Embedded Motion Control 2017 Group 2: Difference between revisions

From Control Systems Technology Group
Jump to navigation Jump to search
Line 248: Line 248:


[[File:doordetection.png|center]]
[[File:doordetection.png|center]]
The doordetection algoritme works in the following sequence:
# first x,y,d,n_actual,n are calculated which are lengths between nodes
# it is checked if (x>0.5m and x<1.5m), if true continue to step 3
# it is checked if (d>(door-thresh)) && (d<(door+thresh)) where threshold is 0.12m and door 0.3m, if true continue to step 4
# check if the calculated distance between p2 and p1 is equal with the actual distance between p2 and p1.
if(abs(n-n_actual)<nThresh*n_actual) if this is true than a door is detected and a decisionpoint is placed in the middle of p4 and p1. nThresh is 0.1 meaning 10% difference is allowed between n and n_actual, if false return to step 1


<u>'''Decison point'''</u>
<u>'''Decison point'''</u>

Revision as of 11:23, 20 June 2017

This Wiki describes the development and implementation process of software which can control Pico and help him to find the exit of a maze. Pico is a driving robot which has a Laser Range finder (LRF) sensor to view the world. It has an omni-base from which odometry measurements are available, unfortunately these measurements are prone to errors. The LRF can be compared to eyes of a human and the odometry to proprioception we have to sense where our limbs are. The only thing Pico is missing is the equivalent to a brain, the autonomous software which is to be developed. Unlike many other implementations seen this year, an intelligent way of solving is used instead of following a wall.

TODO

  • Iedereen: eigen deel
  • Matthijs:
    • evaluatie corridor challenge
    • Gmapping mist veel dingen (instellingen, trade-offs, accuracy, wat kan er mis gaan?) + visualisatie
  • Joeri:
    • evaluatie maze challenge
    • comments in potential field code
    • lopend verhaal van potential field maken
  • Joep:
    • maze challenge architectuur / intro
    • visualiser
    • Voeg ook even final presentation toe bij files
  • Rens: in primitive detection mist het volgende
    • keuze waarom deze methode
    • korte beschrijving hoe muren worden berekend
    • trade-offs, instelling e.d.
  • Sil: Figuren maken
  • Daniel:
  • Joeri/Iedereen: recommendation (Joeri hoofdverantwoordelijk)

Sil is voorstander om de minutes te verwijderen, aangezien er maar twee staan. (of deze moeten aangevuld worden ik heb iig geen notulen gemaakt).

Group Members

Name: Report name: Student id:
Matthijs van der Burgh M.F.B. van der Burgh 0771381
Joep Linssen J.M.H.G.H. Linssen 0815502
Sil Schouten S. Schouten 0821521
Daniël Pijnenborg D.H.G. Pijnenborg 0821583
Rens Slenders R. Slenders 1028611
Joeri Roelofs J. Roelofs 1029491
Yanick Douven Y.G.M. Douven Tutor


Minutes

Minutes of team meetings are available here: [1]

Initial design

The initial design can also be found in File:Initial-design-document.pdf

Introduction: The goal of this project is to autonomously solve a maze with a robot (PICO) as fast as possible. The robot has sensors, actuators and a computer on board to navigate through the maze. The computer runs on Linux 14.04 and the program language used for the software is C++. In this section the initial design is discussed, which consist of the requirements, functions, components, specifications and interfaces. This design will be used to build structured software and define required interfaces.

Requirements: To solve the maze problem the following are required

  • Finding the exit
  • Finding and opening the door
  • Avoiding obstacles at all times
  • The maze should be solved within 5 min
  • All tasks must be executed autonomously
  • The system should work on any maze
  • The robot mustn't get trapped in loops

Functions: The functions which have to be implemented are subdivided into the different contexts. Motion functions describe how the software gets input from and supplies output to PICO. Skill functions describe how different skills are executed in the software. Lastly Task functions implement task scheduling.

