Embedded Motion Control 2012 Group 6

From Control Systems Technology Group
Revision as of 15:00, 1 July 2012 by S040183 (talk | contribs)
Jump to navigation Jump to search

Progress

Progress of the group. The newest item is listed on top.

  • Week 1
    • Started with tutorials (all)
    • Installed ROS + Eclipse (all)
    • Installed Ubuntu (all)
  • Week 2
    • Finished with tutorials (all)
    • Practiced with simulator (all)
    • Investigated sensor data(all)
  • Week 3
    • Overall design of the robot control software
    • Devision of work for the various blocks of functionality
    • First rough implementation: the robot is able to autonomously drive through the maze without hitting the walls
    • Progress on YouTube:
      Week3.png
    • The Presentation is available online now.
  • Week 4
    • Studying chapter 8
    • Creating presentation slides (finished)
    • Rehearsing presentation over and over again (finished)
    • Creating dead end detection (finished)
    • Creating pre safe system (finished)
  • Week 5
    • Progress on YouTube:
      Week5.png
  • Week 6
    • Perormed fantasticly during the CorridorChallenge
    • Progress on YouTube:
      Week6.png
    • Discussed and created a software architecture
  • Week 7
    • Progress on YouTube:
      Week7.png
  • Week 8


This progress report aims to give an overview of the results of group 6. In some cases details are lacking due confidence reasons.

The software to be developed has one specific goal: driving out of the maze. It is yet uncertain whether the robot will start in the maze or needs to enter the maze himself. Hitting the wall results in a time penalty, which yields to the constraint not to hit the wall. In addition, speed is also of importance to set an unbeatable time.

For the above addressed goal and constraints, requirements for the robot can be described. Movement is necessary to even start the competition, secondly vision (object detection) is mandatory to understand what is going on in the surroundings. But, the most important of course is strategy. Besides following the indicating arrows, a back-up strategy will be implemented. Clearly, the latter should be robust and designed such that it always yields a satisfying result (i.e. team 6 wins).

Different modules will be designed the upcoming weeks are being developped at this very moment, which form the building blocks of the complete software framework.

But first things first: Our lecture coming Monday! Be sure all to be present, because it's going to be legendary ;) seriously, you don't want to miss this event! Ow, and also be sure to have read Chapter 8 on beforehand, otherwise you won't be able to ask intelligent questions.

To be continued...

Software Architecture

Architecture

The architecture of our software can be seen in the Figure above. The three nodes on the left will process the raw input data gathered from the different sensors. The processed data will be published onto three different topics. The controlNode is subscribed to these three topics in order to read the data. The controlNode contains the algorithm which controls the robot and thus sends the twistMessages. The algorithm within the controlNode is divided into separate functions which are implemented in separate source files. It has been chosen however, not to devide these separate functions into different nodes, in order to reduce the communication overhead. Since the functions within the controlNode do not need to be executed parallel, there is no need for separate nodes.

arrowNode

controlNode

lineNode

Arrow recognition

The arrows help the robot navigating through the maze. In order to decide where to go, the robot should be able to process the following steps:

  • identify an arrow shape on the wall
  • check if the arrow is red
  • determine the arrow point direction
  • use the obtained information

Brainstorm

The ROS package provides a package for face detection[1]. One can see the image as a poor representation of a face, and teach the robot the possible appearances of this face. The program is thought to recognise a left pointing "face" and a right pointing "face". However, one can doubt the robustness of this system. First because the system is not intended for arrow recognition, i.e. it is misused. Possibly, some crucial elements for arrow recognition are not implemented in this package. Secondly, face recognition requires a frontal view check. If the robot and wall with the arrow are not perfectly in line, the package can possibly not identify the arrow. Thirdly, an arrow in a slight different orientation can not be detected.

With these observations in mind, clearly, a different approach is necessary. Different literature is studied to find the best practice. It turned out that image recognition does not cover the objective correctly (see for example[2] ), it is better to use the term pattern recognition. Using this term in combination with Linux one is directed to various sites mentioning OpenCV[3][4] , which is also incorporated in ROS[5][6]. In addition different books discus OpenCV Open Source Computer Vision Library - Reference Manual by Intel Learning openCV by O'Reilly Besides robustness, it is learned that the following possible problems should be taken into account namely different light source and colours close to red.

