
#Secondary recycling is the recovery of plastic wastes by mechanical means. It involves washing the plastic to remove contaminants and grinding the material. Repeatedly processing plastic in this way leads to slowly building contamination and thermal degradation over time.
#Secondary recycling is the recovery of plastic wastes by mechanical means. It involves washing the plastic to remove contaminants and grinding the material. Repeatedly processing plastic in this way leads to slowly building contamination and thermal degradation over time.
#Tertiary recycling is the (often chemical) process of converting the material into smaller molecules (liquids or gasses) to generate chemicals and fuels. It involves chemical processes such as purification, wherein polymers are chemically separated from unwanted additives, decomposition/depolymerization, which breaks the molecular bonds of plastics into monomers and intermediates by biological, chemical, or thermal means, and thermal conversion, which brings plastics back to their most basic petrochemical building blocks by breaking their molecular bonds. The most popular methods of thermal conversion is pyrolysis, where medium temperatures are applied in the absence of oxygen or air to convert plastic waste into liquid and gaseous products and a char byproduct. This process is very useful since it allows for the recycling of material blends.
#Tertiary recycling is the (often chemical) process of converting the material into smaller molecules (liquids or gasses) to generate chemicals and fuels. It involves chemical processes such as purification, wherein polymers are chemically separated from unwanted additives, decomposition/depolymerization, which breaks the molecular bonds of plastics into monomers and intermediates by biological, chemical, or thermal means, and thermal conversion, which brings plastics back to their most basic petrochemical building blocks by breaking their molecular bonds. The most popular methods of thermal conversion is pyrolysis, where medium temperatures are applied in the absence of oxygen or air to convert plastic waste into liquid and gaseous products and a char byproduct. This process is very useful since it allows for the recycling of material blends.
#Quaternary recycling is the process of recovering energy from waste plastic by incineration. This method is applied whenever wastes are highly contaminated and cannot be recycled by normal means. The process results in waste residues and ultimately pollution as well as harmful gasses that are released during combustion. It reduces the volume of waste to 1% and effectively decomposes toxic or contagious waste.<ref>https://www.sciencedirect.com/science/article/pii/S2542504821000348</ref>
#Quaternary recycling is the process of recovering energy from waste plastic by incineration. This method is applied whenever wastes are highly contaminated and cannot be recycled by normal means. The process results in waste residues and ultimately pollution as well as harmful gasses that are released during combustion. It reduces the volume of waste to 1% and effectively decomposes toxic or contagious waste.<ref name=":5" />


<br />
<br />
==Design concept==
==Design concept==
To help with the process of recycling plastics in hospitals, we will design a bin robot. The purpose of this robot is to separate the most common types of plastics in hospitals by itself, so that the medical staff do not have to have extra training and knowledge to separate the plastics correctly.


===MoSCoW List===
===MoSCoW List===
In order to define our design requirements, we created a list which prioritizes these using the MoSCoW method.
In order to define our design requirements, we created a list which prioritizes these using the MoSCoW method.
- this is a draft -
{| class="wikitable"
{| class="wikitable"
|Must Haves
|Must Haves
Line 144: Line 139:
|Won't Haves
|Won't Haves
|-
|-
|Algorithm or Software that can use sensor data to categorize plastics
|Opening that people throw the trash into
|The dustbin should detect how full it is with simple indication
|Sensor for fullness detection
|The dustbin could have a small display to indicate how full it is
|(interactive) Display for more detailed fullness indication
|The dustbin won't actually recycle the plastics
|Mechanism to recycle plastics
|-
|-
|Be safe to use:
|Sensor Mechanism that can sense characteristics of plastics
 
|Simple fullness indication
*No sharp edges
|System for relaying fullness information to relevant staff
*No contact with mechanical parts
|Connection to underground storage
|Dustbin should be easy to use for untrained medical staff
|The dustbin could have an odor remover to remove unpleasant odors
|The dustbin will not have a underground storage which it is connected to
|-
|-
|Be easy to use:
|Algorithm or Software that can use sensor data to categorize plastics
 
|Way of identifying emptied plastic types for easy storage (e.g: color coded bags)
*Requires no training
|Odor remover to remove unpleasant odors
*Requires minimal decisions
|Mechanism for detecting contagious waste
|
|
|
|-
|-
|Different compartments to store the respective type of plastic
|Different compartments to store the respective types of plastic
|The dustbin should have a compartment
|Compartment for general waste
 
|Wheels to move through the hospital
For general waste  
|Mechanism for sterilizing contagious waste
|Possibly sterilize some of the contagious trash
|Won’t sort contagious waste
|-
|-
|Mechanism that puts incoming trash into appropriate compartment
|Mechanism that puts incoming trash into appropriate compartment
|
|Easy access to controller and mechanical parts for maintenance
|
|Mechanism that compresses the trash
|
|
|-
|-
|Once trash is inside it stays inside unless a professional empties the bins
|Must follow the hospital regulations <ref>http://www.hospitalbins.com/pdf/health_technical.pdf</ref>
|
|Updatable over the air
|
|
|
|
|-
|-
|Accessible, lockable additional opening that full bins can be emptied through
|Proper isolation of compartments, trash may not mix under any circumstances
|
|Mechanism that makes bin inaccessible when full
|
|
|
|
|-
|-
|Not leak any waste
|Once trash is inside it stays inside unless a professional empties the bins
|Should be relatively easy to handle errors.
|The dustbin should have a compressing mechanism to compress plastic trash
|The dustbin won’t sterilize contaminated waste
|-
|The size of the dustbin should be small enough to fit in a hospital (maybe define better dimensions later on)
|Updatable over the air
|When full, the dustbin can let the hospital site manager know
|
|
|-
|The dustbin must be accessible at all times, unless it if full, or someone is unloading the trash
|
|
|Wheels to move through hospital
|
|
|-
|-
|The different compartments must be well isolated from each other as to not mix
|Accessible at all times, unless it is full, or someone is unloading the trash
|
|
|
|
|
|
|-
|-
|Must follow the hospital regulations
|Accessible, lockable additional opening that full bins can be emptied through
|
|
|
|
|
|
|-
|-
|Mechanism that puts incoming trash into appropriate compartment
|Appropriate dimensions, fits through doors and inside corridors<ref>https://healthfacilityguidelines.com/ViewPDF/ViewIndexPDF/iHFG_part_c_space_standards_dimensions</ref>
|
|
|
|
|
|
|-
|-
|Different compartments to store the respective types of plastic
|Be easy to use:
 
*Requires no training
*Requires minimal decisions
|
|
|
|
|
|
|-
|-
|Opening that people throw the trash into
|Be safe to use:
 
*No sharp edges
*No contact with mechanical parts
|
|
|
|
|
|
|}
|}
[[File:Use-case Flowchart.png|thumb|821x821px]]
[[File:Use-case Flowchart.png|thumb|870x870px|Flowchart illustrating the streamlined process of medical waste disposal, classification, and compression with the use of our Bin design  (generated in Dia)|center]]


===Use Cases===
===Use Cases===
As we continue to design our medical plastics waste sorting bot, it is important to consider all of the different functionalities it will need to have in order to effectively sort the waste. One key aspect of this is the ability for the design to appropriately perform in all potential circumstances. To achieve this, we have identified several specific use cases and the corresponding functionalities of our bin. These use cases represent one step in the process of creating our final project, as we work towards a fully functioning system for medical plastics waste recycling.
The figure above depicts the process through which each piece of waste can be disposed of appropriately.
The following use cases describe this and additional processes that the bin needs to handle:
#'''Disposing waste:''' The bin allows the access of the piece into the inside of it. The waste is scanned by the sensor mechanism, which uses its algorithm to identify the type of plastic it contains. The piece of waste is then placed in the respective compartment for the specific type of plastic, which is clearly labeled on the outside of the bin.
#'''Classifying waste:''' Upon receiving waste, it is scanned and classified in the correct category. The sensor mechanism identifies the type of plastic, and the algorithm categorizes it accordingly.
#'''Sorting waste:''' Upon classifying the waste correctly, the bin uses the sorting mechanism to sort the waste into its respective compartment. The sorting mechanism ensures that each type of plastic is stored in its designated compartment, preventing contamination and making it easier for recycling companies to process the materials.
#'''Signaling fullness:''' When the bin gets full, a sensor will activate. The bin closes temporarily until an employee empties it. A signal is sent to the management team to let them know the bin is full. This feature ensures that the bin is emptied before it overflows, preventing litter and potential health hazards.
#'''Disposing non-plastic:''' The bin allows the access of the piece into the inside of it. The waste is scanned, and it is noticed that the piece does not contain plastic. The piece of waste is then placed in the compartment for unknown substances, which is separate from the compartments for plastic.
#'''Compressing the waste:''' The bin can use a combination of weight and IR sensors to determine if the waste is compressible or not, and if it is, it can compress the waste to fit more plastics in it. This feature maximizes the bin's capacity and reduces the frequency of emptying.
#'''Emptying the bin:''' Upon arriving at the bin the employee will empty each full compartment individually, taking the plastic waste to the appropriate recycling unit for further processing. After emptying, the bin will resume normal operation.
#'''Sterilizing the waste:''' This feature is not included in the design.
[[File:Blender Bin Design.png|thumb|3D Model of the Bin Design (frontal view) (generated in Blender)]]


#'''Disposing garbage.''' The bin allows the access of the piece into the inside of it. The garbage is scanned, în order to figure out which kind of plastics it contains. The piece of garbage is then placed în the compartment for the specific type of plastic. Then the bin s
#'''Classifying garbage.''' Upon receiving garbage, it is scanned and classified in the correct category.
#'''Sorting the trash.''' Upon classifying the trash correctly, the dustbin uses the sorting mechanism to sort the trash into it’s respective compartment
#'''Signaling fullness.''' When the bin gets full, a sensor will activate. The bin closes temporarily until an employee empties it. A signal is sent to the management team to let them know the bin is full.
#'''Disposing non-plastic.''' The bin allows the access of the piece into the inside of it. The garbage is scanned, and it is noticed that the piece does not contain plastic. The piece of garbage is then placed în the compartment for unknown substances.
#'''Compressing the trash.''' The dustbin can use a combination of weight and IR sensors to determine if the trash is compressible or not, and if it is, it can compress the trash to fit more plastics in it
#'''Sterilizing the trash.'''


<br />
After establishing the MoSCoW list of requirements and considering several use cases for our medical plastics-waste sorting bot, we focused on developing a detailed design that would meet each of these requirements. To aid in this process, we created a 3D model of the exterior of the trash bot, which allowed us to visualize the physical layout and design of the bot before moving forward with considering its specific components.
[[File:Blender Model of the Bin Design.png|thumb|3D Model of the Bin Design (generated in Blender)]]
[[File:Blender Model Inside of the Bin.png|thumb|3D Model of the Bin Design (inside) (generated in Blender)]]
The figures to the right show our design, which features an opening, through which users can dispose of waste easily. The blue screen next to the opening functions as a display for important information regarding the status of the bot, such as when a compartment is full and requires emptying. The bot's seven separate compartments are clearly visible in the image, each with its accessible, lockable opening. The compartments can be emptied individually, allowing for efficient disposal and recycling of plastic waste.
 
Furthermore, our 3D model depicts a cable extending from the trash bot into the wall, indicating that the bot will be powered via a standard electrical outlet. This will allow for consistent and reliable operation of the trash bot, ensuring that it is always accessible to hospital staff and functioning properly to sort medical plastic waste.


===Argumentation design choices===
We chose to specifically design our automated waste sorting system in the form of a bin, as this approach would allow hospital staff to easily and safely dispose of waste without requiring extensive training or knowledge of plastic sorting. Additionally, the automation process ensures that waste is sorted accurately and efficiently, minimizing the environmental impact of medical waste.


====non-infectious vs infectious====
In the following section, we will delve into the specific functionalities and components of our medical plastics waste sorting bot design in greater detail.
For the bin, the choice was made to only focus on non-infectious plastics for the bin. This will result in the product only sorting the non-infectious plastics. It is important to make a decision on whether to collect non-infectious or infectious plastics. When the two are mixed, all the plastics need to be treated like infectious waste. The treatment of infectious waste is a lot more expensive than the treatment of non-infectious waste, so a mixture of the two will only result in more, unnecessary costs. There are some reasons why the choice was made to sort the non-infectious plastics with this bin instead of the infectious plastics. First, about 85% of medical waste is general, non-infectious waste<ref>Health-care waste (who.int)</ref>. This means that when the bin focuses on the non-infectious waste it will have a lot more impact than when it focuses on the infectious waste because there will be a lot more waste to sort. Furthermore, non-infectious plastics can immediately be recycled in the Recycling stream of general waste. When the plastics are infectious, the plastics first have to be sterilized. This will not be possible with just this bin, which results in an even harder process because an extra machine should be added.  


<br />
<br />


===Separating Between Different Types of Plastics===
===Argumentation for our Design Choices===
 
====Separating between Non-infectious vs infectious Waste====
For the bin, the choice was made to only focus on non-infectious plastics for the bin. This will result in the product only sorting the non-infectious plastics. It is important to make a decision on whether to collect non-infectious or infectious plastics. When the two are mixed, all the plastics need to be treated like infectious waste. The treatment of infectious waste is a lot more expensive than the treatment of non-infectious waste, so a mixture of the two will only result in more, unnecessary costs. There are some reasons why the choice was made to sort the non-infectious plastics with this bin instead of the infectious plastics. First, about 85% of medical waste is general, non-infectious waste<ref name=":2">World Health Organization: WHO. (2018, February 8). ''Health-care waste''. <nowiki>https://www.who.int/news-room/fact-sheets/detail/health-care-waste</nowiki></ref>. This means that when the bin focuses on the non-infectious waste it will have a lot more impact than when it focuses on the infectious waste because there will be a lot more waste to sort. Furthermore, non-infectious plastics can immediately be recycled in the Recycling stream of general waste. When the plastics are infectious, the plastics first have to be sterilized. This will not be possible with just this bin, which results in an even harder process because an extra machine should be added. 
 
