Football Table Vision: Difference between revisions
| Line 24: | Line 24: | ||
cd /home/eutaft/foosball/Qtvision/bin <br/> | cd /home/eutaft/foosball/Qtvision/bin <br/> | ||
./Qtvision | ./Qtvision | ||
</code></blockquote> | |||
<p>This will start the vision GUI, which currently looks like this:<p> | |||
==Basic Settings== | |||
<p>This GUI allows the user to set-up several basic settings that allow us to connect to the camera.<p> | |||
===Setting up the LAN connection=== | |||
<p>In order to run the vision software, we must first establish a connection with the camera over ethernet. First we need the fix the adress of wired connection we are using the gnome network manager or <code>ifconfig</code>. | |||
<blockquote><code> | |||
settings: <br/> | |||
ip-adress: 169.254.1.210 (manual/static) <br/> | |||
subnet mask: 255.255.0.0 <br/> | |||
MTU : 9200 | |||
</code></blockquote> | </code></blockquote> | ||
Revision as of 12:18, 10 September 2013
Building the Vision GUI
In order to build the Vision GUI, you need to install qtcreator and the opencv libraries
sudo apt-get install qtcreator
sudo apt-get install libopencv-dev
This tool runs on both x86 and x86_64 systems, however it is compiled against static libraries from Prosillica. These static libraries have to be specified in the Qtvision.pro file for x86_64:
LIBS = -lopencv_core \
...
../src/pvapi/staticlib/x64/4.4/libPvAPI.a
And for x86
../src/pvapi/staticlib/x86/4.4/libPvAPI.a
To build the GUI press ctrl+B. If it fails to build, install missing libraries using apt-get.
The Vision GUI
To run the vision GUI, you need to have root privileges. After building the vision tool in Qt, the executable should reside in the /Qtvision/bin folder. Start this executable using the provided launcher or using terminal (start using ctrl+alt+T):
sudo su
cd /home/eutaft/foosball/Qtvision/bin
./Qtvision
This will start the vision GUI, which currently looks like this:
Basic Settings
This GUI allows the user to set-up several basic settings that allow us to connect to the camera.
Setting up the LAN connection
In order to run the vision software, we must first establish a connection with the camera over ethernet. First we need the fix the adress of wired connection we are using the gnome network manager or ifconfig.
settings:
ip-adress: 169.254.1.210 (manual/static)
subnet mask: 255.255.0.0
MTU : 9200