MRC/Tutorials: Difference between revisions

From Control Systems Technology Group
Jump to navigation Jump to search
No edit summary
Line 10: Line 10:
#** For now, use a simple editor such as ''gedit'' (the ubuntu version of Notepad). We will install a more advanced editor (IDE - Integrated Development Environment) later.
#** For now, use a simple editor such as ''gedit'' (the ubuntu version of Notepad). We will install a more advanced editor (IDE - Integrated Development Environment) later.
#** Once you have saved your C++ program (e.g. as ''example.cpp''), it can be compiled from a terminal using:<pre>g++ example.cpp -o example</pre>and run with<pre>./example</pre>
#** Once you have saved your C++ program (e.g. as ''example.cpp''), it can be compiled from a terminal using:<pre>g++ example.cpp -o example</pre>and run with<pre>./example</pre>
# [[ MRC/Tutorials/Installing the EMC environment | Installing the EMC environment ]]
# [[ MRC/Tutorials/Installing the MRC environment | Installing the EMC environment ]]
# [[ MRC/Tutorials/Setting up your project | Setting up your project ]]
# [[ MRC/Tutorials/Setting up your project | Setting up your project ]]
# [[ MRC/Tutorials/Setting up an IDE | Setting up an IDE ]]
# [[ MRC/Tutorials/Setting up an IDE | Setting up an IDE ]]

Revision as of 11:28, 27 March 2020

In here, one can find the programs that are going to be used for this course and the proper way of operating them. If one encounters a problem/error, this is typically resolved in the tutorial. If not, then one can also consult the FAQ.

  1. Introduction
  2. Installing Ubuntu
  3. Customizing Ubuntu
  4. Do the following C++ tutorials:
    1. cplusplus.com: up to and including Name visibility
    2. MIT's Introduction to C++: up to and including Classes
    • Remarks:
      • For now, use a simple editor such as gedit (the ubuntu version of Notepad). We will install a more advanced editor (IDE - Integrated Development Environment) later.
      • Once you have saved your C++ program (e.g. as example.cpp), it can be compiled from a terminal using:
        g++ example.cpp -o example
        and run with
        ./example
  5. Installing the EMC environment
  6. Setting up your project
  7. Setting up an IDE
  8. Setting up the PICO simulator
  9. Towards an autonomous robot
  10. Obtaining laser, odometry, and control effort data
  11. Sharing your project through git
  12. Testing on the real robot and recording data
  13. Full Example
  14. Additional OpenCV
  15. Wall following code example
  16. JSON Parsing