====Separating Between Different Types of Plastics====
According to a report by the Healthcare Plastics Recycling Council (HPRC), most healthcare plastic products, that qualify for recycling, fall within five primary applications:  
According to a report by the Healthcare Plastics Recycling Council (HPRC), most healthcare plastic products, that qualify for recycling, fall within five primary applications:  


Line 270: Line 271:
According to our user research the best way of sorting our plastics in a way that maximizes the chances of it being recycled is by creating single material waste streams. If done reliably and with little to no contamination with other materials, this provides waste handlers with high quality material that requires minimal processing before recycling. However there exists a trade-off with regard to the detail of separation between the quality of the waste stream on the one hand and the logistic cost of storage and transportation on the other. If we separate the plastics into all seven categories of healthcare plastics, we create additional costs for both the hospitals and the waste handlers in having to store and transport these plastic types separately. We might consider grouping plastic types together, based on their role in traditional mechanical recycling processing.
According to our user research the best way of sorting our plastics in a way that maximizes the chances of it being recycled is by creating single material waste streams. If done reliably and with little to no contamination with other materials, this provides waste handlers with high quality material that requires minimal processing before recycling. However there exists a trade-off with regard to the detail of separation between the quality of the waste stream on the one hand and the logistic cost of storage and transportation on the other. If we separate the plastics into all seven categories of healthcare plastics, we create additional costs for both the hospitals and the waste handlers in having to store and transport these plastic types separately. We might consider grouping plastic types together, based on their role in traditional mechanical recycling processing.


The recycling industry commonly differentiates between seven resin types, of which five overlap with our medical plastics categorization: PET, HDPE, LDPE, PP and PS. These plastics are easily recyclable in the current recycling system. <ref>https://www.rts.com/blog/the-complete-plastics-recycling-process-rts/</ref>
The recycling industry commonly differentiates between seven resin types, of which five overlap with our medical plastics categorization: PET, HDPE, LDPE, PP and PS. These plastics are easily recyclable in the current recycling system. <ref>[https://www.rts.com/blog/the-complete-plastics-recycling-process-rts/ RTS - Recycle Track Systems. (2022, October 28). ''The Complete Plastics Recycling Process - Recycle Track Systems''. Recycle Track Systems. https://www.rts.com/blog/the-complete-plastics-recycling-process-rts/]</ref>


While separating the plastic waste into these resin types is possible, either through manual labor or automation, it can be very inefficient. Especially when mixed with the municipal waste stream, as it is currently often done, a lot of contaminants and lots of inefficiencies are introduced.<ref>C. Rizan, F. Mortimer, R. Stancliffe, M.F. Bhutta; Plastics in healthcare: time for a re-evaluation; J. R. Soc. Med., 113 (2020), pp. 49-53</ref>
While separating the plastic waste into these resin types is possible, either through manual labor or automation, it can be very inefficient. Especially when mixed with the municipal waste stream, as it is currently often done, a lot of contaminants and lots of inefficiencies are introduced.<ref>C. Rizan, F. Mortimer, R. Stancliffe, M.F. Bhutta; Plastics in healthcare: time for a re-evaluation; J. R. Soc. Med., 113 (2020), pp. 49-53</ref>
Line 289: Line 290:
#Multi Materials
#Multi Materials
#Other
#Other
#


====The Sensors====
[[File:Other spectra lmao.jpg|thumb|409x409px|Hyperspectral spectra for the studied plastics. <ref name=":4">[https://www.sciencedirect.com/science/article/pii/S0924203121001247 Henriksen, M. L., Karlsen, C. B., Klarskov, P., & Hinge, M. (2021). Plastic classification via in-line hyperspectral camera analysis and unsupervised machine learning. ''Vibrational Spectroscopy'', ''118'', 103329. https://doi.org/10.1016/j.vibspec.2021.103329]</ref>]]
To '''sort the different types of plastics correctly''', we have chosen to make the plastic classification via in-line hyperspectral camera analysis and unsupervised machine learning. This technology has been developed by Aarhus University together with the Danish Technological Institute and a team of Danish companies; Dansk Affaldsminimering, Makeen Energy and Dansk Retursystem. It is a brand new , innovative technology that differentiates between the types of plastic based on the chemical composition of the waste, thus increasing the accuracy of the sorting process. In order to do this, the system  applies unsupervised machine learning on short wave infrared hyperspectral data to build a model for classification of plastics.


===Design Choices===
Even though the hyperspectral system is a very new and quite expensive technology, we chose it due to its perks over the usual plastic sorting technologies. The most used plastic sorting technique nowadays is Near Infrared Spectroscopy, completed by human sorting. The technology uses near-infrared region of the electromagnetic spectrum to measure the absorbance and scattering of light of specific resins <ref name=":3">https://www.solidscanner.com/en/basics-and-limitations-of-nirs-nirs-and-how-it-is-used-in-plastic-recycling/</ref>. These resins are solid or liquid synthetic organic polymers that are used as the basis of plastics. To translate, NIR spectroscopy is used to identify the absorption bands of different types of plastic, thus providing the information needed to separate them <ref name=":3" />. When looking at the advantages of Near Infrared Spectroscopy, one can find that it is a very fast technique which is also non-destructive, meaning that the plastic can be recycled after being analyzed.  However, the disadvantages of this technology are quite significant as well. Most importantly, it does not provide accurate results when the plastic sample is too small, transparent or filled with carbon black. This is why, many times, NIR sorting is completed by human workers.


This is the main reason why we chose the hyperspectral camera system over the NIR. Both systems come at quite a high cost, however, the hyperspectral camera represents a highly promising alternative, designed to overcome the obstacles of the NIR, thus completely automating and improving the sorting process.


In order for our bin to '''sort different types of plastics correctly''', we have chosen to make the plastic classification via in-line hyperspectral camera analysis and unsupervised machine learning. This technology has been developed by Aarhus University together with the Danish Technological Institute and a team of Danish companies; Dansk Affaldsminimering, Makeen Energy and Dansk Retursystem. It is a brand new , innovative technology that differentiates between the types of plastic based on the chemical composition of the waste, thus increasing the accuracy of the sorting process. In order to do this, the system  applies unsupervised machine learning on short wave infrared hyperspectral data to build a model for classification of plastics. Besides increaced accuracy, we have also chosen this model for the future perspective of replacing any kind of manual sorting with an automated one. The system currently is capable of differentiating among 12 types of plastics, however we want to adapt it to our 7 categories of plastics. The bin will also have another bin, besides the 7 plastic ones, for any waste not fitting into the 7 plastic types.
Having all of this in mind, a good way to work with materials, identify them or define their properties is to study how light interacts with them. The hyperspectral camera recognizes materials based on their spectral signatures (how much light is absorbed/ reflected/ transmitted). A spectrum represents the amount of light in different wavelengths. The hyperspectral sensors collect information as a set of 'images'. Each image represents a narrow wavelength range of the electromagnetic spectrum, also known as a spectral band.  


For the '''mechanism that puts incoming trash into appropriate compartment''' we decided to use a conveyor belt, as it is a reliable, easy to control mechanism that was also tested alongside the aforementioned hyperspectral camera system.
The data collected by the hyperspectral sensors is processed using principal component analysis (PCA) and K-means clustering for differentiating the types of plastic.


The bin has also '''a digital signaling system''' for the case in which at least one of the bins is full. When the bin is full, the bin will close and a warning signal will be sent to the waste management of the hospital. We want to achieve this by using a distance sensor. After doing some research , we have found two types of distance sensors specifically designed for waste bins<ref>http://en.benewake.com/news/detail/5da03c994d839408076b615b.html</ref>:  
When it comes to the setup of the hyperspectral system, two rows of four halogen spots (12 V, 20 W) illuminating it at a 45° angle are used. The line-scan hyperspectral camera should be equipped with a spectrograph (QiSpec, QT5022K-I320-SWIR, Qtechnology, DK).
 
Besides increased accuracy, we have also chosen this model for the future perspective of replacing any kind of manual sorting with an automated one. The system currently is capable of differentiating among 12 types of plastics, however we want to adapt it to our 7 categories of plastics. The bin will also have another bin, besides the 7 plastic ones, for any waste not fitting into the 7 plastic types.[[File:Benewake CE30 Series 3D LiDAR Sensors .png|thumb|How Benewake CE30 Series 3D LiDAR Sensors  work for large and wide waste bins]]The bin has also '''a digital signaling system''' for the case in which at least one of the bins is full. When the bin is full, the bin will close and a warning signal will be sent to the waste management of the hospital. We want to achieve this by using a distance sensor. After doing some research , we have found two types of distance sensors specifically designed for waste bins<ref>http://en.benewake.com/news/detail/5da03c994d839408076b615b.html</ref>: [[File:Fullness sensor for tall but small waste bins.png|thumb|How Benewake TF Series Distance Sensors work for tall and narrow waste bins]]


*The Benewake TF Series Distance Sensors
*The Benewake TF Series Distance Sensors
*The Benewake CE30 Series 3D LiDAR Sensors
*The Benewake CE30 Series 3D LiDAR Sensors


[[File:Fullness sensor for tall but small waste bins.png|thumb|How Benewake TF Series Distance Sensors work for tall and narrow waste bins]]
[[File:Vertical-ram.jpg|thumb|Ram of a Vertical Compactor]]
The two categories of sensors are specially created for a specific type of bin, asshown in the two figures on the side. Having in mind that our product must have the most efficient space design for the 8 bins, we chose to use the Benewake TF Series Distance Sensors, as the bins will be tall and narrow.  
The two categories of sensors are specially created for a specific type of bin, as shown in the two figures on the side. Having in mind that our product must have the most efficient space design for the 8 bins, we chose to use the Benewake TF Series Distance Sensors, as the bins will be tall and narrow.
[[File:Benewake CE30 Series 3D LiDAR Sensors .png|thumb|How Benewake CE30 Series 3D LiDAR Sensors work for large and wide waste bins]]
 
====The Compression Mechanism====
One of the features that could be added to the design is a '''trash compressing mechanism'''. The best solution to achieve this would be by using a vertical compactor. These compactors have a small footprint and are perfect to use in small, crowded spaces, like hospitals.  When the compactor chamber is full, its ram is activated by a switch causing the ram to move down on the waste and compress it.
 
The process of a vertical compactor creates a bale or block that can be used for recycling. After the containers are full, they can be kept on site to decrease the frequency of pickups and therefore, also transportation and disposal costs.<ref>[https://www.iqsdirectory.com/articles/baler/compactors.html ''Trash Compactors: Types, Uses, Features and Benefits''. (n.d.). https://www.iqsdirectory.com/articles/baler/compactors.html]</ref>
 
===Amount of waste in the bin===
Per patient per day between 25 pounds and 34 pounds of waste of produced<ref>''Waste - Sustainability Roadmap''. (n.d.). <nowiki>http://www.sustainabilityroadmap.org/topics/waste.shtml#.ZDG5SHZBxPY</nowiki></ref>. Of this waste, about 20% to 25% are plastics<ref>Jain, N., & LaBeaud, D. (2022). How Should US Health Care Lead Global Change in Plastic Waste Disposal? ''AMA Journal of Ethics'', ''24''(10), E986-993. <nowiki>https://doi.org/10.1001/amajethics.2022.986</nowiki></ref>. When we take an average of both these number this will mean approximately 6,64 pounds of plastic waste per patient per day. In the bin we designed only collects general, non-infectious waste. Of the 6,64 pounds of plastic waste about 85% of it is general waste, so approximately 5,64 pounds of general plastic waste per patient per day which our bin can collect<ref name=":2" />. When calculating this in kilograms this will be approximately 2,5 kilograms. To estimate how much fits into the bin the number of liters per kilogram was calculated. This calculation is based on the assumption that 1 kilogram of plastic was equals approximately 26,32 liters<ref>''Convert waste volume to weight – Your description''. (n.d.). BRANZ. <nowiki>https://www.branz.co.nz/sustainable-building/reducing-building-waste/assessing-waste/volume-weight/</nowiki></ref>. The measurements of one compartment in our bin are 30x60x90 cm which means that 162 liter fits into one compartment. Our bin will have 7 compartment which means that 1134 liter of plastic waste will fit in total in our bin. Assuming that indeed one patient produces 2,5 kilograms of plastic waste per day and that 1 kilogram equals 26,32 liters, approximately the plastic waste of 17,2 patients can be collected by one bin per day. This is however assuming that the different types of plastics are equally divided so that all the compartments are full at the same time. This will most likely not be the case so the expectation is that the bin has to be unloaded earlier. On the other side, there will be a compressor in the bin which causes a significate decrease of the volume of the plastic waste which will mean that more waste can be collected by the bin. So keeping these factors in mind, the estimation is that the bin will be able to collect at least the plastic waste of 17,2 patients per day, and probably even more. 
 
===Technical Design Decisions===
 
====Motors and Actuators====
[[File:Vertical Movement of the Trashbox.png|thumb|Vertical Movement of TrashBox]]
The main movement is the vertical positioning of the rectangular box containing the trash, when it is first inserted in the dustbin. For now, lets call this the the 'trash box'. The trash box needs to move vertically (on the y axis); it needs to be really accurate and fast. It also needs to be able to support heavy weight if someone throws some heavy trash in their. Hence, for optimal precision, the best type of motors to use will be Stepper Motors, more accurately a close loop bipolar stepper motor.<ref>https://ieeexplore.ieee.org/abstract/document/4510518</ref>
 
Stepper motors are easily available and are used very commonly for CNC applications and 3-d printers, which means there are plenty tutorials on how to control them precisely. A NEMA 23 Stepper Motor seems ideal for the use cases describe above. It is more advisable than a NEMA 17 as it can hold more weight, and can go faster than a NEMA 17 Motor. According to StepperOnline<ref>https://www.omc-stepperonline.com/support/what-is-the-maximum-speed-highest-frequency-of-the-stepper-motor</ref>, a NEMA 17 can go up-to 3000 RPM, and it has a maximum thrust up-to 27kg when supplied 3A of current. <ref>https://novantaims.com/hybrid-stepper-motor/lm23-nema-23-3-0a-1-8-external-linear-stepper-motor/</ref>. All of these specification cover the use cases for vertical movement perfectly. To achieve fast movement, it is not advisable to use a nut screw for movement like many 3d printers do, rather it is better to use a belt driven movement system. This<ref>https://www.youtube.com/watch?v=NTW2Be1pOGw</ref> is a good tutorial which explains Belt Driven vs Screw Driven CNC movement systems.
 
