Difference between revisions of "PRE2018 1 Group3 1024503"
|Line 26:||Line 26:|
Revision as of 19:07, 14 October 2018
The robot has three classes of users: human store clerks, customers, and the supermarket management. Each of these will have requirements that need to be taken into account when designing a navigation system:
1. Be economically viable: New equipment and maintenance should not cost more than they save and take at most a few years to pay for itself
2. Be safe: Robots should not bump into people or objects
3. Feel safe: People should feel comfortable around the robot(s)
4. Not get in the way: People should have to change their behaviour as little as possible to accommodate for the robot(s)
5. Respect privacy: Keeping profiles of customers is ethically dubious and will upset them
6. Navigate independently: Robots should not get stuck (neither physically nor programmatically)
There are a couple of things that make navigation and behaviour in a supermarket stand out. First of all, the environment itself is completely known; a map of the supermarket should not be hard to acquire. Another interesting factor is that most (if not all) supermarkets have a few security cameras installed on the ceiling. These can be used to keep track of people in some of the areas the robots can't directly see. We can then use image recognition and our knowledge of the environment to place all clearly visible customers on the map. Combined with a model that keeps track of the probability distribution of customers in the areas that cannot be seen, this can be used to improve navigation by staying away from potentially crowded spaces and avoiding collisions in a timely manner.
The behaviour of people in a supermarket is also very different from people on the street: people will often stop in front of a shelf or change direction. It would be possible to base the probabilities of a customer stopping in front of a shelf on their age, outwardly appearance or even their customer card, but this would very much be against requirement 5.
To be able to easily test and compare algorithms and their parameters, a simulation will come in handy.
Work In Progress below this line
State of the Art
The use of robots in a retail environment like stores and supermarkets has been a frequent subject for research. This research can be subdivided into a variety of smaller fields:
Navigation of the robot in a shopping environment is an essential function it should have. Several approaches to navigation were found: Articles here describe the use of models that describe buildings in stores, rooms, a set of places in each room and connectors among these. There is made use of so-called ‘highways’ for pre-determined robot paths and ‘off-roads’ where the robot plans its own path . A different approach is the use of a sensor space as elaborated on in . Other articles describe a modelling approach that predicts the surrounding pedestrian’s actions so that the robot can develop its own path. One promising example is an agent-based modelling approach where surrounding pedestrians are assigned the behaviours interact, watch, curious, ignore, cautious and avoid .
Design of appropriate actuators
The robot should be able to move around various objects, these could be heavy or fragile. Article  describes the use of a force control parameter for robot grippers, so that fragile objects will not be damage by actuators. Article  emphasises the challenge of designing safe actuators for human-centred robotics. The articles states that by reducing the effective impedance while maintain high frequency torque capability in actuators, safety and performance requirements can be achieved.
Design of appropriate sensors
Various sensors are needed, especially for localisation and navigation purposes but also for object recognition. According to  the advances in computer vision have led to an increase in the use of cameras as sensors. They are often combined with other sensors such as odometry or lasers. Omnidirectional sensors stand out in the richness of information they provide. These sensors, together with robust models of the environment are important for designing an autonomous mobile robot.
Object recognition (in a shop context)
(Camera) sensors could be used for object recognition, which is an essential task for this robot application. The robot should be able to distinguish a large variety of shopping goods and should be able to detect if the product is misaligned or missing in the shelves. Article  describes a vision system where the user can specify an object the robot has to find and bring. When the recognition result is shown, the user can provide additional information, such as point out mistakes. Article  proposes a novel method for obtaining product count directly from an image using a monocular camera. Article  describes a patrolling robot that detects misaligned and out of stock products and provides the store associates with alert messages.
Robots working alongside humans could pose safety issues as well as open up question on how robots should interact (verbally) with humans. Another problem is that the use of robots could make humans redundant in this field of the job market. Article  says that retail automation is essential in competitiveness, but could lead to the minimum-wage employees being redundant as the robots are far cheaper. Robot store clerks are likely to be a disruptive force for the retail industry, this article states. Article  emphasises more on self-aware robots that become a part of society (including the retail sector) where brands are used as self-expression. Article  describes a means for robots to detect human action to make the cooperation between humans and robots in the workspace more attractive.
Human-robot interactions during shopping activities
A robot store clerk should also be able to interact with humans. Humans might want information about a product or want to know where it is located. Article  proposes a robotic shopping companion to help customers in their shopping activities. Furthermore, the robot collects the emotional state of people through social interactions and then use that to influence people’s buying decisions. Article  goes further with investigating ways in which robots can persuade people. This could be applied to the robot store clerk in persuading people to buy a certain product. Article  describes ways in which verbal output of a robot can be made more human-like by introducing context-aware conversational fillers.
