Embedded Motion Control/Tutorials 2015: Difference between revisions

From Control Systems Technology Group
Jump to navigation Jump to search
No edit summary
No edit summary
Line 15: Line 15:
# [[ Embedded_Motion_Control/Tutorials/Towards an autonomous robot | Towards an autonomous robot ]]
# [[ Embedded_Motion_Control/Tutorials/Towards an autonomous robot | Towards an autonomous robot ]]
# [[ Embedded_Motion_Control/Tutorials/Obtaining laser and odometry data | Obtaining laser and odometry data ]]
# [[ Embedded_Motion_Control/Tutorials/Obtaining laser and odometry data | Obtaining laser and odometry data ]]
# [[ Embedded_Motion_Control/Tutorials/Sharing your project through git | Sharing your project through git ]]
<!--


<!--
# [[ Embedded_Motion_Control/Tutorials/Sharing your project through git | Sharing your project through git ]]
# .. More tutorials coming up ..!
# .. More tutorials coming up ..!



Revision as of 21:42, 4 May 2015

  1. Introduction
  2. Installing Ubuntu
  3. Customizing Ubuntu
  4. Do the following C++ tutorials:
    1. cplusplus.com: up to and including Name visibility
    2. MIT's Introduction to C++: up to and including Classes
    • Remarks:
      • For now, use a simple editor such as gedit (the ubuntu version of Notepad). We will install a more advanced editor (IDE - Integrated Development Environment) later.
      • Once you have saved your C++ program (e.g. as example.cpp), it can be compiled from a terminal using:
        g++ example.cpp -o example
        and run with
        ./example
  1. Installing the EMC environment
  2. Setting up your project
  3. Setting up an IDE
  4. Setting up the PICO simulator
  5. Towards an autonomous robot
  6. Obtaining laser and odometry data
  7. Sharing your project through git