The trash box does need to open and close. The motors in there need to be durable, and should have enough holding torque such that if a heavier than expected object is thrown into the trash box, then the doors of the trash box do not open. High Powered small servos such as this one<ref>https://www.conrad.nl/nl/p/motor-micro-servo-high-powered-high-torque-metal-gear-mg92b-adafruit-2307-1516601.html</ref> would be ideal for this task. The optimal trash box door would need 2 servos similar to this one, as these servos have high torque and metal gears which ensure that they wont break under high load. Each servo can be placed on one side of the door, serving as a hinge. If 2 servos fail to do the job in the prototype, it will be advisable to make use of 4 servos, where you have 2 for each door.
[[File:The doors of the Trash Box.png|thumb|The doors of the trash box]]
 
 
A should have listed on the Moscow list, is a vertical ram system for trash compression. For this, powerful electric linear actuators are needed. Electric Linear Actuators are a type of actuator that converts energy and signals into a linear motion, in other words a backward or forward motion. This linear motion is then used to tilt, lift, push or pull an object where force is required. This can be done through electrical AC and DC motors, or hydraulics and pneumatics<ref>https://nl.rs-online.com/web/c/mechanical-power-transmission/electric-actuators/electric-linear-actuators/</ref>.
 
Many actuators are available, but unfortunately they are really expensive, it might be advisable to make one ourselves. As this is a should have and not a must have, for a prototype, this is one part that can be skipped!
 
====Material Choices====
The outside of the actual dustbin should be made using 3003 Aluminum Sheets. The reason this is optimal is because it is easily available, cheap, paintable, and it has superior corrosion resistance and is easy to work with. All the sharp edges can be contoured such that it does not harm anyone, and thus it would fulfill the 'must have' condition of being safe. Furthermore, 3003 Aluminum is strong and durable enough for the current use cases. Its tensile yield strength averages around 27000 Psi and ultimate strength averages around 29000 Psi<ref>https://www.thomasnet.com/articles/metals-metal-products/3003-aluminum/</ref>. Tensile Yield strength basically means the maximum amount of strength that can be applied before the aluminum deforms permanently. However, this is not needed for a prototype, for making a prototype for demonstration purposes, only a skeletal model of the dustbin is required. The most important factor is to make sure it is stable, the movement mechanism can still happen, and that the correct dimensions can be achieved. Thus, it is advisable to use 40mm x 40mm T-Slot Aluminum Profiles to make a prototype. These profiles can be milled to the exact dimensions required for the machine by many different manufacturers in the Netherlands, as these profiles are very commonly used for CNC machines. They are durable, and strong enough for a prototype. The fact that they are used by many hobby CNC makers, makes these profiles very easy to use and build stuff with, and there are a lot of guides on the internet on how to go about working with T-Slot aluminum profiles. These profiles should be used to make an outer skeletal frame of the dustbin, and all the other parts of the dustbin can be secured to these profiles. Since they are used for CNC machines, manufacturers are obliged to mill these profiles with precision.
[[File:Profile-5-20x20mm.jpg|thumb|T-Slot Aluminum profile from Google Images]]
<br />
 
====Dimensions====
The length of the machine will be quite long, approximately 320 cm long. We have 7 compartments, and possibly one trash compressor, which would require us to have atleast 30*8 = 240 Cm of length. If we want to leave a gap of 10 centimeters in between all of the bins, and the edges of the machine, then thats 80 more cm. While one can argue that the dustbin is too long, it needs to be placed correctly in the hallway, and all 7 compartments are necessary for the use cases.
 
For the height of the machine we have a 10 cm raise from the bottom, 5 cm for the wheels, a 90 cm tall bin, a sorting box which is 30 cm tall, and the roof of the machine, which will be around 10 cm long, making the whole machine approximately 1.3 m tall. The width of dustbin needs be around 0.8m wide.
 
====Micro-Controllers====
Training a Neural Network with all the different items takes a lot of time, but luckily the training doesn't need to be done in the dustbin itself, classification does though! Luckily, classification is done way faster, but the speed does depend on the processor of the micro-controller. Hence, it's more advisable to use an STM32 based micro-controller over an Arduino. An STM 32 has a 32-bit processor while a regular Arduino UNO has an 8-bit processor. STM32 pays more attention to engineering practice. In fact, there are many simple instruments in the factory, such as temperature controllers, ordinary motor controllers, low-end PLCs, and some civilian toys, game controllers, wired keyboards and mice, and other peripherals and so on are very practical<ref>https://www.orientdisplay.com/stm32-vs-arduino/</ref>. While it is harder to program using the STMCube IDE (standard STM 32 IDe), it is also something which has a lot of documentation online and many tutorials are available. A good beginner STM 32-bit board is the Nucleo-F446Re, its pin configuration it similar to that of an Arduino Uno, and it can also be programmed using the Arduino IDE, making the board easier to use and understand for the purposes of making a working prototype<ref>https://www.st.com/en/evaluation-tools/nucleo-f446re.html</ref>.
[[File:2023-04-10 21-07.png|thumb|Nucleo STM32 from the Nucleo Website]]
<br />
 
====Other Components====
The board unfortunately does not come inbuilt with a Wifi module, so a separate ESP8266 Wifi Module is necessary for OTA-updates and for ensuring internet connection with the dustbin. Another component necessary would be motor drivers for the NEMA 23 Stepper Motor; the TB6600 is a popular and easy to use choice, and is compatible with the recommended motor<ref>https://www.tinytronics.nl/shop/en/mechanics-and-actuators/motor-controllers-and-drivers/stepper-motor-controllers-and-drivers/hy-div268n-5a-tb6600-stepper-motor-controller-5a-8-42v</ref>.
 
One of the could haves listed in the in the Moscow list above is an interactive display for the user. A display which indicates how full the dustbin is, would be really helpful for a prototype. There are many displays available on the market, and they also have touch screen, although for ease of use and connectivity for the prototype, it will be better to use an O-Droid unit! Odroid is a company which makes peripherals for a variety of a embedded systems applications! The Odroid VU-5A is a 5-inch display unit, with android built in <ref>https://www.sossolutions.nl/odroid-vu5a-5inch-hdmi-display-inclusief-multi-touch-en-audio</ref>. Furthermore, this display can be connected to the STM-32 board, and it can give commands as it has serial output. The fact that this has android built in, will be really convenient as it is fairly easy to set up a basic android application with serial communication amongst the STM32 board and the O-droid unit; a fancy GUI displaying the properties of the dustbin is not really necessary for the prototype.
 
==== Cost Analysis ====
[[File:We.png|alt=Approx |thumb|Cost Sheet --> Approx 200 Euros for a prototype]]
For a prototype, we made a detailed cost analysis with the bare-minimum requirements who's purpose is to just test out sorting and movement. Keep in mind that the costs of items are found online, and can differ from website to website, and are rough approximations of what the cost in right now. The most expensive part is the hyper-spectral camera. It is a relatively new technology compared to everything else and is also the hardest to source. For the dustbin to manufactured and available publicly, this is the biggest cost challenge out of all the items. [[File:Odriod.png|thumb|Odroid Module from the Website]]
<br />
<br />
==Discussion==
For the bin we tried to have the research on the design and the technical parts of the bin as completed as possible but due to lack of time we did not manage to look into every part of the bin and the process around the bin. So there are still a couple of things we think should be researched more.
Firstly within this project we considered the inclusion of a compression mechanism. This can be a very useful addition to the bin because plastic waste mostly takes much more volume than needed. With the implementation of a compressor as much waste as possible will fit into the bin which results in a longer period between unloading the bin. This will be cost efficient as well as time efficient because the bins have to be unloaded less so less staff is needed to unload the bins and less time needs to be spent on constantly unloading the bins. A rough design of the compressor is already included within our final design, but more research would be needed to realize the implementation.
Secondly one of the main issues we encountered during the development of our product was the challenge of sterilizing contaminated waste. While our product could function effectively in a medical context, it was clear that implementing a sterilization mechanism that would function efficiently and reliably would be difficult. As a result, we decided not to tackle this issue and instead focus on the sorting aspect of waste management. In addition the medical sector presents a highly regulated environment, where specifically plastic products such as packaging or certain tools will often be regulated through centralized bodies such as the Food and Drug Administration (FDA)<ref>Center for Devices and Radiological Health & Center for Devices and Radiological Health. (2018, March 22). ''Code of Federal Regulations (CFR)''. U.S. Food And Drug Administration. <nowiki>https://www.fda.gov/medical-devices/overview-device-regulation/code-federal-regulations-cfr</nowiki></ref>. A considerable and potentially more effective way of increasing non-infected plastic-waste recycling in american hospitals might therefore lead through regulated and standardized labeling on packaging that helps easily identify and discriminate between different types of plastics. This means that while our product could function well in a medical context and brings with it considerable benefits, the medical sector might not be the most optimal context for our type of product. Since plastic waste is produced in many different contexts and the sorting algorithm and design parameters could easily be altered to fit a different context, our design could be useful in other fields like manufacturing, public places, schools or more. 
Furthermore, we think it would be very helpful if a signal can be send to the waste management system so that they can keep track of which bin is how full and when it needs to be unloaded. This will help the waste management system to work more efficiently because they don’t have to spend time to check the bins if they have to be unloaded, instead they exactly know which bin they have to unload. This also ensures that no problem arises with bins not opening up because they are full. To make this implementation as useful as possible more research needs to be done.
Lack of knowledge about the Danish sorting algorithm is also a big issue to tackle. We were not able to figure out how accurate the the classification process was as we were not able to get access to the Neural Network ourselves, and there is not enough information for us to determine the speed of recognition, or to validate the training process of the Neural Network, as it is really new
Another problem we were not able to find a solution for is how to deal with waste thrown into the bin which are multiple objects or objects which are not only made of plastic but also different kinds of materials. For the bin a hyperspectral camera is used. When multiple objects are thrown in at ones, it is likely that the camera will analyze only one of the objects. When this happens and the other object is of a different kind of plastic, the machine will throw both of the objects in the compartment where the object that it detects should be sorted. When the other object which is not detected is of another type of plastic, it will mix up the sorting process. Different types of plastic will be mixed up in that compartment which will cause problems in the recycling process, which may even be harmful. Therefore, it is really important that there comes a solution to this problem. Somewhat the same problem occurs when an object with multiple materials is thrown into the bin. Here the camera will most likely again analyze one of the materials. Which of the materials it detects will decide in which compartment of the bin the object will be thrown. However, when there are two kinds of materials and the object comes into a compartment which only collects a specific type of plastic, it will mix up this sorting process as well. One of the solutions we though of for these problems is a rotation camera, so it detects different angles of the object and in this way also detects if there are multiple materials. This can be a good solution for when there is one object with multiple materials. The machine should however know what to do in this situation, in which compartment it should throw the object. For the problem with multiple objects the rotating camera can also be part of the solution. However, there should still be thought of the best way to make sure that the different objects are both being thrown into the right compartment after being analyzed.
Lastly, we recognized the importance of conducting user research to ensure that our product meets the needs of its users. While we sent an email to 50 American hospitals requesting feedback on our product, we did not receive any useful responses in time to include in our project report. Moving forward, we believe that conducting more research and user analyses will be crucial to ensuring the success of our product.
==Conclusion==
During the research for the design concept of our product, we gained a lot of different kinds of perspectives on our project. Overall, we believe that a lot can be done to improve the level of recycling plastics in hospitals. Our product can be a good solution. However, we also came to the insight that it will be a hard task to design a bin which is complete to the level that it is efficient enough to make a real change. In hospitals there are a lot of extra factors which have to be taken into consideration when designing a product. Therefore, it would be better to first use the bin in different industries with less complex conditions. This will most likely mean that the bin should be adjusted to the plastic waste in that industry, but we believe this can be easily done by adjusting some elements of the bin. When the product proofs to be effective in a less complicated environment, the bin can be implemented into environments with more complex factors and waste management systems. In either environment, a lot of research still needs to be done to make sure the bin works well and is efficient. For now, it is hard to draw a conclusion on how effective the bin will be because this will depend on a lot of different factors, but because almost none of the plastics in hospitals are being recycled now, the smallest things can already make a difference.
==Appendix==
==Appendix==


Line 349: Line 423:
|
|
|Dhruv Manohar
|Dhruv Manohar
|
|1
|Team formation
|Team formation
|-
|-
Line 384: Line 458:
|
|
|Dhruv Manohar
|Dhruv Manohar
|
|0
|
|Was sick and had not found a team yet
|-
|-
|3
|3
Line 414: Line 488:
|
|
|Lazgin Mamo
|Lazgin Mamo
|5.5
|6
|meetings(3 hour) + research paper for importance of recycling bin (2 hours)+ writing the objective on wiki (0.5 hour)
|meetings(3 hour) + research paper for importance of recycling bin (2 hours)+ writing the objective on wiki (1 hour)
|-
|-
|
|
|Dhruv Manohar
|Dhruv Manohar
|
|11
|
|Meetings (3 Hours) + catching up with current work (2 hours) + research into sorting mechanisms (3 hours) + research into other sorting bins (2 hours ) + tutorial (1 hour)
|-
|-
|4
|4
Line 449: Line 523:
|
|
|Lazgin Mamo
|Lazgin Mamo
|7
|8
|meetings (3 hour)+ research primary users need and writing the wiki (4 hours)
|meetings (3 hour)+ research primary users need and writing the wiki (5 hours)
|-
|-
|
|
|Dhruv Manohar
|Dhruv Manohar
|
|12
|
|meetings + design team meetings + design research + research into motors and
|-
|-
|5
|5
Line 474: Line 548:
|
|
|Fenna Schipper
|Fenna Schipper
|
|10
|
|meetings +  research + writing argumentation design choices (infectious vs non-infectious)
|-
|-
|
|
Line 484: Line 558:
|
|
|Lazgin Mamo
|Lazgin Mamo
|
|10
|
|meetings + helping with Moscow list + researching technical needs for the robot
|-
|-
|
|
|Dhruv Manohar
|Dhruv Manohar
|
|11
|
|meetings + design research + research into CNC movement systems + research into stepper motors
|-
|-
|6
|6
Line 499: Line 573:
|
|
|Sonia Roberta Maxim
|Sonia Roberta Maxim
|12
|meetings, tutorial, research on should haves and could haves, writing argumentation on wiki
|-
|
|
|Marie Spreen
|16
|2 meetings, tutorial, edit moscow, flowchart, blender model bin, generate blender animation
|-
|
|
|Fenna Schipper
|11
|meetings + research design + sketching design of the bin
|-
|-
|
|
|Marie Spreen
|Hakim Agni
|10
|finding and contacting hospitals + cleaning up the wiki
|-
|
|
|Lazgin Mamo
|3
|due to sickness only joined meetings
|-
|
|
|Dhruv Manohar
|13
|meetings + research into micro-controllers + research into o-droid unit + research into materials
|-
|7
|Luta Iulia Andreea
|12
|2 meetings, research on how the hyperspectral system works, writing findings in wiki
|-
|-
|
|
|Fenna Schipper
|Sonia Roberta Maxim
|12
|meetings, economic analysis+ amount of waste, writing on wiki
|-
|
|
|Marie Spreen
|12
|meetings + blender animation + prep presentation
|-
|
|
|Fenna Schipper
|15
|meetings + research + writing amount of waste in bin
|-
|-
|
|
|Hakim Agni
|Hakim Agni
|12
|meetings + cleaning up the wiki + research
|-
|
|
|Lazgin Mamo
|12
|meetings + making the slides.
|-
|
|
|Dhruv Manohar
|16
|meetings + research into aluminum profiles and prototype techniques + making slides  + script for presentation + presentation prep
|-
|8
|Luta Iulia Andreea
|9
|presentation, finishing hyperspectral technology part and meetings
|-
|-
|
|
|Lazgin Mamo
|Sonia Roberta Maxim
|9
|presentation, cleaning up references and wiki editing, meetings
|-
|
|
|Marie Spreen
|9
|presentation + meetings + wiki editing
|-
|
|
|Fenna Schipper
|11
|meetings + writing discussion + conclusion + last checks wiki
|-
|-
|
|
|Dhruv Manohar
|Hakim Agni
|
|
|
|-
|
|
|}<br />
|Lazgin Mamo
 
|8
===Research and Literature study===
|peer review meeting and attending the presentations session and organizing wiki (problem statement and users)
 
|-
 
|
Fenna:
|Dhruv Manohar
 
|14
'''Recycling of medical plastics - ScienceDirect''' [https://www.sciencedirect.com/science/article/pii/S2542504821000348]
|meetings + putting everything on the wiki + research into cost analysis
 
|}<br /><references />5. https://www.sciencedirect.com/science/article/pii/B9780444638571000012
Conclusion:
 