The motion functions have been determined as:

  • Basic actuation Give PICO the ability to move around and rotate
  • Getting information Receive information from LRF and odometry sensors.
  • Opening door Make a sound to open door.

The more advanced skill functions are:

  • Mapping Use information from ”Get information” to determine and save a map of the environment. This creates the world model for PICO.
  • Localisation Determine where PICO is located in the map created in ”Mapping”. This will most likely be implemented in the same function.
  • Object avoidance Use current LRF data to make sure PICO does never hit a wall.
  • Maze solving Use the map in combination with current and previous locations within the map to determine a route out of the maze.
  • Door and exit detection Using the map to detect if possible doors have been found and if PICO has finished the maze.

The task control implements switching between the following tasks:

  • Map making Done throughout the challenge to improve current map.
  • Finding doors Done in first stage of the challenge when no door has been found yet
  • Finding the exit Once a door has been found and opened the task is to go through the door and finish the challenge.

Software architechture pre-corridor

The initial design can be put into a diagram, which is shown in Fig: figfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfig. Below the diagram a short recap of the skill, world model and task contexts are given, in order of execution.


Software architecture before corridor challenge

SLAM

The slam algorithm uses the raw odometry and laser data and processes this into a robot pose and world features. The robot pose is defined as the current position and rotation of Pico with respect to the initial pose of Pic. Features are defined as re-observable landmarks, for example corners of walls, and are saved as locations with respect to the initial pose of Pico. A possible method of SLAM is EKF SLAM, but many different types of SLAM exist.

After evaluating multiple SLAM algorithms, it has been decided that EKF SLAM fits bests with the problem. The reason for this choice is that it works well in circumstances where there are clear landmarks, in our case corners, these landmarks can be used in primitive detection as well. It is also effective for problems of moderate size, the data size will not become huge and slow to process for a few hundred landmarks.

World model

The world model is a data structure that holds the detected features, primitives and pose of the robot. It takes feature and pose data from the SLAM algorithm this information is used by primitive detection to find primitives within the world model. Primitives are locations where a major change of movement direction is possible, a point where a decision has to be made.

The data in the world model is used by the state machine and maze solver to solve the maze challenge. Note that the world model does not do any data processing itself, it is merely a container of data.

State machine

Solving the maze is done in three states:

  1. Find door
    In this state the maze solver will have to detect if a possible door is near Pico, if so the state is changed to Open door.
  2. Open door
    When a possible door has been found the bell is to be rang, after which it has to be checked if the door opened. There are two possible outcomes, either there was a door, which opened, or there was no door. In the first case state changes to Find exit, else the state reverts back to Find door
  3. Find exit
    In the find exit state Pico does not search for doors anymore and has to detect if the exit is crossed in which case Pico has to stop.

Maze solver

The maze solver implements a maze solving algorithm that is able to cope with loops in a maze, for example Trémaux. It takes primitive and pose data from the world model. If Pico is within range of a primitive, a decision is made in which direction to move next and sends this data to the driving skill.

Driving

In the driving skill a driving strategy is to be implemented which is able to avoid obstacles while driving in a set direction, taken from the maze solver. Avoiding obstacles means that laser data is required to measure distances to objects in the world.

For the driving skill the best method was chosen to be a potential field method would be the best choice. Correct implementation makes sure Pico will never hit a wall while driving towards a desired location. A downside of this method is that Pico might get stuck if there a wrong decision is made.

Corridor challenge

The strategy for the corridor challenge was to have basic feature detection and potential field working, as well as some form of set-point generation. For feature detection only jumps in the laser data were used, as this indicates corner points of the corridor. This made set-point generation relatively easy, the set-point has to be set just after the first detected corner on the left or right of Pico.

Using this strategy, Pico was able to complete the corridor challenge and delivered with a fourth place. This could have been better, if Pico did not hit the wall twice. The reason for hitting the wall has two causes, divided over the lower and upper part of the software.

