Football Table RL

Reinforcement Learning Basics

The football table employs on-line value iteration, namely Greedy-GQ[math]\displaystyle{ (\lambda) }[/math] and Approximate-Q[math]\displaystyle{ (\lambda) }[/math]. This page does not explain Reinforcement learning theory, it just touches on the usage and implementation of the provided library (libvfa located on the SVN). Too get a basic understanding of Reinforcement Learning i suggest reading the book by Sutton & Barto . For a slightly more in-depth, hands-on, book on using RL with function approximation, i suggest the book by Lucian Busoniu (TU Delft) et al. , which is freely available as e-book from within the TU/e network. Unfortunately both books very different notations, here we use the notation from the former.

From here on out this section assumes familiarity with reinforcement learning and discusses how the provided libvfa library works and is used. Note, this can be used on any project provided the user provides transition samples correctly.

Value function approximation

For this project it was chosen to use a Gaussian Radial Basis Function Network(RBFs) to approximate the Q-function, a short explanation on the method can be found here in . Currently, this is the only method of function approximation available in the library, however other forms of linear parametric function approximation should be easy to incorporate (this requires to only change the membership function).

RBFs are a linear parametric function approximation, where the Q-function is estimated using:

[math]\displaystyle{ Q = \theta\cdot\phi(s,a)^{T} }[/math]

here [math]\displaystyle{ \phi(s,a)~(1 \times n) }[/math] denotes the so called feature vector, [math]\displaystyle{ \theta~(1 \times n) }[/math] denotes the parameter (or weight) vector and [math]\displaystyle{ n }[/math] denotes the number of nodes. The value of Q hence becomes a scalar, depended on the action and the state. During Reinforcement learning we are trying to estimate the vector [math]\displaystyle{ \theta }[/math].

Formally, feature vector [math]\displaystyle{ \phi(s,a) }[/math], is depended on both the state and the action, creating one long vector that represents Q is its entirety (all combinations of actions and states). However, to make things more simple and comprehensible libvfa is implemented slighty different, yet still correct of course. Instead of creating one long vector, we store [math]\displaystyle{ \theta }[/math] matrix of [math]\displaystyle{ (n_a \times n) }[/math] ([math]\displaystyle{ n_a }[/math] denotes the number of actions). This still holds the same information, however they are now stored in seperate rows, making indexation easier. On top of that, we use the same feature vector for each action (same node distribution and width across the states-space) yielding [math]\displaystyle{ \phi(s) }[/math] instead of [math]\displaystyle{ \phi(s,a) }[/math]. This is obviously not necessary, but keeps things simple and compact (we no longer need to store [math]\displaystyle{ \phi(s) }[/math] at all, just [math]\displaystyle{ \theta }[/math]). It could be better however to tailor the feature-vector to the subset of the state-space in which the action can occur (which could also allow higher precision with a lower amount of nodes).

Library functions

In this section we explain how to use some of the important functions of libvfa

Initialize

Initialization is done using either the constructor or vfa::init. int numberOfActions = 2;
int numberOfStates = 2
double numberOfNodesPerState[2] = {3, 3};
double saturationPerState[2] = {1, 1};
double nodeWidthPerState[2] = {1, 1};
bool normalize = false;
bool varRate = false; //this does not work well
vfa EXAMPLE(numberOfActions, numberOfStates, numberOfNodesPerState, saturationPerState, nodeWidthPerState, normalize, varRate);


or int numberOfActions = 2;
int numberOfStates = 2
double numberOfNodesPerState[2] = {3, 3};
double saturationPerState[2] = {1, 1};
double nodeWidthPerState[2] = {1, 1};
bool normalize = false;
bool varRate = false; //this does not work well
vfa EXAMPLE;
EXAMPLE.init((numberOfActions, numberOfStates, numberOfNodesPerState, saturationPerState, nodeWidthPerState, normalize, varRate);

Local updates

As this involves local function approximation, it suffices to only update local nodes.