Plastics have revolutionized medical industry, especially the single use plastic. The common method adopted for disposing medical plastics is incineration that can lead to the release of toxic chemicals and gases. Many of the plastics end up in marine ecosystems detrimentally affecting their survival. Usually, medical plastics are assumed to be infectious and cannot be discarded with the common municipal waste. Moreover, lack of sufficient landfills available have persuaded mankind to think of sustainable recyclable options. Most of the medical plastics have the potential to be recycled back into the petrochemical industry as a feedstock for the production of new plastics or refined fuels. There should be better awareness about recycling possibilities among the healthcare workers and the commitment to collect and recycle the plastic wastes is essential for a sustainable future. Most importantly the plastic devices should be designed such that it is easily recyclable. The outbreak of Covid 19 has increased our dependence on plastics in an unpredictable manner. The outcome would be drastic, finally affecting our future generations. Urgent measures should be taken to properly segregate, sterilize and recycle medical plastics. Multilayer plastics can be replaced by single layer plastics wherever possible. Current recycling strategies can be scaled up and integrated with new sustainable alternatives. This can reduce the accumulation of plastic waste to a certain extend.
 
'''Improving waste separation in hospitals - insights for intervention design | Project | BehaviourWorks Australia''' [https://www.behaviourworksaustralia.org/projects/improving-waste-separation-in-hospitals-insights-for-intervention-design]
 
Findings:
 
*One key influence was their access to the appropriate bins. Sometimes bins were placed far away in a corner, blocked by equipment or another (less appropriate) bin would be closer. With regards to recycling, we also learned that available recycling streams in the operating suites not only differed between hospitals but also between rooms within a hospital operating suite. This was sometimes due to a lack of space, where another bin simply wouldn’t fit into an already crowded room.
*We also found out that often by default large rather than small clinical waste bags were used in the operating rooms (even though exceptions exist).
*Time could work as a barrier or facilitator depending on whether nurses felt they had sufficient time to sort waste or had more pressing tasks to attend.
*Nurses’ self-assessed knowledge on correct waste sorting behaviour was fairly high, however, there was still room for improvement.
*Waste support staff also played a role in nurses’ waste separation behaviour. Nurses relied on support staff to line bins appropriately, empty them when full and transport waste out of the operating suite. Unsurprisingly, nurses also identified their colleagues as another key social influence.
*While nurses recognised the positive outcomes of reducing landfill and materials being reused if recycled, they expressed some lack of trust in the overall recycling process, wondering if the items they placed in the recycling bin would actually get recycled once they left the operating suite or the hospital.
 
 
'''Health-care waste (who.int)[https://www.who.int/news-room/fact-sheets/detail/health-care-waste]'''
 
Key facts
 
*Of the total amount of waste generated by health-care activities, about 85% is general, non-hazardous waste.
*The remaining 15% is considered hazardous material that may be infectious, toxic or radioactive.
*Every year an estimated 16 billion injections are administered worldwide, but not all of the needles and syringes are properly disposed of afterwards.
*Open burning and incineration of health care wastes can, under some circumstances, result in the emission of dioxins, furans, and particulate matter.
*Measures to ensure the safe and environmentally sound management of health care wastes can prevent adverse health and environmental impacts from such waste including the unintended release of chemical or biological hazards, including drug-resistant microorganisms, into the environment thus protecting the health of patients, health workers, and the general public.
 
 
'''A Study on AI‐based Waste Management Strategies for the COVID‐19 Pandemic - PMC (nih.gov)[https://www.ncbi.nlm.nih.gov/pmc/articles/PMC9083818/]'''
 
Conclusion
 
Overall, it can be seen that AI/ML‐based methods can be employed to improve the performance of several different activities in the waste management process that can provide a safe and scalable setup together with the physical measures as laid out in the discussion a long‐term waste management ‐strategy.
 
'''Hospital Waste Recycling: The Great Waste Recycling Revolution (tradebe.com)''' [https://www.tradebe.com/great-effort-behind-hospital-waste-recycling#:~:text=A%20Hospital%20Waste%20Recycling%20Revolution&text=Much%20hospital%20waste%20can%20be,can%20be%20sterilized%20and%20reused.]
 
''Waste produced by hospitals'' and other medical facilities is a ''largely invisible contributor to environmental degradation''. However, when one considers the wide array of establishments that produce medical waste, and the use of single-use sterile equipment across these facilities, their impact quickly becomes apparent. An incredible amount of waste is produced by health clinics, nursing homes, medical research laboratories, dentists, offices, veterinary clinics, and of course hospitals. Incredibly, around 85% of hospital waste is non-hazardous and non-infectious, according to the World Health Organization. The majority of that waste is recyclable, highlighting the need for a robust hospital waste recycling initiative to prevent these safe waste materials from reaching landfills.
 
 
'''AGV Scheduling Optimization for Medical Waste Sorting System'''<ref>https://www.hindawi.com/journals/sp/2021/4313749/</ref>
 
Key facts:
 
*Traditional manual order picking is extremely susceptible to infection spread among workers and picking errors, while automated medical waste sorting systems can handle large volumes of medical waste efficiently and reliably. Medical waste is infectious, toxic, and hazardous, thus, the application of automated sorting systems can greatly reduce the infection rate of operators and improve the efficiency of medical waste disposal compared with traditional manual sorting.
*The disposal process of medical waste mainly includes classification and collection, transportation, and recycling.
*Due to the large amount of medical waste that needs to be sorted, medical waste recycling and processing centers (MWRPC) face the requirements for small orders, high volume, and strict work schedules, which are similar to e-commerce warehouses.
*The recent outbreak of the novel coronavirus has stimulated the demand for medical services and protective equipment, causing the amount of medical waste to increase exponentially.
*Medical waste is usually divided into five categories: infectious waste, pathological waste, injury waste, pharmaceutical waste, and chemical waste.
*A vertical sorting system might be an optimal solution for sorting medical waste.
 
'''Medical Waste-Sorting and Management Practices in Five Hospitals in Ghana'''<ref>https://www.hindawi.com/journals/jeph/2020/2934296/</ref>
 
Hospital waste management in Ghana faces the risk of cross-contamination from the lack of thorough sorting of the waste at the points of generation. This has increased the potential for the spread of infections and chemical pollutant.
 
Conclusion:
 
A cross-sectional study of waste-sorting and management practices in five hospitals in Ghana has shown that even though there were attempts to segregate hospital waste, particularly in the high-risk areas, the lack of a uniform color coding and labeling system for the different categories of hospital waste affects the efficiency of collection and handling and the integrity of the final waste treatment processes. Significant differences in waste-sorting behavior among health staff were apparent only on the basis of occupation or work area. A number of incinerators for burning infectious waste are either not functioning or are operated outside their capacities or appropriate uses. Current incinerators are unable to inactivate pathogens. Chemical agents like PCDDs/Fs and PCBs are likely released in the exhausts, which calls for the need to install air pollution control devices (APCDs). It is recommended that refresher training courses are periodically organized for health workers to conscientize them on laboratory and general health safety. There is a need for an integrated approach to healthcare waste management in Ghana that will entail the coordinated efforts of the assemblies as well as the Ministry of Health and private companies contracted to collect, transport, and dispose of waste. Since 80–85% of wastes generated in health facilities are of no risk and comparable to domestic waste, they can be separated and handled together with the municipal waste streams while the infectious ones are treated specially, either on-site or sent to designated engineered incinerators.
 
 
'''Machine Learning and IoT-Based Waste Management Model'''<ref>https://www.hindawi.com/journals/cin/2021/5942574/</ref>
 
The waste-collecting trucks collect waste just once or twice in seven days. Due to improper waste collection practices, the waste in the dustbin is spread on the streets. Thus, to defeat this situation, an efficient solution for smart and effective waste management using machine learning (ML) and the Internet of Things (IoT) is proposed. In the proposed solution, there have used an Arduino UNO microcontroller, ultrasonic sensor, and moisture sensor. Using image processing, one can measure the waste index of a particular dumping ground. A hardware prototype is also developed for the proposed framework.
 
 
'''Module 2: The Healthcare Waste Management System'''<ref>https://cdn.who.int/media/docs/default-source/wash-documents/wash-in-hcf/training-modules-in-health-care-waste-management/module-11---classification-of-health-care-waste.pdf?sfvrsn=ee9ab82d_5<br /></ref>
 
A PowerPoint presentation about Waste Minimization in Health Facilities. For example:
 
*Inventory control in pharmacy and stockroom
*Employing reusable and recycled products
*Solvent recovery in the hospital laboratory
*Silver recovery in the x-ray department
 
 
'''Classification of Trash for Recyclability Status'''<ref>https://cs229.stanford.edu/proj2016/report/ThungYang-ClassificationOfTrashForRecyclabilityStatus-report.pdf</ref>
 
Conclusion:
 
The classification of trash into various categories; glass, paper, plastic, cardboard, metal and trash, is possible through machine learning and computer vision algorithms. Trash classification based on images of trash has been trained using both a support vector machine (SVM) and a convolutional neural network (CNN). However, in order to create a more accurate system, there needs to be a continuously growing data source and the optimal hyperparameters for the CNN must still be found.
 
 
Sonia:
 
'''Managing barriers to recycling in the Operating Room, The American Journal of Surgery'''
 
*It is very often unclear which Operating room items are recyclable and the greatest barrier to recycling is lack of knowledge.
*Up to 90% of “red-bag” waste does not meet criteria for “red-bag” waste - common items are mistakenly disposed of in red bags are vent tubing, suction tubes, IV bags, foley bags, foley catheters, masks, casts and splints, urinals, and bedpans.
*Addressing this issues could significantly reduce waste and save a lot of money
 
 
'''A circular healthcare economy; a feasibility study to reduce surgical stainless steel waste, Sustainable Production and Consumption. Elsevier.'''
 
Talks about reducing surgical stainless steel waste by recycling and sterilizing it. Presents several statistics on this topic and an experiment which in the end proves that a circular approach towards reusing discarded hospital instruments and stainless steel waste is indeed feasible and furthermore, it saves money.
 
 
'''Where does hospital waste go? medical waste disposal explained, CleanRiver.'''
 
*85% of hospital waste is noninfectious – most of these materials end up in landfills or get burned.  
*One of the biggest issues facing hospital waste challenges is “Over-classification” of waste related to “red bag” waste – they are filled incorrectly.“Over-classification” of waste refers to a large issue occurring in most medical facilities - regular waste, such as pop cans, bottles, paper, food waste, etc. end up being tossed in the “red bag” bins by patients or staff which are reserved to collect medical waste only.
*Problem: Red Bag waste can be up to 20X more expensive to haul than a hospital’s regular waste streams! Red bag waste is for anything contaminated with blood, infectious material, or other bodily fluids.
 
 
'''The recycling of medical waste (no date) Frst Solutions GmbH.'''
 
*2 million tons of medical waste produces yearly – best way to deal with this: shredded then wet steam sterilization.
 
There are companies specializes in this:
 
#AMB, a company based in Belgium
#ECODAS based in France
#WastinnovaIn, a company in Zimbabwe
 
 
'''A review on Medical Waste Management: Treatment, recycling, and disposal options, MDPI.'''
 
Lazgin<span> </span>:
 
*  the wastes from hospitals and health-care systems are not required to be treated to remove health-care chemicals. Municipal wastewater treatment plants are not designed to remove these chemicals and at best result in incomplete removal and lead to formation of transformation products, which may still be a concern in the environment. In some instances, the transformation products may even be more toxic than the parent compounds.
*Once released into the waste stream, the contaminants from health-care system are subject to several processes that affect how they move around the natural environment and how long they persist in the environment such as sorption, transformation, and degradation (both abiotic and biotic)
*'''Segregation and categorization of wastes are critical to minimize risk during handling and identify safe transport and treatment requirements'''.
*The concept of the “circular economy” is gradually being introduced across Europe. The circular economy moves away from a linear economy (make, use, and dispose) in theory enabling products and materials to last longer and virtually eliminating waste (The Waste and Resources Action Programme (WRAP), 2016).
*'''Identify if the waste needs to be classified'''—almost all health-care waste would need to be classified unless the material either is not waste or is identified in Article 2 of the Waste Framework Directive 2008/98/EC as being excluded as it is covered by other legislation
*'''Determine the chemical composition of the waste''' to determine if it has a hazardous property, which can be found through product manufacturer's safety data sheets,
*'''Assess the hazardous properties of the waste''' to see if it contains any of the following hazardous descriptions at relevant concentrations (Jones and Tansey, 2015):  H1: Explosive  H2: Oxidizing  H3A: Highly flammable  H3B: Flammable  H4: Irritant  H5: Harmful  H6: Toxic  H7: Carcinogenic  H8: Corrosive  H9: Infectious  H10: Toxic for reproduction  H11: Mutagenic  H12: Substances that release toxic gases  H13: Sensitizing  H14: Ecotoxic
 
 
'''Plastic Waste Recycling in Hospitals'''
 
Plastic waste recycling in hospitals is an important issue as medical facilities can generate a significant amount of waste. By weight, the plastic content of medical waste is around 25%. Included in this plastic waste is medical equipment, single-use items and packaging. All of these contribute to the overall waste stream. Historically, medical wastes have been disposed of in landfills or treated in incinerators. These incinerators were poorly designed and inadequately controlled and as a result, some hazardous pollutants were produced from the incineration of medical waste. So it seems that landfills are a better solution for disposing of medical waste. An issue with this, however, is that plastic has a low recovery rate. This leads to plastic waste occupying most landfill space, which is already limited<ref>https://www.sciencedirect.com/science/article/abs/pii/S0956053X02000065</ref>. Therefore recycling the plastic waste is ideal, as to preserve landfill space for other medical waste.
 