Pico was able to detect the corridor early, while it was still far from the corridor. Unfortunately, it also decided early to drive into this corridor. This does not mean that the set-point was placed incorrectly, as it was still placed in the middle of the corridor. But the set-point attracted Pico to the right. This is where the second cause comes in play, the potential-field. The potential-field was not tuned correctly and the radius of Pico was taken into account. This means that the Repulsive forces did not tend to infinity, if Pico's sides were close the wall. This is added afterwards and reduced touching the walls to nearly zero during the following tests. Another way to prevent rapid change of direction is to smoothly switch between set-points, which is also added for the maze challenge.

Software architecture post-corridor

After the corridor challenge it was decided to take a slightly different approach on the SLAM algorithm and split it into SLAM for localisation and feature detection. This is change has been made since SLAM is already implemented and tested within ROS and known to be robust, and therefore focus can be placed on other crucial tasks as primitive detection.

Maze challenge

General toolset

A distinction is made between skills, which are divided in classes, and toolset functions, which implement supporting functionality. Some of these functions help cope with the non-ideality of the real-world, for example in the ideal situation Pico is placed aligned with the maze correctly every time, laser data is noise free and odometry data starts at 0 everytime. Violations of these situations have to be handled, and preferably only at one point in the code; this provides clarity and, most importantly, negates the situation where two modules would operate on different sets of data, while they should not.

Initialisation

The Maze Solver relies on the directions from the Primitive Detection being correct in the world frame: NORTH, EAST, SOUTH and WEST with respect to the initial rotation of the robot have to actually represent this. Furthermore, since the architecture requires that a new Decision Point can be found by driving in one of these cardinal directions. This adds the requirement of the robot being initialised perpendicular to a wall. Since all corners are approximately right angled this results in available directions at every Decision Point corresponding to the actual NORTH, EAST, SOUTH and WEST.

Solving this problem is fairly straight forward using Feature Detection. From the first two features, which are always in the same section, the angle between the two points is calculated. This angle is then used to turn Pico such that is in alignment with it. This is repeated until the angle is within a threshold of approximately 3 degrees. This process is shown in simulation in Fig. figfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfig

After aligning with a wall the first decision is made according to a laser measurement which measures for open directions in the starting position. Finally the starting pose of the mapping is set to the aligned pose, which will be used to retrieve pose data at different locations.

Shadow point filtering

Using the Laser Range Finder in practise raises a problem when scanning an ending wall: shadow points appear. They are ghost measurements, placed at an arbitrary distance behind the wall, but always at exactly the angle to the ending, and are caused by the way the sensor works (detecting reflected laser points). An example of such shadow points is depicted in Fig. figfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfig. Since they negatively effect the Feature Detection and Potential Field, they need to be filtered out.

The Shadow Point Filter uses one attribute of these points to discern and detect them: they commonly don't have many other measured points around them. It thus looks before and after the point in the laser data array for N steps, and checks whether less than M of these points are within a radius r of it. Is this the case, then the point is either removed or set to distance 100. Thus, we keep track of two different arrays, which each have their own usefulness for different applications.

The filter with parameters {N, M, r} = {10, 5, 0.1} applied on the previously depicted figure, is shown in Fig. figfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfigfig

Main skill set

The main skill set implements, as the name suggests, skill functions defined in the architecture.

SLAM

Because of the chosen maze-solving algorithm, a global position is required. The odometry of Pico is inaccurate and therefore useless for determining the position Pico. Localisation on the laser range finder, improves the accuracy of the position. Because the environment is unknown, SLAM, simultaneous localisation and mapping, is needed. Various SLAM algorithms are available. Choosing the correct algorithm, implementing it and tuning it can take a lot of effort, therefore Gmapping[2][3] in ROS is used. Gmapping is a implementation of a highly efficient Rao-Blackwellized particle filter.

Gmapping is only used to provide Pico with a more accurate global position than provided by the odometry. The created map is not used for detection of primitives, therefore the accuracy of the map is irrelevant.