A combination of above fields, applied to a designed robot
These articles describe a fully working system of a robot working in a retail environment. Especially article  is a great example, where a system is built that automates data collection for surveying and monitoring the shelves. The robot here can monitor shelves autonomously or through tele-operation. It can automatically detect out of stock situations. According to this article it will improve customer satisfaction, as shelve products are filled more frequently. The deployment also would not require modifying the existing store infrastructure and has a short return-on-investment period.
 Guizzo, E. Ackerman. E. (2015). iRobot Brings Visual Mapping and Navigation to the Roomba 980. IEEE Spectrum: Technology, Engineering, and Science News. Retrieved from https://spectrum.ieee.org/automaton/robotics/home-robots/irobot-brings-visual-mapping-and-navigation-to-the-roomba-980
 Heinzmann, J., & Zelinsky, A. (2000). Building Human-Friendly Robot Systems. SpringerLink, 305–312. doi: 10.1007/978-1-4471-0765-1_37
 Wisskirchen, G., Biacabe, B T. et al. Artificial Intelligence and Robotics and Their Impact on the Workplace, April 2017, IBA Global Employment Institute
 Mantha, B. R. K., Menassa, C. C., & Kamat, V. R. (2018). Robotic data collection and simulation for evaluation of building retrofit performance. Autom. Constr., 92, 88–102. doi: 10.1016/j.autcon.2018.03.026
 Rajithkumar, B. K., Deepak, G. M., Uma, B. V., Hadimani, B. N., Darshan, A. R., & Kamble, C. R. (2018). Design and Development of Weight Sensors Based Smart Shopping Cart and Rack System for Shopping Malls. Mater. Today:. Proc., 5(4, Part 3), 10814–10820. doi: 10.1016/j.matpr.2017.12.367
Store clerk robot implementation (technical)
 Tomizawa, T., & Ohya, A. (2006, October). Remote shopping robot system,-development of a hand mechanism for grasping fresh foods in a supermarket. In Intelligent Robots and Systems, 2006 IEEE/RSJ International Conference on (pp. 4953-4958). IEEE. DOI: 10.1177/1729881417703569
 Cheng, C. H., Chen, C. Y., Liang, J. J., Tsai, T. N., Liu, C. Y., & Li, T. H. S. (2017, September). Design and implementation of prototype service robot for shopping in a supermarket. In Advanced Robotics and Intelligent Systems (ARIS), 2017 International Conference on (pp. 46-51). IEEE. DOI: 10.1109/ARIS.2017.8297181
 Lin, T., Baron, M., Hallier, B., Lin, T., Baron, M., Hallier, B., ...Dugan, J. (2016). Design of a low-cost, open-source, humanoid robot companion for large retail spaces. 2016 IEEE Systems and Information Engineering Design Symposium (SIEDS), 66–71. doi: 10.1109/SIEDS.2016.7489329
 Kamei, K., Ikeda, T., Kidokoro, H., Kamei, K., Ikeda, T., Kidokoro, H., ...Hagita, N. (2011). Effectiveness of Cooperative Customer Navigation from Robots around a Retail Shop. 2011 IEEE Third International Conference on Privacy, Security, Risk and Trust and 2011 IEEE Third International Conference on Social Computing, 235–241. doi: 10.1109/PASSAT/SocialCom.2011.173
Most Important Design Problems
From the literature study, we can conclude that there are four design problems that are the most important. Since our time is limited, we will only be able to focus on one of these.
First of all, there is shelf restocking according to the first in first out (FIFO) principle. Humans are far better at grabbing a variety of objects, while robots can do this but very slow and inefficiently. Also, the task of placing the newest products in the back of shelves as by FIFO is physically hard for a robot to do. Robots like AMIGO already have a lot of problems with the basic issue of grabbing arbitrary objects , so contributing to the state of the art will be difficult.
Another important design problem is helping and interacting with customers; providing information about product location or stock availability. Difficulties lie in human-robot interaction, the design of an appropriate GUI and means of communication. This is an interesting problem, but there is not much that sets this problem apart from other situations outside of supermarkets.
There is also the possible task of shelf analysis to provide shops with retail statistics. This might not be too interesting to research, since robots like Tally (which was previously discussed) already exist that perform this task quite efficiently.