In reality, recycling programs in hospitals are often limited. Some facilities do not have any recycling infrastructure in place. For the most part this is due to the difficulty in separating and processing medical waste<ref name=":0">https://www.sciencedirect.com/science/article/pii/S2542504821000348</ref>. More and more hospitals are implementing recycling programs for certain types of plastic waste, such as plastic bottles and packaging materials. In most cases these programs require the staff to take some training to ensure proper sorting and disposal of recyclable plastic. Luckily, with more research being done on the topic, there are guidelines for enhancing the recycling potential for plastic waste in hospitals<ref>https://www.hprc.org/design-guidance/ </ref>. Hospitals can now implement the positive design practices and the negative design practices in order to recycle more plastic.
 
Recycling of plastic starts with identifying the materials for recycling, and sorting the materials. Manual sorting is possible but very labor intensive. Therefore, automated sorting techniques are preferred. Near infra-red (NIR) is an identification technique that provides high speed. Separation is then done using one of many technique, to name a few: density separation, froth flotation and electrostatic sorting. Now that the plastic is separated, the recycling process can start. Depending on the type of plastic, the recycling process will following one of four paths: primary, secondary, tertiary or quaternary recycling<ref name=":0" />.
 
Primary recycling refers to the reuse of plastics scraps into product similar to the original material, such as a bottle being reused as a bottle, When possibly, this type of recycling is preferred as the waste is easily integrated back into the production cycle. However, this process is not possible for contaminated plastics<ref name=":0" />.
 
Secondary recycling uses mechanical systems to collect, separate and sort the material. After that, the system washes contaminants on the plastics and grind it down. Some variants of secondary recycling are screw extrusion<ref>https://www.sciencedirect.com/topics/materials-science/single-screw-extrusion</ref> or blow molding<ref>https://www.sciencedirect.com/topics/engineering/blow-molding </ref>. This process is not effective with highly contaminated waste, so it cannot be always used<ref name=":0" />.
 
Tertiary recycling or chemical recycling converts plastic materials into smaller molecules, usually liquids or gases. This type of recycling uses a chemical process to recover the petrochemical components in plastics. Innovative solutions are being developed for this process, and example of this is pyrolysis<ref>https://www.ars.usda.gov/northeast-area/wyndmoor-pa/eastern-regional-research-center/docs/biomass-pyrolysis-research-1/what-is-pyrolysis/#:~:text=Pyrolysis%20is%20the%20heating%20of,strong%20bio%2Dpolymers%20mentioned%20above.</ref>. After tertiary recycling the plastic waste is converted to usable materials, therefore reducing overall amount of waste that needs to be disposed of<ref name=":0" />.
 
Quaternary is synonymous to incineration, the technique we mentioned earlier. This technique incinerates the plastic waste and recovers energy. However, the combustion usually releases harmful gases. For medical waste that cannot be recycled otherwise, this is a good option<ref name=":0" />.
 
An important note is that there are some types of medical waste that cannot me recycled, examples are sharp and biological materials. These types of medical waste must be disposed of using specialized methods, we will elaborate on these specialized methods later.
 
'''User Study'''
 
Nurses<span> </span>:
 
Medical waste produced in hospitals is mainly disposed by the nurses . This group op users is trained to separate and throw waste in the corresponding bin. Nevertheless , there are many problems that faces the nurses which makes medical waste management inefficient. In a study published in the "Journal of nursing management" , nurses were interviewed and the following problems are expressed: Firstly, medical and nursing students that temporarily work in a hospital lack the knowledge about recycling management process. Secondly, emergency cases which require immediate intervention leads to mistakes in throwing the waste in the correct disposal unit. Thirdly, lack of personnel leads to a heavy workload which again causes inevitable human mistakes. The biggest obstacle facing recycling was a lack of information about recyclable and contamination of materials .
 
The nurses expressed the need to frequent training for new and old medical staff. Others has emphasized that it would be beneficial to have a single person responsible for medical waste and recycling control and to design the service management accordingly. <ref>https://onlinelibrary.wiley.com/doi/10.1111/jonm.13891</ref>
 
 
Current workflow (USA)<span> </span>:
 
In the USA, the current workflow of medical staff regarding plastic waste management varies depending on the facility and region. However, there are generally accepted guidelines and best practices that medical staff follow to manage plastic waste.
 
Firstly, medical staff are trained to segregate waste at the point of generation, which means that they sort the waste into different categories such as infectious, hazardous, pharmaceutical, or general waste. This helps to ensure that each type of waste is managed appropriately and safely. Once segregated, the plastic waste is typically collected in specialized containers that are labeled and color-coded to indicate the type of waste they contain. For example, infectious waste may be collected in red containers, while hazardous waste may be collected in yellow containers. Medical staff are also encouraged to minimize the amount of plastic waste they generate by using reusable or sustainable alternatives whenever possible. This includes using cloth gowns and towels instead of disposable ones, using reusable containers for sharps disposal, and minimizing the use of single-use plastics in the medical setting. Overall, the workflow of medical staff regarding plastic waste management in the USA involves careful segregation, labeling, and disposal of plastic waste, as well as a focus on minimizing the amount of waste generated.
<br /><references />5. https://www.sciencedirect.com/science/article/pii/B9780444638571000012

Latest revision as of 20:49, 10 April 2023

Group members

Name Student id Major
Luta Iulia Andreea 1671685 BCS
Sonia Roberta Maxim 1675656 BCS
Marie Spreen 1909983
Fenna Schipper 1625624 BPT
Hakim Agni 1430149 BCS
Lazgin Mamo 1502506
Dhruv Manohar 1568868 BCS

Introduction


Problem statement

Plastics have had a big impact on the medical industry. Their main advantage is the ease of sterilization compared to traditional materials used in healthcare such as ceramics, glass and metal. The latter materials needed time-consuming sterilization processes, steaming or autoclaving, whereas for plastics, there is a new technology used: gamma sterilization. With the use of plastics, procedures are easier and safer and the costs have been reduced a lot[1]. But this revolutionary change of plastics in health care also results in a lot of plastic waste. In 2020, globally over 32 billion pounds of healthcare plastics were produced, and this is expected to grow to 48 billion pounds by 2025. Most of this plastic is being disposed of in landfills or by incineration even though much of this material is uncontaminated and recyclable[2]. During the Corona crisis, the waste became even more because the large amount of single-use plastics that were needed as personal protective equipment. "There has been a dramatic demand for personal protective equipment (PPE). PPE which includes masks, safety goggles, face shields, hair covers etc. are all made of plastics like polyethylene terephthalate (PET)" [3]. All these plastics have a great impact on the environment, especially because most of these plastics are assumed to be infectious and cannot be discarded with the common municipal waste. Moreover, lack of sufficient landfills available have persuaded mankind to think of sustainable recyclable options. Most of the medical plastics have the potential to be recycled back into the petrochemical industry as a feedstock for the production of new plastics or refined fuels[1]. Recycling these plastics is a solution to solve the crisis of plastic pollution, but recycling medical plastic has difficulties involved in sorting and cleaning.

To use plastics for biomedical application, it is important that plastics are selected with appropriate material, chemical or thermal properties, sterilization potential and durability because not all plastics can be recycled. If the plastics are not recycled in the correct way they can cause serious health issues and long-term pollution[3]. Even though recycling medical plastic can make a serious difference, still very little is known and done. There is an association, HPRC (Healthcare Plastics Recycling Council), that tries to solve this problem. However, still not a lot has improved.


In the US, the economy lost more than US$7.2 billion from landfilled plastic waste in 2021 according to Department of Energy (DOE) estimates. "We posit that a substantial amount of landfilled plastic waste could be recovered through advanced sorting, existing, and emerging recycling processes", asserts Anelia Milbrandt, a senior research analyst at the DOE’s National Renewable Energy Laboratory.[4]

Objectives

To help the recycling process of medical plastic, we will try to come up with a robot which makes helps with dividing the different plastics based on their properties so it will be easier to recycle them. In order to do this literary research will be done and a concept will be made.

Why?

Medical staff already have a heavy workload and many responsibilities to deal with during their time at hospitals and clinics. Except from the shortage of medical staff due to the growing population in European countries, the available medical staff already spend much time on other tasks than taking care of patients. For instance, a study published in SAGE journals reports that doctors for instance spend 8.7 hours per week (16.6 % of working hours) on administration less than physicians who spend 20.3 % of working hours on administrative tasks[5]. Training medical staff to separate medical waste based on their chemical properties could be a cheaper and easier solution , however it would also put more workload on them and affect the service quality they provide for their patients.

In addition , Stericycle’s Healthcare Workplace Safety Trend Report found that more than 90% of healthcare professionals surveyed believe effective medical waste management is key to providing the best patient care possible. On the other hand, those surveyed also reported that improper medical waste management contributes to fatigue and burnout (68%) and can negatively impact patient health and safety (72%). Nurses can save time and energy when they can dispose of medical waste through a streamlined process."[6]


State of the art

In this section we will investigate potential attempts that have already been implemented in order to tackle different aspects of this problem and existent technologies that can help towards creating a final design.


Machines developed that can separate 12 different types of plastic[7]

Researchers from the Department of Biological and Chemical Engineering at Aarhus University have created a new camera technology that can differentiate among 12 types of plastic From these types, PVC, PP, PS, PE, PC, PET, PA12, ABS are frequently used in the healthcare system. For example, Polycarbonate (PC) is usually found in syringes, tubes and stents. The camera technology separates the different types of plastic based on their pure chemical composition. It uses a hyperspectral camera and machine learning algorithms to analyze the type of plastic directly on the conveyor belt.

In comparison, the current technology that usually uses near-infrared technology or density tests, can separate a much smaller variety of plastics and it is not as efficient.

Plastic classification via in-line hyperspectral camera analysis and unsupervised machine learning[8]

Hyperspectral imaging with wavelengths from 955 to 1700 nm on thirteen different plastics analyzed by PCA has shown that the spectral range is sufficient to differentiate plastics. Unsupervised machine learning has proven to cluster the plastic types and the resulting loading matrix correctly classified unknown plastic samples.

Healthcare Plastics Recycling Council (HPRC)[9]

The council showcases multiple case studies run in hospitals regarding plastic recycling. Even though multiple hospitals are planning and developing a recycling program, none of them had promising enough results to make a breakthrough.

  • Chicago Regional Recycling Project: HPRC and Plastics Industry Association (PLASTISCS) are currently running a recycling program in the Chicago area. Participating hospitals are Advocate Illinois Masonic Medical Center, and NorthShore University Health System’s Evanston, Skokie, Glenbrook, and Highland Park Hospitals. The project includes various companies providing logistics and recycling support, sustainability management software service, financial support and specialized bags for collection and transportation of the plastic materials.
  • Kaiser Permanente and Cleveland Clinic: the approach focuses on external waste recycling companies that will deal with sorting the mixed plastic waste. The programs are not yet running.
  • Mayo Clinic: Mayo Clinic’s Healthcare Plastics Recycling Program began in 2013 and from 2016-2017 it saw a 78% increase in recycling the PP, PS and other types of plastic and a 9% increase in recycling PET AND HDPE plastics. The project involves the addition of a baler, a grinder and willing external plastic buyers.

TRASHBOT[10]

Physical implementation of a autonomous sorting waste technology. Developed by cleanrobotics, the technology uses AI and computer vision to detect the recyclables and then applies machine learning algorithms to sort them and divert them into specific bins.

ECOSTERYL[11]

Ecosteryl is a machine produced by the company AMB based in Belgium that offers a solution for medical waste treatment and recycling. The waste is shredded and decontaminated in a secured machine. The machine does not need any water or steam.

ECODAS[12]

ECODAS is a company based in France that also deals with medical waste. This includes medical waste from hospitals, clinics, other healthcare institutions, seaports and airports. The ECODAS machine is an automated system that sterilizes regulated medical waste and thereby reducing around 80% of the waste volume. The recycling and sterilization include shredding and steaming of waste.

Users

Primary Users: Medical Staff

In the USA, the current workflow of medical staff regarding plastic waste management varies depending on the facility and region. However, there are generally accepted guidelines and best practices that medical staff follow to manage plastic waste.

Firstly, medical staff are trained to segregate waste at the point of generation, which means that they sort the waste into different categories such as infectious, hazardous, pharmaceutical, or general waste. This helps to ensure that each type of waste is managed appropriately and safely. Once segregated, the plastic waste is typically collected in specialized containers that are labeled and color-coded to indicate the type of waste they contain. For example, infectious waste may be collected in red containers, while hazardous waste may be collected in yellow containers. Medical staff are also encouraged to minimize the amount of plastic waste they generate by using reusable or sustainable alternatives whenever possible. This includes using cloth gowns and towels instead of disposable ones, using reusable containers for sharps disposal, and minimizing the use of single-use plastics in the medical setting. Overall, the workflow of medical staff regarding plastic waste management in the USA involves careful segregation, labeling, and disposal of plastic waste, as well as a focus on minimizing the amount of waste generated.

There are many problems that faces the nurses which makes medical waste management inefficient. In a study published in the "Journal of nursing management" , nurses were interviewed and the following problems are expressed: Firstly, medical and nursing students that temporarily work in a hospital lack the knowledge about recycling management process. Secondly, emergency cases which require immediate intervention leads to mistakes in throwing the waste in the correct disposal unit. Thirdly, lack of personnel leads to a heavy workload which again causes inevitable human mistakes. The biggest obstacle facing recycling was a lack of information about recyclable and contamination of materials.[13]

For this group of users , it is essential that the segregation of medical plastic waste is done appropriately and automatically. Segregation robots can help medical staff quickly and efficiently sort medical waste, saving time and increasing productivity. Furthermore , Medical waste must be properly segregated and disposed of according to local and national regulations. Segregation robots can help ensure that medical staff comply with these regulations, reducing the risk of fines and other penalties.