Gmapping is combined with TF[4]. TF handles all the different coordinate frames and their transformations. TF also allows us to transform points in a specific frame to an other frame.

Feature detection

For determining the locations of decision points corner and segment features are required, from which primitive detection can generate decision points. Corner features are defined as locations where two, connected walls meet i.e. a corner, segment features are the features which are not corners which describe beginning and end points of wall segments. In Fig. figfigfigfigfigfigfigfigfigfigfigfigfigfigfig these features are shown, corner features in red and segment features in blue. Since the laser data contains values showing out-of-range data these values are set equal to 100 indicating an open section. In these out-of-range sections no features are set.

The strategy to find segment features is based on the difference between two consecutive laser points, if the difference is greater than a threshold value (set at ................) a segment is detected and both points are set as segment features. For the corner features a split and merge algorithm is applied to every segment (from an even segment feature to the next segment feature, i.e. from 0 to 1 and 2 to 3).

The split and merge algorithm works in the following sequence:

  1. starting node = segment beginning, ending node = segment end
  2. dx and dy are calculated between starting and ending node
  3. distance between measured data and straight line is calculated as:
    dist = abs( dy*x - dx*y + x(start)*y(start) - y(end)*x(start) )/ sqrt( dy^2 + dx^2 )
  4. check if all points are within threshold
    if(maximum distance > threshold)
    
    ending node = index of maximum value
    index of maximum value is a corner node
    goto 2
  5. done

The split and merge algorithm is also shown in Fig. figfigfigfigfigfigfigfigfigfigfigfigfigfigfig, with some resulting examples in Fig. figfigfigfigfigfigfigfigfigfigfigfigfigfigfig. This split and merge algorithm is tested in Matlab first of which executable code is provided in File:Split-and-merge-matlab.zip. As a comparison to the Matlab code also a snippet of the class implementing the algorithm is posted.

Some examples of feature detection using split and merge strategy

Dependencies: Feature detection uses laser data as its input, therefore the quality of the output depends on the accuracy of the data. If accurate data is supplied the parameters defining the strictness of the detection (i.e. the maximum allowed distance between calculated and measured lines) can be increased. This however comes with a major drawback that shadow points result in walls being split into multiple sections, as the laser data makes a jump for shadow points. To prevent this a basic shadow-point filter is implemented.

Another possible cause of error is how out of range data is handled, if this data is discarded there is are circumstances where two sections are joint together. This happens when the range before an out of range section is equal to the range after an out of range section. A result is that two sections are joint and therefore primitive detection will give a wrong output. An example of this behaviour is shown in Fig. figfigfigfigfigfigfigfigfigfigfigfigfigfigfig where the difference is shown in the corridor challenge case.

Trade offs: As mentioned in the Dependencies, the shadow point filter plays a large role in the quality of the features. In this a trade-off has to be made between filtering bad data and removing relevant information. A strict shadow point filter takes out shadow points but also leads to far-away, correct laser data being removed as well (as one laser increment leads to large range difference.

Primitives

The maze can be split up into primitives, part of the maze where the robot can make a significant change in driving direction. The four directions are north, east, south and west. These directions are with respect to the global map. In addition, each direction can contain a possible door. To determine what kind of primitive a certain part of the maze is, features and sections are used, as described in the feature detection. The features location is relative to the robot, so within the local map. To check if the robot is possible to drive in one of the four directions, first the possible directions in the local map are determined. These local directions are: straight, back, right and left.

Primitive detection

Detection of primitives can be done using different methods. The two methods examined are make a correlation between the laser data and all possible primitives or use the

The local direction straight is possible if no section exists in front of the robot or if the section in front of the robot is more than 1.2 meters away. A section is in front of pico when it has a feature in the first and second quadrant. For the straight section it is also checked if it can be a possible door, which is done by looking if the horizontal wall is less then 1.6 meter and if it contains two vertical walls next to the horizontal wall. In the figure below is shown an example of a straight section and a straight section with a door.