Algorithm

After studying the material discussed in the previous section, the following arrow detection algorithm is deduced:

  1. Open image
  2. Apply HSV transform
  3. Filter red colour from image
  4. Find contours using Canny algorithm
  5. Approximate the found polygons
  6. Detect the biggest arrow using characteristic arrow properties (e.g. number of corners)
    If an arrow is found
    1. Determine arrow bounding box
    2. Find corners on the bounding box
    3. Determine arrow orientation
      Report direction (i.e. left or right)
      Report no result
    If no arrow is found
    Report no result

Discussion

The pictures below show the first steps from the algorithm, were an arrow is correctly detected.

Original file, step 1
HSV colour space transform, step 2
Filter the red colours, step 3
Arrow outer line, step 4
Approximated outer line, step 5
Bounded arrow, step 6.1

Before continuing the algorithm, some remarks on possible flaws are made.


The picture below, however not so clearly, indicates the light source problem. The HSV transform is not homogeneous for the arrow, due the white stripe in the original file. This resulted in a very noise canny detection and other issues in the rest of the algorithm.

Issue with HSV color space

For sure, the arrow is printed on a white sheet of paper. Concerning the environment of the maze nothing is told, this forced us to check the robustness in an not so ideal environment. Colours close to red are, e.g. pink and orange. A test set-up was created consisting of orange scissors on one side and a nice pink ribbon on the other, see below.

Tricked..
Tricked..

Clearly, the algorithm is fooled. False corners are detected on both objects. Light influences the way red is detected, as a result setting the boundary's for the HSV extraction is quite tricky and dependent on the actual light environment.


As mentioned in the section pitfalls, problems with the HSV extraction were expected. During testing, it turned out the detection on the Pico camera differed from the used USB webcam (possible different colour schemes, lenses, codecs). As the algorithm is on first glance robust, the flaw was expected in the colour extraction (i.e. the HSV image) as a result of hardware differences as well as the light conditions. With the published rosbag file, this problem was studied in more detail. Apparently, the yellow door and red chair are challenging objects for proper filtering. As changing variables, making the code and testing the result got boring, some proper Computer Aided Parameter Adjustment (CAPA) was developed. See the result in the figure below.

Proper calibration made possible with CAPA

The effect of CAPA is clearly shown in the following movie:

CAPA.png

Line detection Node

Since both the corridor and maze challenge do only contain straight walls, without other disturbing objects, the strategy is based upon information about walls in the neighborhood of the robot. These can be walls near the actual position of the robot, but also a history of waypoints derived from the wall-information. The wall-information is extracted from the lasersensor data. The detection algorithm needs to be robust, since sensor data will be contaminated by noise and the actual walls will not be perfectly straight lines and may be non-ideally aligned.

Each arrival of lasersensor data is followed by a call to the wall detection algorithm, which returns an array of line objects. These line objects contain the mathematical description of the surrounding walls and are used by the strategy algorithm. The same lines are also published as markers for visualization and debugging in RViz.


The wall detection algorithm consists of the following steps:

  • Set measurements outside the range of interest to a large value, to exclude them from being detected as a wall.
  • Using the first and second derivative of the measurement points, the sharp corners and end of walls are detected. This gives a first rough list of lines.
  • A line being detected may still contain one or multiple corners. Two additional checks are done recursively at each detected line segment.
    • The line is split in half. The midpoint is connected to both endpoints. For each measurement point the distance to these linear lines is calculated (in the polar-grid). Most embedded corners are now detected by looking at the peak values.
    • In certain unfavorable conditions a detected line may still contain a corner. The endpoints of the line are connected (in the xy-grid) and the absolute peaks are observed to find any remaining corners.
  • Lines that do not contain enough measurement points to be regarded as reliable are thrown away.


The figures shown below do give a rough indication of the steps involved and the result.

Lasersensor data, polar-grid
Lasersensor data, xy-grid

Characteristic properties of each line are saved. The typical equation of a straight line (y=c*x+b) can be used to virtually extend a wall to any desired position, since the coefficients are saved. Also, the slope of the line indicates the angle of the wall relative to the robot. Furthermore the endpoints are saved by their x- and y-coordinate and index inside the array of laser measurements. Some other parameters (range of interest, tolerances, etc) are introduced to match the algorithm to the simulator and real robot. Several experiments proved the algorithm to function properly. This is an important step, since all higher level algorithms are fully dependent on the correctness of the provided line information.