Secondary Users: Hospital Management

Now in hospitals, waste is generally separated into color-coded bins or bags. This system however is far from flawless. Because the color selected for each waste type varies between different regions. This lack of standardizations results in errors in the waste separation and makes the system inefficient.

In hospitals the separation of infectious and non-infectious waste is an important process because faults during this process can result in higher costs and danger for the people working with the waste. Studies conclude that 70 to 80 percent of the infectious waste stream leaving hospitals include non-infectious wastes that have been mixed into the infectious waste stream due to poor separation practices. When non-infectious waste ends up being mixed with the infectious waste the costs will be significantly higher because it all has to be processed as infectious waste which is a more expensive process[14]. The poor separation system can also become dangerous when a person comes in contact with infectious waste.

To prevent a mix up of the non-infectious and infectious waste it will be best to separate the two directly when it is deposited into the bins. This however comes with another problem, a lack of clear sorting protocols which makes it hard for the staff to correctly separate the waste.

When sorting plastics there are some additional points to take into consideration in the separation process. There should be a separation between the plastics that can be recycled and the ones that cannot to recycle as much of the plastic as possible. This should be done very carefully because when the waste is not handled correctly it can lead to serious environmental problem. The plastics which can be recycled should again be sorted into their ease of recyclability. When the plastics are infectious, they first have to be sterilized before they can be send with the other waste[3].

So overall for the good waste separation system in hospitals it is best if the waste is separated at the source and for the plastics it is important that is correctly separated based on the recyclability of the plastic to recycle as much of the plastic as possible.

Tertiary Users: Waste Handlers

In the process of plastic-recycling, waste handlers are working on reprocessing plastic scraps and waste into useful products. This often requires greater processing than the recycling of other materials, due to the unique properties of plastics and the various steps that need to be considered. Due to the high molecular weight of large polymer chains, dissolving plastics cannot easily be achieved through heating. Therefore the mixing of different plastics tends to produce phase-separated material, which is structurally weak and only useful in a very limited range of applications. In addition the widespread use of dyes, fillers and other additives leads to many more impurities that have to be accounted for. Oftentimes the polymers are damaged in the process of removing these impurities. Whenever it is possible to produce a single-material and clean stream of plastic, the plastic recyclables are usually shredded and worked into pellets, which are then used to produce new products. Oftentimes products which are themselves made from recycled plastic are no longer recyclable, due to the structural toll the recycling process takes on the material.[15]

The difficulty of the plastic-recycling process is reflected in the amount of plastics recycled. According to a survey in the U.S. in 2021 an estimated 40.1 to 51 million tons of plastic waste were generated, of which only between five and six percent of total plastic were recycled. The majority of U.S. plastic waste is land filled.[16]

The demand for recycled plastics and therefore the market volatility for waste handlers is affected by the price of virgin commodity plastics. Specifically the mixed material healthcare plastic waste streams in addition to the low mass per unit area of plastics relative to other materials, leads to a high logistic cost associated with the recycling process. The European Recycling Industries Confederation (EuRIC) wrote a position paper on the capital investment required to use heavy chemical recycling plants that process mixed waste streams (i.e. through processes such as pyrolysis). It concluded that this would be economically viable at a crude oil price of $65-75/barrel. Over the last five years, oil prices have not been above this range. On the other hand the vast amount of recyclable plastics that are currently ending up in landfill in addition to the momentum behind advanced recycling technologies could work to minimize the cost of the recycling process and ensure market volatility.

While the recycling of plastics has to of course be economically viable, it should also be environmentally viable. The Dutch firm CE Delft analyzed the greenhouse gas reduction and concluded that purification and depolymerization technologies were comparable to mechanical recycling whereas thermal conversion technologies (e.g. pyrolysis), while generating greater greenhouse gas emissions than mechanical recycling, still fell below what would be expected from incineration.[17]

Especially medical waste bears the additional risk of being infectious. Using various sterilization processes we could get rid of that risk, but add to the logistic and economical barriers for waste handlers.[3]

There are essentially four common plastic recycling routes (as can be seen in the figure to the right):

  1. Primary recycling is the process of reusing single type plastics which are clean or uncontaminated or converting plastic scraps into products with similar characteristics of the original material. Oftentimes waste plastics can be mixed with virgin material to ensure the required product quality. This is considered a closed loop process, as can be seen in the figure.
  2. Secondary recycling is the recovery of plastic wastes by mechanical means. It involves washing the plastic to remove contaminants and grinding the material. Repeatedly processing plastic in this way leads to slowly building contamination and thermal degradation over time.
  3. Tertiary recycling is the (often chemical) process of converting the material into smaller molecules (liquids or gasses) to generate chemicals and fuels. It involves chemical processes such as purification, wherein polymers are chemically separated from unwanted additives, decomposition/depolymerization, which breaks the molecular bonds of plastics into monomers and intermediates by biological, chemical, or thermal means, and thermal conversion, which brings plastics back to their most basic petrochemical building blocks by breaking their molecular bonds. The most popular methods of thermal conversion is pyrolysis, where medium temperatures are applied in the absence of oxygen or air to convert plastic waste into liquid and gaseous products and a char byproduct. This process is very useful since it allows for the recycling of material blends.
  4. Quaternary recycling is the process of recovering energy from waste plastic by incineration. This method is applied whenever wastes are highly contaminated and cannot be recycled by normal means. The process results in waste residues and ultimately pollution as well as harmful gasses that are released during combustion. It reduces the volume of waste to 1% and effectively decomposes toxic or contagious waste.[3]


Design concept

To help with the process of recycling plastics in hospitals, we will design a bin robot. The purpose of this robot is to separate the most common types of plastics in hospitals by itself, so that the medical staff do not have to have extra training and knowledge to separate the plastics correctly.

MoSCoW List

In order to define our design requirements, we created a list which prioritizes these using the MoSCoW method.

Must Haves Should Haves Could Haves Won't Haves
Opening that people throw the trash into Sensor for fullness detection (interactive) Display for more detailed fullness indication Mechanism to recycle plastics
Sensor Mechanism that can sense characteristics of plastics Simple fullness indication System for relaying fullness information to relevant staff Connection to underground storage
Algorithm or Software that can use sensor data to categorize plastics Way of identifying emptied plastic types for easy storage (e.g: color coded bags) Odor remover to remove unpleasant odors Mechanism for detecting contagious waste
Different compartments to store the respective types of plastic Compartment for general waste Wheels to move through the hospital Mechanism for sterilizing contagious waste
Mechanism that puts incoming trash into appropriate compartment Easy access to controller and mechanical parts for maintenance Mechanism that compresses the trash
Must follow the hospital regulations [18] Updatable over the air
Proper isolation of compartments, trash may not mix under any circumstances Mechanism that makes bin inaccessible when full
Once trash is inside it stays inside unless a professional empties the bins
Accessible at all times, unless it is full, or someone is unloading the trash
Accessible, lockable additional opening that full bins can be emptied through
Appropriate dimensions, fits through doors and inside corridors[19]
Be easy to use:
  • Requires no training
  • Requires minimal decisions
Be safe to use:
  • No sharp edges
  • No contact with mechanical parts
Flowchart illustrating the streamlined process of medical waste disposal, classification, and compression with the use of our Bin design (generated in Dia)

Use Cases

As we continue to design our medical plastics waste sorting bot, it is important to consider all of the different functionalities it will need to have in order to effectively sort the waste. One key aspect of this is the ability for the design to appropriately perform in all potential circumstances. To achieve this, we have identified several specific use cases and the corresponding functionalities of our bin. These use cases represent one step in the process of creating our final project, as we work towards a fully functioning system for medical plastics waste recycling.

The figure above depicts the process through which each piece of waste can be disposed of appropriately.

The following use cases describe this and additional processes that the bin needs to handle:

  1. Disposing waste: The bin allows the access of the piece into the inside of it. The waste is scanned by the sensor mechanism, which uses its algorithm to identify the type of plastic it contains. The piece of waste is then placed in the respective compartment for the specific type of plastic, which is clearly labeled on the outside of the bin.
  2. Classifying waste: Upon receiving waste, it is scanned and classified in the correct category. The sensor mechanism identifies the type of plastic, and the algorithm categorizes it accordingly.
  3. Sorting waste: Upon classifying the waste correctly, the bin uses the sorting mechanism to sort the waste into its respective compartment. The sorting mechanism ensures that each type of plastic is stored in its designated compartment, preventing contamination and making it easier for recycling companies to process the materials.
  4. Signaling fullness: When the bin gets full, a sensor will activate. The bin closes temporarily until an employee empties it. A signal is sent to the management team to let them know the bin is full. This feature ensures that the bin is emptied before it overflows, preventing litter and potential health hazards.
  5. Disposing non-plastic: The bin allows the access of the piece into the inside of it. The waste is scanned, and it is noticed that the piece does not contain plastic. The piece of waste is then placed in the compartment for unknown substances, which is separate from the compartments for plastic.
  6. Compressing the waste: The bin can use a combination of weight and IR sensors to determine if the waste is compressible or not, and if it is, it can compress the waste to fit more plastics in it. This feature maximizes the bin's capacity and reduces the frequency of emptying.
  7. Emptying the bin: Upon arriving at the bin the employee will empty each full compartment individually, taking the plastic waste to the appropriate recycling unit for further processing. After emptying, the bin will resume normal operation.
  8. Sterilizing the waste: This feature is not included in the design.
3D Model of the Bin Design (frontal view) (generated in Blender)


After establishing the MoSCoW list of requirements and considering several use cases for our medical plastics-waste sorting bot, we focused on developing a detailed design that would meet each of these requirements. To aid in this process, we created a 3D model of the exterior of the trash bot, which allowed us to visualize the physical layout and design of the bot before moving forward with considering its specific components.

3D Model of the Bin Design (generated in Blender)
3D Model of the Bin Design (inside) (generated in Blender)

The figures to the right show our design, which features an opening, through which users can dispose of waste easily. The blue screen next to the opening functions as a display for important information regarding the status of the bot, such as when a compartment is full and requires emptying. The bot's seven separate compartments are clearly visible in the image, each with its accessible, lockable opening. The compartments can be emptied individually, allowing for efficient disposal and recycling of plastic waste.

Furthermore, our 3D model depicts a cable extending from the trash bot into the wall, indicating that the bot will be powered via a standard electrical outlet. This will allow for consistent and reliable operation of the trash bot, ensuring that it is always accessible to hospital staff and functioning properly to sort medical plastic waste.

We chose to specifically design our automated waste sorting system in the form of a bin, as this approach would allow hospital staff to easily and safely dispose of waste without requiring extensive training or knowledge of plastic sorting. Additionally, the automation process ensures that waste is sorted accurately and efficiently, minimizing the environmental impact of medical waste.

In the following section, we will delve into the specific functionalities and components of our medical plastics waste sorting bot design in greater detail.


Argumentation for our Design Choices

Separating between Non-infectious vs infectious Waste

For the bin, the choice was made to only focus on non-infectious plastics for the bin. This will result in the product only sorting the non-infectious plastics. It is important to make a decision on whether to collect non-infectious or infectious plastics. When the two are mixed, all the plastics need to be treated like infectious waste. The treatment of infectious waste is a lot more expensive than the treatment of non-infectious waste, so a mixture of the two will only result in more, unnecessary costs. There are some reasons why the choice was made to sort the non-infectious plastics with this bin instead of the infectious plastics. First, about 85% of medical waste is general, non-infectious waste[20]. This means that when the bin focuses on the non-infectious waste it will have a lot more impact than when it focuses on the infectious waste because there will be a lot more waste to sort. Furthermore, non-infectious plastics can immediately be recycled in the Recycling stream of general waste. When the plastics are infectious, the plastics first have to be sterilized. This will not be possible with just this bin, which results in an even harder process because an extra machine should be added.

Separating Between Different Types of Plastics

According to a report by the Healthcare Plastics Recycling Council (HPRC), most healthcare plastic products, that qualify for recycling, fall within five primary applications:

  • Sterilization Wraps
  • Irrigation Bottles
  • Basins, Pitchers, Trays
  • Flexible Primary Packaging
  • Rigid Primary Packaging

These products can be further categorized into seven different plastic types:

  • polypropylene (PP)
  • high density polyethylene (HDPE)
  • polystyrene (PS)
  • multi-materials (HDPE, polyester, polyethylene (PE), polyamides, PP, ionomer)
  • polyethylene terephthalate glycol (PETG)
  • polycarbonate (PC)
  • low density polyethylene (LDPE)[17]

According to our user research the best way of sorting our plastics in a way that maximizes the chances of it being recycled is by creating single material waste streams. If done reliably and with little to no contamination with other materials, this provides waste handlers with high quality material that requires minimal processing before recycling. However there exists a trade-off with regard to the detail of separation between the quality of the waste stream on the one hand and the logistic cost of storage and transportation on the other. If we separate the plastics into all seven categories of healthcare plastics, we create additional costs for both the hospitals and the waste handlers in having to store and transport these plastic types separately. We might consider grouping plastic types together, based on their role in traditional mechanical recycling processing.

The recycling industry commonly differentiates between seven resin types, of which five overlap with our medical plastics categorization: PET, HDPE, LDPE, PP and PS. These plastics are easily recyclable in the current recycling system. [21]

While separating the plastic waste into these resin types is possible, either through manual labor or automation, it can be very inefficient. Especially when mixed with the municipal waste stream, as it is currently often done, a lot of contaminants and lots of inefficiencies are introduced.[22]

By separating the waste at the source and providing uncontaminated, single material streams of these plastics we provide waste handlers with a clean, direct source of high quality, recyclable plastics. While some of these plastics are compatible with traditional mechanical recycling possessing, others (especially multi materials) are only recyclable through more advanced technologies (chemical recycling). These chemical ways of recycling are a lot less established in the U.S. and demand a high upfront investment, but could be highly profitable, considering the vast amounts of plastics that currently go unrecycled.[23]

In addition to our five mechanically recyclable categories we therefore also introduce a sixth multi material category. This category outputs a multi material plastic waste stream that could be processed by a chemical plastic recycler.

At last we also need a seventh category for non-plastic waste. While our bin should serve as a plastics-only solution, human error will most likely introduce non-plastic materials into our system.

