Mobile Robot Control 2023 Group 1

From Control Systems Technology Group
Jump to navigation Jump to search

Group members:

Caption
Name student ID
Lars Blommers 1455893
Joris Bongers 1446193
Erick Hoogstrate 1455176


Introduction to mobile robot control

  1. When looking at rviz quite some noise can be seen. Legs of a person will also be detected by the robot.
  2. -
  3. The robot works as in the simulation
  4. https://tuenl-my.sharepoint.com/:v:/g/personal/l_blommers_student_tue_nl/EVWYgKXKIppIi6q_2EhDnHUBWK_LIYP5_UL2cawID7FWEw?e=vuyyFx


Navigation 1

  • Using less nodes.
Updated node placement







Navigation 2


Localization 1

Assignment 1:

A C++ program that reports:

  1. The information in the odometry message is received in the current time step
  2. The difference between the previously received odometry message and the current message

Can be found on the groups gitlab repository in the folder "localisation_1/src/local_1.cpp". The program receives the sensor data from the robot and displays it in the terminal window.

Assignment 2:

In order to asses the accuracy of the odometry data received from the robot, an experiment is performed in the simulation environment. The robot is given the task to drive in a straight line parallel to the x-axis. The expected result would be to only see a change in x-coordinate and a constant value for the y-coordinate and rotation a. When performing this experiment in the simulation environment, the reported values of the odometry data of the robot indeed verify the aforementioned hypothesis.

When enabling the uncertain_odom option, the reported odometry data shows some clear sensor drift compared to the previous situation. Regarding the situation described above, the odometry data now also shows a change in y-coordinate which should not be the case as the robot moves parallel to the x-axis.

All testing performed in the simulation evironment should have the uncertain_odom option enabled as this setting will resemble the way in which the odometry data is received on the real-life robot. This setting needs to be turned on as the simulation environment acts as a "perfect" environment without any wheelslip and/or sensor drift. In real life these two factors do play a role and will cause some errors in the perceived odometry data. This problem can be solved by using a Recursive State-Estimation to get a better estimate of the location and orientation of the robot. This method uses an estimate of the location and orientation of the robot together with odometry and laser data to compute an estimate of the next location and orientation of the robot.

Assignment 3:

Localization 2