Go straight

The local direction back is always possible because it is the direction where the robot is coming from.

The local direction right is possible if enough space is in between two sections or a right section is 1.2 meters away. To determine the space in between two sections, a low and high section need to found. The low section has to start in the fourth quadrant and must be the closes section to the robot. The high section has to start in the fourth or first quadrant, must be a higher section as the low section and must be the closest high section to the robot. In the figure below is shown an example of a high and low section with enough space in between and a right section a distance away.


take a right turn

The local direction left uses the same method as take a right turn only now the features in the second and third quarter are used.

The direction are determined locally but the maze solver needs to know them globally. the local directions are converted using the current angle of the robot into global directions.

Door detection

Doordetection.png

The doordetection algoritme works in the following sequence:

  1. first x,y,d,n_actual,n are calculated which are lengths between nodes
  2. it is checked if (x>0.5m and x<1.5m), if true continue to step 3
  3. it is checked if (d>(door-thresh)) && (d<(door+thresh)) where threshold is 0.12m and door 0.3m, if true continue to step 4
  4. check if the calculated distance between p2 and p1 is equal with the actual distance between p2 and p1.

if(abs(n-n_actual)<nThresh*n_actual) if this is true than a door is detected and a decisionpoint is placed in the middle of p4 and p1. nThresh is 0.1 meaning 10% difference is allowed between n and n_actual, if false return to step 1

Decison point

In addition to the global direction also the location of a primitive need to determined because this is used by the maze solver and the set-point generator. The location of a primitive is called a decision point (DP) and has a global x and y coordinate in the map. The global x location from the robot to the DP must be exactly in the middle of a right/left turn and 0.5 meter in front of a dead end or a door. The global y location from the robot to the DP is zero. To get the global x and y in the map the x and y location of the robot needs to be added. To improve robustness, decision points can only be determined when the robot has a certain angle and an averaging filter is used to filter away wrong decision point.

Simulation

In the GIF below, the robot drives through a simple maze. In the left corner is shown if the robot angle allows to search for new primitives. In the right corner is shown the output of the maze solver. When the robot drives through the maze it finds two decision points. The first decision point contains a possibility to go to right and left. Both possibilities are detected with a low and a high section. The second decision point contains a possibility to go left and is also detected with a low and high section.

Left and right determination

Maze solver

The mazesolver is designed to make decisions at each primitive, it has to make decisions in such a way that it will find its way out the maze in preferably the shortest path. It also has to make sure that the robot does not get stuck in a loop.

There are multiple possible algorithms for designing a mazesolver. Since it is not know where the exit of the maze is strategies using a heuristic, like A* will not be considerd. A few options that we did consider are:


Wall follower This algorithm is very simple it always follows the wall on one side of Pico, which has the disadvantage that there is a possibility for endless loops. An example of a maze explored by a wall-follower algorithm is shown in Fig. figfigfigfigfigfig.

Maze explored using a wall-follower

Pledge algorithm This is an extension of the wall follower algorithm. Next to following a wall, this algorithm also keeps a count of the sum of the turns to avoid obstacles. Using this count it can avoid getting stuck in loops and is therefore a viable option to solve the problem.

Trémaux's algorithm/ Depth-first search The Trémaux's algorithm is an algorithm that remembers the decisions made on a crossing, it uses this information to prevent it form entering the same path twice and thus it should avoid endless loops. This algorithm will also be quicker compared to pledge as it has memory. A visualisation of Trémaux's algorithm is shown in Fig. figfigfigfigfigfigfigfig

The algorithm has the following steps:

  • Mark each path once, when you follow it. The marks need to be visible at both ends of the path. Therefore, if they are being made as physical marks, rather than stored as part of a computer algorithm, the same mark should be made at both ends of the path.
  • Never enter a path which has two marks on it.
  • If you arrive at a junction that has no marks (except possibly for the one on the path by which you entered), choose an arbitrary unmarked path, follow it, and mark it.
  • Otherwise:
    • If the path you came in on has only one mark, turn around and return along that path, marking it again. In particular this case should occur whenever you reach a dead end.
    • If not, choose arbitrarily one of the remaining paths with the fewest number of marks (zero if possible, else one), follow that path, and mark it.