This leaves us with seven categories along which we separate the waste:

  1. PET
  2. HDPE
  3. LDPE
  4. PP
  5. PS
  6. Multi Materials
  7. Other

The Sensors

Hyperspectral spectra for the studied plastics. [8]

To sort the different types of plastics correctly, we have chosen to make the plastic classification via in-line hyperspectral camera analysis and unsupervised machine learning. This technology has been developed by Aarhus University together with the Danish Technological Institute and a team of Danish companies; Dansk Affaldsminimering, Makeen Energy and Dansk Retursystem. It is a brand new , innovative technology that differentiates between the types of plastic based on the chemical composition of the waste, thus increasing the accuracy of the sorting process. In order to do this, the system applies unsupervised machine learning on short wave infrared hyperspectral data to build a model for classification of plastics.

Even though the hyperspectral system is a very new and quite expensive technology, we chose it due to its perks over the usual plastic sorting technologies. The most used plastic sorting technique nowadays is Near Infrared Spectroscopy, completed by human sorting. The technology uses near-infrared region of the electromagnetic spectrum to measure the absorbance and scattering of light of specific resins [24]. These resins are solid or liquid synthetic organic polymers that are used as the basis of plastics. To translate, NIR spectroscopy is used to identify the absorption bands of different types of plastic, thus providing the information needed to separate them [24]. When looking at the advantages of Near Infrared Spectroscopy, one can find that it is a very fast technique which is also non-destructive, meaning that the plastic can be recycled after being analyzed. However, the disadvantages of this technology are quite significant as well. Most importantly, it does not provide accurate results when the plastic sample is too small, transparent or filled with carbon black. This is why, many times, NIR sorting is completed by human workers.

This is the main reason why we chose the hyperspectral camera system over the NIR. Both systems come at quite a high cost, however, the hyperspectral camera represents a highly promising alternative, designed to overcome the obstacles of the NIR, thus completely automating and improving the sorting process.

Having all of this in mind, a good way to work with materials, identify them or define their properties is to study how light interacts with them. The hyperspectral camera recognizes materials based on their spectral signatures (how much light is absorbed/ reflected/ transmitted). A spectrum represents the amount of light in different wavelengths. The hyperspectral sensors collect information as a set of 'images'. Each image represents a narrow wavelength range of the electromagnetic spectrum, also known as a spectral band.

The data collected by the hyperspectral sensors is processed using principal component analysis (PCA) and K-means clustering for differentiating the types of plastic.

When it comes to the setup of the hyperspectral system, two rows of four halogen spots (12 V, 20 W) illuminating it at a 45° angle are used. The line-scan hyperspectral camera should be equipped with a spectrograph (QiSpec, QT5022K-I320-SWIR, Qtechnology, DK).

Besides increased accuracy, we have also chosen this model for the future perspective of replacing any kind of manual sorting with an automated one. The system currently is capable of differentiating among 12 types of plastics, however we want to adapt it to our 7 categories of plastics. The bin will also have another bin, besides the 7 plastic ones, for any waste not fitting into the 7 plastic types.

How Benewake CE30 Series 3D LiDAR Sensors work for large and wide waste bins

The bin has also a digital signaling system for the case in which at least one of the bins is full. When the bin is full, the bin will close and a warning signal will be sent to the waste management of the hospital. We want to achieve this by using a distance sensor. After doing some research , we have found two types of distance sensors specifically designed for waste bins[25]:

How Benewake TF Series Distance Sensors work for tall and narrow waste bins
  • The Benewake TF Series Distance Sensors
  • The Benewake CE30 Series 3D LiDAR Sensors
Ram of a Vertical Compactor

The two categories of sensors are specially created for a specific type of bin, as shown in the two figures on the side. Having in mind that our product must have the most efficient space design for the 8 bins, we chose to use the Benewake TF Series Distance Sensors, as the bins will be tall and narrow.

The Compression Mechanism

One of the features that could be added to the design is a trash compressing mechanism. The best solution to achieve this would be by using a vertical compactor. These compactors have a small footprint and are perfect to use in small, crowded spaces, like hospitals. When the compactor chamber is full, its ram is activated by a switch causing the ram to move down on the waste and compress it.

The process of a vertical compactor creates a bale or block that can be used for recycling. After the containers are full, they can be kept on site to decrease the frequency of pickups and therefore, also transportation and disposal costs.[26]

Amount of waste in the bin

Per patient per day between 25 pounds and 34 pounds of waste of produced[27]. Of this waste, about 20% to 25% are plastics[28]. When we take an average of both these number this will mean approximately 6,64 pounds of plastic waste per patient per day. In the bin we designed only collects general, non-infectious waste. Of the 6,64 pounds of plastic waste about 85% of it is general waste, so approximately 5,64 pounds of general plastic waste per patient per day which our bin can collect[20]. When calculating this in kilograms this will be approximately 2,5 kilograms. To estimate how much fits into the bin the number of liters per kilogram was calculated. This calculation is based on the assumption that 1 kilogram of plastic was equals approximately 26,32 liters[29]. The measurements of one compartment in our bin are 30x60x90 cm which means that 162 liter fits into one compartment. Our bin will have 7 compartment which means that 1134 liter of plastic waste will fit in total in our bin. Assuming that indeed one patient produces 2,5 kilograms of plastic waste per day and that 1 kilogram equals 26,32 liters, approximately the plastic waste of 17,2 patients can be collected by one bin per day. This is however assuming that the different types of plastics are equally divided so that all the compartments are full at the same time. This will most likely not be the case so the expectation is that the bin has to be unloaded earlier. On the other side, there will be a compressor in the bin which causes a significate decrease of the volume of the plastic waste which will mean that more waste can be collected by the bin. So keeping these factors in mind, the estimation is that the bin will be able to collect at least the plastic waste of 17,2 patients per day, and probably even more.

Technical Design Decisions

Motors and Actuators

Vertical Movement of TrashBox

The main movement is the vertical positioning of the rectangular box containing the trash, when it is first inserted in the dustbin. For now, lets call this the the 'trash box'. The trash box needs to move vertically (on the y axis); it needs to be really accurate and fast. It also needs to be able to support heavy weight if someone throws some heavy trash in their. Hence, for optimal precision, the best type of motors to use will be Stepper Motors, more accurately a close loop bipolar stepper motor.[30]

Stepper motors are easily available and are used very commonly for CNC applications and 3-d printers, which means there are plenty tutorials on how to control them precisely. A NEMA 23 Stepper Motor seems ideal for the use cases describe above. It is more advisable than a NEMA 17 as it can hold more weight, and can go faster than a NEMA 17 Motor. According to StepperOnline[31], a NEMA 17 can go up-to 3000 RPM, and it has a maximum thrust up-to 27kg when supplied 3A of current. [32]. All of these specification cover the use cases for vertical movement perfectly. To achieve fast movement, it is not advisable to use a nut screw for movement like many 3d printers do, rather it is better to use a belt driven movement system. This[33] is a good tutorial which explains Belt Driven vs Screw Driven CNC movement systems.

The trash box does need to open and close. The motors in there need to be durable, and should have enough holding torque such that if a heavier than expected object is thrown into the trash box, then the doors of the trash box do not open. High Powered small servos such as this one[34] would be ideal for this task. The optimal trash box door would need 2 servos similar to this one, as these servos have high torque and metal gears which ensure that they wont break under high load. Each servo can be placed on one side of the door, serving as a hinge. If 2 servos fail to do the job in the prototype, it will be advisable to make use of 4 servos, where you have 2 for each door.

The doors of the trash box


A should have listed on the Moscow list, is a vertical ram system for trash compression. For this, powerful electric linear actuators are needed. Electric Linear Actuators are a type of actuator that converts energy and signals into a linear motion, in other words a backward or forward motion. This linear motion is then used to tilt, lift, push or pull an object where force is required. This can be done through electrical AC and DC motors, or hydraulics and pneumatics[35].

Many actuators are available, but unfortunately they are really expensive, it might be advisable to make one ourselves. As this is a should have and not a must have, for a prototype, this is one part that can be skipped!

Material Choices

The outside of the actual dustbin should be made using 3003 Aluminum Sheets. The reason this is optimal is because it is easily available, cheap, paintable, and it has superior corrosion resistance and is easy to work with. All the sharp edges can be contoured such that it does not harm anyone, and thus it would fulfill the 'must have' condition of being safe. Furthermore, 3003 Aluminum is strong and durable enough for the current use cases. Its tensile yield strength averages around 27000 Psi and ultimate strength averages around 29000 Psi[36]. Tensile Yield strength basically means the maximum amount of strength that can be applied before the aluminum deforms permanently. However, this is not needed for a prototype, for making a prototype for demonstration purposes, only a skeletal model of the dustbin is required. The most important factor is to make sure it is stable, the movement mechanism can still happen, and that the correct dimensions can be achieved. Thus, it is advisable to use 40mm x 40mm T-Slot Aluminum Profiles to make a prototype. These profiles can be milled to the exact dimensions required for the machine by many different manufacturers in the Netherlands, as these profiles are very commonly used for CNC machines. They are durable, and strong enough for a prototype. The fact that they are used by many hobby CNC makers, makes these profiles very easy to use and build stuff with, and there are a lot of guides on the internet on how to go about working with T-Slot aluminum profiles. These profiles should be used to make an outer skeletal frame of the dustbin, and all the other parts of the dustbin can be secured to these profiles. Since they are used for CNC machines, manufacturers are obliged to mill these profiles with precision.

T-Slot Aluminum profile from Google Images


Dimensions

The length of the machine will be quite long, approximately 320 cm long. We have 7 compartments, and possibly one trash compressor, which would require us to have atleast 30*8 = 240 Cm of length. If we want to leave a gap of 10 centimeters in between all of the bins, and the edges of the machine, then thats 80 more cm. While one can argue that the dustbin is too long, it needs to be placed correctly in the hallway, and all 7 compartments are necessary for the use cases.

For the height of the machine we have a 10 cm raise from the bottom, 5 cm for the wheels, a 90 cm tall bin, a sorting box which is 30 cm tall, and the roof of the machine, which will be around 10 cm long, making the whole machine approximately 1.3 m tall. The width of dustbin needs be around 0.8m wide.

Micro-Controllers

Training a Neural Network with all the different items takes a lot of time, but luckily the training doesn't need to be done in the dustbin itself, classification does though! Luckily, classification is done way faster, but the speed does depend on the processor of the micro-controller. Hence, it's more advisable to use an STM32 based micro-controller over an Arduino. An STM 32 has a 32-bit processor while a regular Arduino UNO has an 8-bit processor. STM32 pays more attention to engineering practice. In fact, there are many simple instruments in the factory, such as temperature controllers, ordinary motor controllers, low-end PLCs, and some civilian toys, game controllers, wired keyboards and mice, and other peripherals and so on are very practical[37]. While it is harder to program using the STMCube IDE (standard STM 32 IDe), it is also something which has a lot of documentation online and many tutorials are available. A good beginner STM 32-bit board is the Nucleo-F446Re, its pin configuration it similar to that of an Arduino Uno, and it can also be programmed using the Arduino IDE, making the board easier to use and understand for the purposes of making a working prototype[38].

Nucleo STM32 from the Nucleo Website


Other Components

The board unfortunately does not come inbuilt with a Wifi module, so a separate ESP8266 Wifi Module is necessary for OTA-updates and for ensuring internet connection with the dustbin. Another component necessary would be motor drivers for the NEMA 23 Stepper Motor; the TB6600 is a popular and easy to use choice, and is compatible with the recommended motor[39].

One of the could haves listed in the in the Moscow list above is an interactive display for the user. A display which indicates how full the dustbin is, would be really helpful for a prototype. There are many displays available on the market, and they also have touch screen, although for ease of use and connectivity for the prototype, it will be better to use an O-Droid unit! Odroid is a company which makes peripherals for a variety of a embedded systems applications! The Odroid VU-5A is a 5-inch display unit, with android built in [40]. Furthermore, this display can be connected to the STM-32 board, and it can give commands as it has serial output. The fact that this has android built in, will be really convenient as it is fairly easy to set up a basic android application with serial communication amongst the STM32 board and the O-droid unit; a fancy GUI displaying the properties of the dustbin is not really necessary for the prototype.

Cost Analysis

Approx
Cost Sheet --> Approx 200 Euros for a prototype

For a prototype, we made a detailed cost analysis with the bare-minimum requirements who's purpose is to just test out sorting and movement. Keep in mind that the costs of items are found online, and can differ from website to website, and are rough approximations of what the cost in right now. The most expensive part is the hyper-spectral camera. It is a relatively new technology compared to everything else and is also the hardest to source. For the dustbin to manufactured and available publicly, this is the biggest cost challenge out of all the items.

Odroid Module from the Website


Discussion

For the bin we tried to have the research on the design and the technical parts of the bin as completed as possible but due to lack of time we did not manage to look into every part of the bin and the process around the bin. So there are still a couple of things we think should be researched more.

Firstly within this project we considered the inclusion of a compression mechanism. This can be a very useful addition to the bin because plastic waste mostly takes much more volume than needed. With the implementation of a compressor as much waste as possible will fit into the bin which results in a longer period between unloading the bin. This will be cost efficient as well as time efficient because the bins have to be unloaded less so less staff is needed to unload the bins and less time needs to be spent on constantly unloading the bins. A rough design of the compressor is already included within our final design, but more research would be needed to realize the implementation.

Secondly one of the main issues we encountered during the development of our product was the challenge of sterilizing contaminated waste. While our product could function effectively in a medical context, it was clear that implementing a sterilization mechanism that would function efficiently and reliably would be difficult. As a result, we decided not to tackle this issue and instead focus on the sorting aspect of waste management. In addition the medical sector presents a highly regulated environment, where specifically plastic products such as packaging or certain tools will often be regulated through centralized bodies such as the Food and Drug Administration (FDA)[41]. A considerable and potentially more effective way of increasing non-infected plastic-waste recycling in american hospitals might therefore lead through regulated and standardized labeling on packaging that helps easily identify and discriminate between different types of plastics. This means that while our product could function well in a medical context and brings with it considerable benefits, the medical sector might not be the most optimal context for our type of product. Since plastic waste is produced in many different contexts and the sorting algorithm and design parameters could easily be altered to fit a different context, our design could be useful in other fields like manufacturing, public places, schools or more.

Furthermore, we think it would be very helpful if a signal can be send to the waste management system so that they can keep track of which bin is how full and when it needs to be unloaded. This will help the waste management system to work more efficiently because they don’t have to spend time to check the bins if they have to be unloaded, instead they exactly know which bin they have to unload. This also ensures that no problem arises with bins not opening up because they are full. To make this implementation as useful as possible more research needs to be done.