The lineNode also provides an improve of speed by detecting the dead-ends at the left and right of the robot. This is done by comparing two points next to each other and compare it to a threshold value. When a jump in the laser scanner data is detected, there shouldn't be a dead end. There is also a second check to prevent walking into an dead end by detecting a bad connection between two walls.


See this video for a better understanding of how this works. http://youtu.be/2SzBqLgB6DU?hd=1

Navigation algorithm

The navigation algorithm is implemented in the controlNode and uses odometry data, line data (from the lineNode) and arrow data (from the arrowNode) to control Pico. The lineNode provides the following information:

  • A set of lines, extracted from the laserscan data.
    • For each line, properties such as angle with respect to Pico, shortest distance to Pico and a mathematical description of the line ([math]\displaystyle{ y = ax + b }[/math]).
    • Since a mathematical description of each line is provided, the length of each line can be virtually extended to infinite lengths. This enables the algorithm to stop Pico at the center of an adjacent corridor.
  • A pointer to three special lines: the line right next to Pico, the line in front and the line left next to Pico.
  • The width of the corridor on the right of Pico, in front of Pico and on the left of Pico (if any).
  • Information about whether the corridors to the right, in front and to the left are free or blocked.
  • Information about whether these corridors have a dead and or not.
  • Information about whether Pico is currently on a T-junction or not.

To be able to manage the complexity of the controlNode, the controlNode is designed as a statemachine consisting of the following states:

  • Init: This is the initial state. It uses the line data to align Pico with the entrance of the maze to prevent collisions while entering it.
  • EnterMaze: In this state, Pico will enter the maze while driving parallel to the walls.
  • Cruise: This is the main state, it keeps Pico in the middle of the corridor while driving parallel to the walls to the end of the corridor. At the end of the corridor it decides where to go next.
  • TurnRight: In this state, Pico will make a 90 degree turn to the right.
  • TurnLeft: In this state, Pico will make a 90 degree turn to the left.
  • TurnAround: In this state, Pico will make a 180 degree turn.
  • EnterCorridor: This state is an intermediate state between turning and cruising. After a turn is made, the corridor needs to be entered before the cruise mode can be enabled again.
  • Finished: In this state, Pico is outside of the maze and therefore finished the competition.

StateMachine.jpg

Cruise mode

The state machine can be found in the above diagram. The cruise mode is the most important one. It uses the distance to the wall right and left of Pico to keep the middle of the corridor. Furthermore, it uses the angles with respect to the right and left wall to drive parallel with the walls. Corrections are made using a simple, but effective p-controller.

If a wall in front of Pico is detected, the algorithm makes the decision of what the new direction should be. After it made a decision, it stores the width of corresponding corridor (say [math]\displaystyle{ w }[/math]). Now it can drive forward until the distance of the wall in front is [math]\displaystyle{ \frac{w}{2} }[/math]. Using this approach Pico will always remain in the middle of the corridor.

The algorithm will make decisions using the following scheme:

  • If Pico is at a T-junction. The arrowNode will be requested to check for an arrow. If an arrow is detected, Pico will turn in the resulting direction.
  • If Pico is not at a T-junction, or no arrow is detected it will check whether the corridor to the right/front/left is free and is not a dead end (another order of checking the corridors can be selected by 'define' statements).
  • If none of the corridors is free, the algorithm will decide to turn around.

If the algorithm decides to make a turn, the controlNode will store the current angle (from odometry data, say 'startAngle') and go to the corresponding state (turnRight/turnLeft/turnAround). In case the algorithm decides to go straight on, no turning is needed and therefore the algorithm will jump directly to the EnterCorridor state.

In case the algorithm detects that Pico has exited the maze (using the line information), the controlNode will go the the finished state and Pico will be stopped.

Turn modes

Three turn modes are implemented in the controlNode: turnRight/turnLeft/turnAround. These states use the odometry data to calculate the current angle and checks the difference with the start angle stored just before entering this state. This difference is fed to a p-controller to turn Pico to the desired angle.