Last of all there is the problem of robot navigation in a crowded supermarket environment. There are already options available for robot navigation in crowded environments. However, robot navigation specifically designed for supermarket environments, taking into account possible (robot) store clerk tasks does not exist. Therefore, this research will focus on giving a design solution for this specific problem.
- Gert L. Andersen, Anders C. Christensen, Ole Ravn, Mobile Robot Navigation In Indoor Environments Using Highways And Off-roads, Institute for Automation. bldg. 326, Technical University of Denmark
- Narongdech Keeratipranon, Robot Navigation in Sensor Space, Faculty of Information Technology Queensland University of Technology
- Usher, J. M., McCool, R., Strawderman, L., Carruth, D. W., Bethel, C. L., & May, D. C. (2017). Simulation modeling of pedestrian behavior in the presence of unmanned mobile robots. Simul. Modell. Pract. Theory, 75, 96–112. doi: 10.1016/j.simpat.2017.03.012
- Lauzier, N. (2018, September 04). Robot Gripper Force Control. Retrieved from https://blog.robotiq.com/bid/53319/Robot-Gripper-Force-Control
- Michael Zinn, Bernard Roth, Oussama Khatib J. Kenneth Salisbury. A New Actuation Mastrogiovanni, F., & Casalino, G. (2018). Flexible human-robot cooperation models for assisted shop-floor tasks.Approach for Human Friendly Robot Design. Department of Mechanical Engineering Stanford University
- Payá, L., Gil, A., & Reinoso, O. (2017). A state-of-the-art review on mapping and localization of mobile robots using omnidirectional vision sensors. Journal of Sensors, 2017. DOI: 10.1155/2017/3497650
- Makihara, Y., Takizawa, M., Shirai, Y., Makihara, Y., Takizawa, M., Shirai, Y., ...Shimada, N. (2002). Object recognition supported by user interaction for service robots. Object recognition supported by user interaction for service robots, 3, 561–564vol.3. doi: 10.1109/ICPR.2002.1048001
- Kejriwal, N., Garg, S., Kumar, S., Kejriwal, N., Garg, S., & Kumar, S. (2015). Product counting using images with application to robot-based retail stock assessment. 2015 IEEE International Conference on Technologies for Practical Robot Applications (TePRA), 1–6. doi: 10.1109/TePRA.2015.7219676
- Agnihotram, G., Vepakomma, N., Trivedi, S., Agnihotram, G., Vepakomma, N., Trivedi, S., ...Kumar, R. (2017). Combination of Advanced Robotics and Computer Vision for Shelf Analytics in a Retail Store. 2017 International Conference on Information Technology (ICIT), 119–124. doi: 10.1109/ICIT.2017.13
- Romeo, J. How Will Robot Store Clerks Disrupt Retail? - Robotics Business Review. (2016, July 26). Retrieved from https://www.roboticsbusinessreview.com/supply-chain/how-will-robot-store-clerks-disrupt-retail
- Gonzalez-Jimenez, H. (2018). Taking the fiction out of science fiction: (Self-aware) robots and what they mean for society, retailers and marketers. Futures, 98, 49–56. doi: 10.1016/j.futures.2018.01.004
- Darvish, K., Wanderlingh, F., Bruno, B., Simetti, E., Mastrogiovanni, F., & Casalino, G. (2018). Flexible human–robot cooperation models for assisted shop-floor tasks. Mechatronics, 51, 97–114. doi: 10.1016/j.mechatronics.2018.03.006
- Bertacchini, F., Bilotta, E., & Pantano, P. (2017). Shopping with a robotic companion. Computers in Human Behavior, 77, 382–395. doi: 10.1016/j.chb.2017.02.064
- Lee, S. A., & Liang, Y. (. (2018). Robotic foot-in-the-door: Using sequential-request persuasive strategies in human-robot interaction. Computers in Human Behavior. doi: 10.1016/j.chb.2018.08.026
- Gallé, M., Kynev, E., Monet, N., Gallé, M., Kynev, E., Monet, N., & Legras, C. (2017). Context-aware selection of multi-modal conversational fillers in human-robot dialogues. 2017 26th IEEE International Symposium on Robot and Human Interactive Communication (RO-MAN), 317–322. doi: 10.1109/ROMAN.2017.8172320
- Kumar, S., Sharma, G., Kejriwal, N., Kumar, S., Sharma, G., Kejriwal, N., ...Chauhan, V. K. (2014). Remote retail monitoring and stock assessment using mobile robots. 2014 IEEE International Conference on Technologies for Practical Robot Applications (TePRA), 1–6. doi: 10.1109/TePRA.2014.6869136