Lack of knowledge about the Danish sorting algorithm is also a big issue to tackle. We were not able to figure out how accurate the the classification process was as we were not able to get access to the Neural Network ourselves, and there is not enough information for us to determine the speed of recognition, or to validate the training process of the Neural Network, as it is really new

Another problem we were not able to find a solution for is how to deal with waste thrown into the bin which are multiple objects or objects which are not only made of plastic but also different kinds of materials. For the bin a hyperspectral camera is used. When multiple objects are thrown in at ones, it is likely that the camera will analyze only one of the objects. When this happens and the other object is of a different kind of plastic, the machine will throw both of the objects in the compartment where the object that it detects should be sorted. When the other object which is not detected is of another type of plastic, it will mix up the sorting process. Different types of plastic will be mixed up in that compartment which will cause problems in the recycling process, which may even be harmful. Therefore, it is really important that there comes a solution to this problem. Somewhat the same problem occurs when an object with multiple materials is thrown into the bin. Here the camera will most likely again analyze one of the materials. Which of the materials it detects will decide in which compartment of the bin the object will be thrown. However, when there are two kinds of materials and the object comes into a compartment which only collects a specific type of plastic, it will mix up this sorting process as well. One of the solutions we though of for these problems is a rotation camera, so it detects different angles of the object and in this way also detects if there are multiple materials. This can be a good solution for when there is one object with multiple materials. The machine should however know what to do in this situation, in which compartment it should throw the object. For the problem with multiple objects the rotating camera can also be part of the solution. However, there should still be thought of the best way to make sure that the different objects are both being thrown into the right compartment after being analyzed.

Lastly, we recognized the importance of conducting user research to ensure that our product meets the needs of its users. While we sent an email to 50 American hospitals requesting feedback on our product, we did not receive any useful responses in time to include in our project report. Moving forward, we believe that conducting more research and user analyses will be crucial to ensuring the success of our product.

Conclusion

During the research for the design concept of our product, we gained a lot of different kinds of perspectives on our project. Overall, we believe that a lot can be done to improve the level of recycling plastics in hospitals. Our product can be a good solution. However, we also came to the insight that it will be a hard task to design a bin which is complete to the level that it is efficient enough to make a real change. In hospitals there are a lot of extra factors which have to be taken into consideration when designing a product. Therefore, it would be better to first use the bin in different industries with less complex conditions. This will most likely mean that the bin should be adjusted to the plastic waste in that industry, but we believe this can be easily done by adjusting some elements of the bin. When the product proofs to be effective in a less complicated environment, the bin can be implemented into environments with more complex factors and waste management systems. In either environment, a lot of research still needs to be done to make sure the bin works well and is efficient. For now, it is hard to draw a conclusion on how effective the bin will be because this will depend on a lot of different factors, but because almost none of the plastics in hospitals are being recycled now, the smallest things can already make a difference.

Appendix

Logbook

Week Name Total Breakdown of hours
1 Luta Iulia Andreea Team formation + sending emails
Sonia Roberta Maxim 3 Team formation + sending emails (1h), research ideas for first meeting (2h)
Marie Spreen 1 Team formation + research for ideas
Fenna Schipper 1 Team formation + research ideas for first meeting (1h)
Hakim Agni 1 Team formation + reading course info
Lazgin Mamo 1 Team formation
Dhruv Manohar 1 Team formation
2 Luta Iulia Andreea 6 online meeting (1h), first meeting + tutorial (2h), literature study (3h)
Sonia Roberta Maxim 6 first meeting + tutorial (2h), literature study (3h), online meeting (1h)
Marie Spreen 6 research + meeting + online meeting
Fenna Schipper 6 literature study (3h) and 2 meetings (3h)
Hakim Agni 4 Research (3h) + online meeting (1h)
Lazgin Mamo 6 Literature study (3hours) and meetings (3 hours)
Dhruv Manohar 0 Was sick and had not found a team yet
3 Luta Iulia Andreea 8.5 Research + State of the art, tutorial + 2 meetings (3.5h),
Sonia Roberta Maxim 8.5 Research + State of the art (5h), tutorial + 2 * meetings (3.5h),
Marie Spreen 10 survey research + Meetings + general research + contact hospitals
Fenna Schipper 8.5 research + problem statement + meetings + start MoSCow
Hakim Agni 6 Research (3.5h) + online meeting (1.5h)
Lazgin Mamo 6 meetings(3 hour) + research paper for importance of recycling bin (2 hours)+ writing the objective on wiki (1 hour)
Dhruv Manohar 11 Meetings (3 Hours) + catching up with current work (2 hours) + research into sorting mechanisms (3 hours) + research into other sorting bins (2 hours ) + tutorial (1 hour)
4 Luta Iulia Andreea 9 meetings, tutorial, beginning research on design
Sonia Roberta Maxim 11 structuring wiki page, research on users, meetings
Marie Spreen 12 contact hospitals + meetings + research on tertiary users
Fenna Schipper 11 research + writing secondary users + meeting
Hakim Agni 8 meeting (1 hour) + research current workflow (4 hours) + research medical waste (3 hours)
Lazgin Mamo 8 meetings (3 hour)+ research primary users need and writing the wiki (5 hours)
Dhruv Manohar 12 meetings + design team meetings + design research + research into motors and
5 Luta Iulia Andreea 12 3 meetings, tutorial, designing moscow requirements and usecases, reasearch
Sonia Roberta Maxim 12 Tutorial + 3 * meetings, Research + Helping with moscow list and use cases, updated wiki
Marie Spreen 10 meeting + design-research + meeting + argument write up
Fenna Schipper 10 meetings + research + writing argumentation design choices (infectious vs non-infectious)
Hakim Agni 7 research (2 hours) + finding hospitals (5 hours)
Lazgin Mamo 10 meetings + helping with Moscow list + researching technical needs for the robot
Dhruv Manohar 11 meetings + design research + research into CNC movement systems + research into stepper motors
6 Luta Iulia Andreea 12 2 meetings, tutorial, research on must haves design, writing findings in wiki + argumentation
Sonia Roberta Maxim 12 meetings, tutorial, research on should haves and could haves, writing argumentation on wiki
Marie Spreen 16 2 meetings, tutorial, edit moscow, flowchart, blender model bin, generate blender animation
Fenna Schipper 11 meetings + research design + sketching design of the bin
Hakim Agni 10 finding and contacting hospitals + cleaning up the wiki
Lazgin Mamo 3 due to sickness only joined meetings
Dhruv Manohar 13 meetings + research into micro-controllers + research into o-droid unit + research into materials
7 Luta Iulia Andreea 12 2 meetings, research on how the hyperspectral system works, writing findings in wiki
Sonia Roberta Maxim 12 meetings, economic analysis+ amount of waste, writing on wiki
Marie Spreen 12 meetings + blender animation + prep presentation
Fenna Schipper 15 meetings + research + writing amount of waste in bin
Hakim Agni 12 meetings + cleaning up the wiki + research
Lazgin Mamo 12 meetings + making the slides.
Dhruv Manohar 16 meetings + research into aluminum profiles and prototype techniques + making slides + script for presentation + presentation prep
8 Luta Iulia Andreea 9 presentation, finishing hyperspectral technology part and meetings
Sonia Roberta Maxim 9 presentation, cleaning up references and wiki editing, meetings
Marie Spreen 9 presentation + meetings + wiki editing
Fenna Schipper 11 meetings + writing discussion + conclusion + last checks wiki
Hakim Agni
Lazgin Mamo 8 peer review meeting and attending the presentations session and organizing wiki (problem statement and users)
Dhruv Manohar 14 meetings + putting everything on the wiki + research into cost analysis


  1. 1.0 1.1 Plastics, R. (2018, April 30). Why Are Plastics Essential in the Medical Industry - Raya Plastics. Rayda Plastics. https://www.rayda.co.uk/blog/plastics-in-medicine/
  2. Plastics, R. (2018b, April 30). Why Are Plastics Essential in the Medical Industry - Raya Plastics. Rayda Plastics. https://www.rayda.co.uk/blog/plastics-in-medicine/
  3. 3.0 3.1 3.2 3.3 3.4 Joseph, B., James, J., Kalarikkal, N., & Thomas, S. (2021e). Recycling of medical plastics. Advanced Industrial and Engineering Polymer Research, 4(3), 199–208. https://doi.org/10.1016/j.aiepr.2021.06.003
  4. CNS MEDIA. (2022, May 5). How much? US losing billions every year to landfilled plastic waste, finds Department of Energy. .packaginginsights.com/. https://www.packaginginsights.com/news/how-much-us-losing-billions-every-year-to-landfilled-plastic-waste-finds-department-of-energy.html
  5. Woolhandler, S., & Himmelstein, D. U. (2014). Administrative Work Consumes One-Sixth of U.S. Physicians’ Working Hours and Lowers their Career Satisfaction. International Journal of Health Services, 44(4), 635–642. https://doi.org/10.2190/hs.44.4.a
  6. S. (2022, May 4). Efficient Waste Management Can Help Improve Nurse Well-Being. Stericycle. https://www.stericycle.com/en-us/resource-center/blog/making-nurses-days-easier-with-more-efficient-waste-management
  7. Rushton, K. (2022, February 28). Machines developed that can separate 12 different types of plastic. Innovation News Network. https://www.innovationnewsnetwork.com/machines-developed-separate-12-different-types-plastic/16788/
  8. 8.0 8.1 Henriksen, M. L., Karlsen, C. B., Klarskov, P., & Hinge, M. (2021). Plastic classification via in-line hyperspectral camera analysis and unsupervised machine learning. Vibrational Spectroscopy, 118, 103329. https://doi.org/10.1016/j.vibspec.2021.103329
  9. Hospital Recycling Case Studies | HPRC. (2022, May 5). Healthcare Plastics Recycling Council. https://www.hprc.org/hospital-recycling-case-studies/
  10. TrashBot: The smart recycling bin that sorts at the point of disposal. (2023, February 28). CleanRobotics. https://cleanrobotics.com/trashbot/
  11. ECOSTERYL : Traitement et recyclage des déchets médicaux. (2021, May 26). Ecosteryl. https://www.ecosteryl.com/
  12. ECODAS. (2022, September 6). ECODAS T100 - DASRI, treatment of infectious , hospital and medical waste. DASRI, Treatment of Infectious , Hospital and Medical Waste. https://www.ecodas.com/en/ecodas-t100-en/
  13. Sürme, Y., & Maraş, G. (2022). Recycling, responsible consumption and nursing: A qualitative study of surgical nurses’ recycling and medical waste management. Journal of Nursing Management, 30(8), 4514–4522. https://doi.org/10.1111/jonm.13891
  14. Windfeld, E. S., & Brooks, M. S. (2015). Medical waste management – A review. Journal of Environmental Management, 163, 98–108. https://doi.org/10.1016/j.jenvman.2015.08.013
  15. https://www.pulpandpaper-technology.com/articles/plasticwaste
  16. Statista. (2023, February 6). Plastic waste managed in the U.S. 2018-2021, by method and scenario. https://www.statista.com/statistics/1339439/plastic-waste-management-by-method-us/
  17. 17.0 17.1 https://www.hprc.org/wp-content/uploads/2022/05/Advanced-Recycling-White-Paper-Phase-1.pdf
  18. http://www.hospitalbins.com/pdf/health_technical.pdf
  19. https://healthfacilityguidelines.com/ViewPDF/ViewIndexPDF/iHFG_part_c_space_standards_dimensions
  20. 20.0 20.1 World Health Organization: WHO. (2018, February 8). Health-care waste. https://www.who.int/news-room/fact-sheets/detail/health-care-waste
  21. RTS - Recycle Track Systems. (2022, October 28). The Complete Plastics Recycling Process - Recycle Track Systems. Recycle Track Systems. https://www.rts.com/blog/the-complete-plastics-recycling-process-rts/
  22. C. Rizan, F. Mortimer, R. Stancliffe, M.F. Bhutta; Plastics in healthcare: time for a re-evaluation; J. R. Soc. Med., 113 (2020), pp. 49-53
  23. https://cen.acs.org/environment/recycling/Plastic-problem-chemical-recycling-solution/97/i39
  24. 24.0 24.1 https://www.solidscanner.com/en/basics-and-limitations-of-nirs-nirs-and-how-it-is-used-in-plastic-recycling/
  25. http://en.benewake.com/news/detail/5da03c994d839408076b615b.html
  26. Trash Compactors: Types, Uses, Features and Benefits. (n.d.). https://www.iqsdirectory.com/articles/baler/compactors.html
  27. Waste - Sustainability Roadmap. (n.d.). http://www.sustainabilityroadmap.org/topics/waste.shtml#.ZDG5SHZBxPY
  28. Jain, N., & LaBeaud, D. (2022). How Should US Health Care Lead Global Change in Plastic Waste Disposal? AMA Journal of Ethics, 24(10), E986-993. https://doi.org/10.1001/amajethics.2022.986
  29. Convert waste volume to weight – Your description. (n.d.). BRANZ. https://www.branz.co.nz/sustainable-building/reducing-building-waste/assessing-waste/volume-weight/
  30. https://ieeexplore.ieee.org/abstract/document/4510518
  31. https://www.omc-stepperonline.com/support/what-is-the-maximum-speed-highest-frequency-of-the-stepper-motor
  32. https://novantaims.com/hybrid-stepper-motor/lm23-nema-23-3-0a-1-8-external-linear-stepper-motor/
  33. https://www.youtube.com/watch?v=NTW2Be1pOGw
  34. https://www.conrad.nl/nl/p/motor-micro-servo-high-powered-high-torque-metal-gear-mg92b-adafruit-2307-1516601.html
  35. https://nl.rs-online.com/web/c/mechanical-power-transmission/electric-actuators/electric-linear-actuators/
  36. https://www.thomasnet.com/articles/metals-metal-products/3003-aluminum/
  37. https://www.orientdisplay.com/stm32-vs-arduino/
  38. https://www.st.com/en/evaluation-tools/nucleo-f446re.html
  39. https://www.tinytronics.nl/shop/en/mechanics-and-actuators/motor-controllers-and-drivers/stepper-motor-controllers-and-drivers/hy-div268n-5a-tb6600-stepper-motor-controller-5a-8-42v
  40. https://www.sossolutions.nl/odroid-vu5a-5inch-hdmi-display-inclusief-multi-touch-en-audio
  41. Center for Devices and Radiological Health & Center for Devices and Radiological Health. (2018, March 22). Code of Federal Regulations (CFR). U.S. Food And Drug Administration. https://www.fda.gov/medical-devices/overview-device-regulation/code-federal-regulations-cfr

5. https://www.sciencedirect.com/science/article/pii/B9780444638571000012