Depth-first is a special class of the Trémaux algorithm, where the solver has a preferred order of choosing paths. Its name comes from the fact that this algorithm will always explore an entire branch of a tree before going to the next one.

Trémaux's algorithm solving a maze

Breadth-first search With breadth first we will first check how many nodes there are connected to the current node and explore these in a fixed order by number, during each exploration the new connected nodes will be numbered incrementally. The biggest difference with Depth-first search is that at each node first all the options are explored before going one node deeper. https://www.youtube.com/watch?v=ec0IJsiIuWk


The wall follower algorithm is not suitable for our application since the maze to be solved might have loops. The Pledge algorithm however might work, but is still a relatively dumb search method and will be slow for large mazes. Trémaux's algorithm/depth-first is already a bit smarter since it keeps track of the intersections it has been on. This requires some memory but not an entire map of the maze, since it is simply possible to follow wall back to the last intersection. Only the coordinates of each intersection with the explored options have to be remembered. This algorithm is better suited for our application than the breadth first algorithm since the breadth first would require the robot to drive back after each iteration while the depth-first only has to drive back on a dead end. Therefore it is decided to use the depth-first algorithm as the maze solver to be implemented.

Implementation

To implement the Depth-first algorithm a class is created to keep track of the nodes at which decisions where made and calculate the next direction to be explored. Such a node would contain its position in the world frame, and the options for each of the for directions. The for directions are NORTH, EAST, SOUTH and WEST with respect to the initial robot pose and are always thus absolute directions in the world frame.

The options for each direction are:

-1 : there is a wall in this direction
 0 : the first time I entered this node, I came from this direction.
 1 : there is a free path in this direction
 2 : there was a door in this direction
 3 : there is an exit trough here.

These were chosen in this way such that the maze solver just can pick the direction with the highest value. After choosing a direction it is set to -1 in the node, this ensures that the robot will not take the same direction the next time it comes at this node. If the robot finds a node with no options to explore it will return to the previous node and explore the next option of this node. If the robot encounters a node that is already in its list but is not a parent to the previous node it will turn around and it will mark the path in that node as explored, -1, this will prevent the robot form exploring the same path twice from different directions.

To ensure the maze solver only makes decisons at actual decision points, a separate function to call the maze solver was created. This function checks if a new primitive really is a new primitive or that it rather is the previous primitive just shifted a bit, further it checks if we are close enough to the primitive to make a decision. Finally if there is a possible door detected this function will first call a function to check for a door and then call the maze solver with the outcome of this function.

The door opening function simply checks the average laser distance in 3 zones left right and in front. After checking the distance it will ring the bell wait a few seconds and check again. If one of the distances has increased over a certain threshold the door is considered opened and the maze solver will decide to go through this door.


Dependencies

If for some reason the maze solver encounters a node which has only -1 options it will be in a deadlock since no direction is valid according to the algorithm. This situation could occur if a decision point was missed and Pico drives to an already explored node. Also having a decision point explored two times results in similar behaviour, this should however not occur as the function to call the maze solver should filter out only good decision points. If a deadlock occurs however, the best option is to reinitialise the software and start solving the maze as if it had not been explored before.

Set-point generation

The setpoint generator provides the system with a global setpoint. This setpoint is afterwards transformed to a local setpoint. This is required, because the potential-field uses only local information. The setpoint is only a position. The rotation of the robot is handled by the potential-field.

