PRE2020 4 Group1: Difference between revisions

From Control Systems Technology Group
Jump to navigation Jump to search
No edit summary
No edit summary
Line 60: Line 60:


==== Objectives ====
==== Objectives ====
TODO
The main objective of this project is to develop a device that measures road surface quality by detecting irregularities in the pavement, such as potholes and cracks, that are encountered while driving around. This device can be placed onto a vehicle and will collect data on these irregularities using several different sensors, such as an accelerometer and a GPS module.
 
Through the use of crowdsourcing, the collected data, along with GPS locations, can be used to visualize the locations of potholes, cracks and other damage to the road’s surface, thus creating a mapping of the overall road quality. This data can be used to quickly assess where the damage is the most severe and which roads are in need of repair. As such, road maintenance can be planned more immediately when problem areas are detected, which can contribute to an increase in road safety.
 
# Collect data on potential locations of potholes, cracks and other road surface damage.
# Visualize the locations of detected road damage by overlaying the collected data on a map.
# Enable quick assessment of where the damage is most severe and repair is necessary.
# The device must be cost effective to enable widespread usage.
 


= USE analysis =
= USE analysis =

Revision as of 18:16, 22 April 2021

Project Title t.b.d.

<div#bodyContent sup {

   font-size: smaller;
   vertical-align: baseline;
   position: relative;
   bottom: 0.33em;

}

  1. bodyContent sub {
   font-size: smaller;
   vertical-align: baseline;
   position: relative;
   bottom: -0.25em;;

}>


Team members

Members Student ID Faculty E-mail
Kashan Alidjan 1224924 Electrical Engineering k.m.s.alidjan@student.tue.nl
Sijt Hooghwinkel 1228761 Automotive s.j.c.hooghwinkel@student.tue.nl
Damaris Jongbloed 1241057 Computer Science d.a.jongbloed@student.tue.nl
Emma van Oppen 0963999 Computer Science e.y.v.oppen@student.tue.nl
Laura Verbeek 1428063 Biomedical Engineering l.h.e.verbeek@student.tue.nl

Introduction

TODO

Problem statement and objectives

Problem statement

TODO

Objectives

The main objective of this project is to develop a device that measures road surface quality by detecting irregularities in the pavement, such as potholes and cracks, that are encountered while driving around. This device can be placed onto a vehicle and will collect data on these irregularities using several different sensors, such as an accelerometer and a GPS module.

Through the use of crowdsourcing, the collected data, along with GPS locations, can be used to visualize the locations of potholes, cracks and other damage to the road’s surface, thus creating a mapping of the overall road quality. This data can be used to quickly assess where the damage is the most severe and which roads are in need of repair. As such, road maintenance can be planned more immediately when problem areas are detected, which can contribute to an increase in road safety.

  1. Collect data on potential locations of potholes, cracks and other road surface damage.
  2. Visualize the locations of detected road damage by overlaying the collected data on a map.
  3. Enable quick assessment of where the damage is most severe and repair is necessary.
  4. The device must be cost effective to enable widespread usage.


USE analysis

Users

TODO

Society

TODO

Enterprise

TODO


State of the art / Research

TODO


Plan

Approach

TODO

Milestones

TODO

Deliverables

TODO


Logbook

TODO

Appendix

TODO

References

TODO