Since the orientation of Pico is stored in the odometry data as a quaternion, a conversion is required to extract roll, pitch and yaw angles. The following equations can be found on Convert_quaternions

[math]\displaystyle{ \begin{bmatrix} \phi \\ \theta \\ \psi \end{bmatrix} = \begin{bmatrix} \mbox{atan2} (2(q_0 q_1 + q_2 q_3),1 - 2(q_1^2 + q_2^2)) \\ \mbox{arcsin} (2(q_0 q_2 - q_3 q_1)) \\ \mbox{atan2} (2(q_0 q_3 + q_1 q_2),1 - 2(q_2^2 + q_3^2)) \end{bmatrix} }[/math]

Where:

  • Roll – [math]\displaystyle{ \phi }[/math]: rotation about the X-axis
  • Pitch – [math]\displaystyle{ \theta }[/math]: rotation about the Y-axis
  • Yaw – [math]\displaystyle{ \psi }[/math]: rotation about the Z-axis

These equations are implemented and tested. The graph below shows the results of one of these tests. In this case, Pico turns with a constant velocity around its axis. It can be seen that the value of currentAngle increases linearly until the value reaches 180 degrees. At this point the value clips to -180 degrees. This clipping effect causes problems when calculating the difference between the current angle and the angle before turning. AngleData.jpg

This problem is solved by keeping track of the difference of two consecutive angle values. If the difference is bigger than 180 degrees (i.e. a 'clip' has occurred), the calculation of the difference between start and current angle is corrected. Using this correction together with the p-controller, the navigation algorithm is able to make nice 90 and 180 degree turns. After Pico successfully made its turn it first needs to enter the corridor in front before the normal cruise mode can be enabled again. Therefore, the controlNode will go to state EnterCorridor after turning has finished.

Enter corridor mode

After the algorithm just reached the Enter corridor state, there is a free corridor in front of Pico, but the lineNode has detected a wall in front of Pico. In this case (because the corridor in front of Pico is free) the part of the line right in front of Pico is virtual. See an example of this situation below (the detected wall in front of Pico is marked blue). EnterCorridor.jpg

Using the Enter corridor mode, the algorithm will enter the corridor in front of Pico and thereby crossing the virtual wall in front. In this mode, the algorithm will also make sure that Pico remains in the middle of the corridor and aligns Pico with the wall left and right. After Pico has crossed the virtual line in front, the algorithm will jump back to the cruise mode.

This navigation algorithm is tested thoroughly in different mazes. In all cases it succeeded to navigate through the maze without hitting the walls.

See this movie:

Week7.png

Project agreements

Coding standards

  • Names are given using camelCase standard
  • Parameters are placed in header files by use of defines
  • For indents TAB characters are used
  • An opening { follows right behind an if, while, etc... statement and not on the next line
  • Else follows directly after an closing }
  • Comment the statement that is being closed after a closing }

SVN guidelines

  • Always first update the SVN with the following command
    svn up
  • Commit only files that actually do work
  • Clearly indicate what is changed in the file, this comes handy for logging purposes
  • As we all work with the same account, identify yourself with a tag (e.g. [AJ], [DG], [DH], [JU], [RN])
  • To add files, use
    svn add $FILENAME
    For multiple files, e.g. all C-files use
    svn add *.c
    Note: again, update only source files
  • If multiple files are edited simultaneously, more specifically the same part of a file, a conflict will arise.
    1. use version A
    2. use version B
    3. show the differences


Add laser frame to rviz

rosrun tf static_transform_publisher 0 0 0 0 0 0 /base_link /laser 10

TAB problems in Kate editor

In Kate, TAB inserts spaces instead of true tabs. According to [7] you should set tab width equal indention width. Open Settings -> Configure Kate, in the editing section you can set tab width (e.g. 8). Another section is found for Indention, set indention width to the same value.

How to create a screen video?

  • Go to Applications --> Ubuntu software centre.
  • Search for recordmydesktop and install this.
  • When the program is running, you will see a record button top right and a window pops-up.
  • First use the "save as" button to give your video a name and after that you can push the record button.
  • This software creates .OGV files, no problem for youtube but a problem with edditing tools.
  • Want to edit the movie? Use "handbrake" to convert OGV files to mp4.

Remarks

  • The final assignment will contain one single run through maze
  • Paths have fixed width, with some tolerances
  • Every team starts at the same position
  • The robot may start at a floating wall
  • The arrow detection can be simulated by using a webcam
  • Slip may occur -> difference between commands, odometry and reality
  • Dynamics at acceleration/deceleration -> max. speed and acceleration will be set

References

[8] [9] [10] [11]