The setpoint generator places the setpoint on a straight line in direction chosen by the maze solver. To prevent Pico from touching the walls, the setpoints are always placed on a predefined distance from the center of pico. Therefore the input of the potential-field is bounded at a controllable level. The closer Pico is to the decision point the further sideways the setpoint is placed. This is implemented by constraining one coordinate to the coordinate of the decision point and the other coordinate is free to be calculated, so that the setpoint is at the desired distance. The constrained coordinate is depended of the chosen direction. This is shown in Figure. figfigfigfigfigfig.

Setpoint.png

Potential field

A potential-field algorithm is designed to make sure PICO never collides with walls. A schematic of the repelling and attraction forces is made shown in Fig. figfigfigfigfigfigfigfigfigfig. The green dot is the desired position of the robot, which is the output of the setpoint-generator, the blue dotted circle is the range of the LRF. It is not require to use the full range of the LRF because avoiding collision is only relevant in close range to any walls. For this reason the range of the potential field is limited to 4 meters.

Potential-Field.png


Repelling forces

The repelling forces are calculated by the following formulas:

Frep.png


r_rep is the length of the repelling force vector. a Is the angle of the laser beam in rad, r is corresponding the measured range of the laser. The measured distance is then r subtracted by r_pico the range between the borders of PICO and the LRF sensor. This is done to make sure the force goes to infinity when the robot is at collision with the wall. The laser data (a,r) is converted to(x,y), after this is done the length is calculated and this is taken to the power -3, the closer to the wall the bigger the force. This length is scaled with a factor F_bad, this factor had to be determined during tests.


Attraction force

The attraction forces are calculated by a quadratic equation:

Ratt.png


r_att is the length of the attraction force vector, setpoint_x,setpoint_y are coordinates in the body frame generator by the setpoint-generator, F_good is the tunable parameter during tests.

Aatt.png

a_att is the angle of the vector in rad.

Fa.png

F_a is the attraction force vector. A quadratic equation is used to increase the attraction force for set points far away. The closer to the set point the lower the attraction force.

Speed calculation

Speed is calculated based on the repelling and attraction forces. First both vectors are added to obtain a total force:

Ftot.png

F_tot is the sum of the attraction and repelling forces.

Atot.png

A_tot is the angle between the x and y component of F_tot. These parameters are converted to speed parameters:

Speed.png
avoiding walls with potential field

A snipped of the potential-field class can be found here: https://gitlab.com/emc2017/group2/blob/master/src/potential-field.cpp

Evaluation maze challenge

Numerous parts of the code were changed after the last test session and therefore only tested in simulation. The placement of decision points in open space was added after last test session. Another problem was the speed limit of PICO. The speed limit was reduced from 0.3 to 0.15, because this improved the primitive detection in simulation. This speed limit turned out to be too low, although it improved primitive detection. Due to the friction, PICO was not turning to desired orientation, which stopped Pico from driving. This was embedded in the code to make Pico straight ahead in corridors and not rotated. Besides the driving problem, the other parts of the code were working correctly. After opening the door one decision point was missed and caused Pico to be in a loop where it was stuck in that corner.

Solving mazes!

Solving the maze in simulation

The mazes of this and last year are solved by the code version which was used during the maze challenge. A short gif is shown inf Fig. figfigfgifgifgifig where all parts of our code are working together. The red dot is the generated set-point, the blue line is the total force of the potential field, the purple dots are the detected features and the blue dots are the decision points placed by the primitive detection. In the upper right corner the decision points with the directions are shown. The Upper left corner shows the chosen direction of the maze-solver and the current rotation of the robot. Whenever the angle of Pico with respect to the starting position shows in red, the robot is in an incorrect rotation and the primitive detection is temporarily disabled, because it will not produce correct decision points when rotated 45 degrees.

Full simulation of current and last year are found here:

https://www.youtube.com/watch?v=buuI6-kGCbk

https://www.youtube.com/watch?v=6uX8d2biI_A

Analyse wat er nog fout gaat in filmpjes

Files

File:Initial-design-document.pdf

File:Initial-design-presentation.pdf

File:Final-design-presentation.pdf