Embedded Motion Control 2012: Difference between revisions

From Control Systems Technology Group
Jump to navigation Jump to search
No edit summary
No edit summary
Line 14: Line 14:


=Installation=
=Installation=
{{:Embedded_Motion_Control/Ubuntu_Installation}}
== Installing Ubuntu 10.04 LTS ==
Ubuntu can be installed according 2 methods
# Using an USB stick.
# Using the hard drive.
For both methods the most recent installation instructions can be found on http://www.ubuntu.com/desktop/get-ubuntu/download. Make sure that you download the appropriate architecture ie. 32 or 64-bit.
Creating a dual-boot system, ie. installing Ubuntu on the hard drive is the most convenient.
When installing Ubuntu on an USB stick make sure to use some persistence/extra space during the install such that information is still there after a reboot.
 
If you installed Ubuntu on an USB stick you have to make sure that your notebook will boot from the USB stick. This can be edited in the BIOS or for most notebooks during the booting process, <code>F9</code> can be pressed to select the USB drive.


=Group Blogs=
=Group Blogs=

Revision as of 11:26, 18 April 2012

Guide towards the assignment
'Mission to Mars'

Emc-000.jpg

Introduction

Goal

Hardware

Installation

Installing Ubuntu 10.04 LTS

Ubuntu can be installed according 2 methods

  1. Using an USB stick.
  2. Using the hard drive.

For both methods the most recent installation instructions can be found on http://www.ubuntu.com/desktop/get-ubuntu/download. Make sure that you download the appropriate architecture ie. 32 or 64-bit. Creating a dual-boot system, ie. installing Ubuntu on the hard drive is the most convenient. When installing Ubuntu on an USB stick make sure to use some persistence/extra space during the install such that information is still there after a reboot.

If you installed Ubuntu on an USB stick you have to make sure that your notebook will boot from the USB stick. This can be edited in the BIOS or for most notebooks during the booting process, F9 can be pressed to select the USB drive.

Group Blogs

Year 2011

Group 01 - Visit Blog - Bart, Maarten, Stijn, Swan

Group 02 - Visit Blog - Serhat, Sergiy, Sultan, George, Robin

Group 03 - Visit Blog - Ron, Peter, Albert, Jan

Group 04 - Visit Blog - Dennis, Jos, Micha, Matthijs, John

Group 05 - Visit Blog Arjo, Jordan, Ferry, Lazlo

Group 06 - Visit Blog - Bernadette, Arne, Geert-Jan, Erik, Freek

Group 07 - Visit Blog - Rob, Rene, Rico, Pave, Nick

Group 08 - Visit Blog - Juan Camilo, Muhammad, Faran Ahmed, Handian, Haixu

Group 09 - Visit Blog - Edward, Marcel, Rene, Mirjam, Jacqueline

References