Drone Referee - MSD 2018/9

From Control Systems Technology Group
Jump to navigation Jump to search
The Drone Referee

Introduction

Football is a long-lived and well-liked sport which is a widespread passion nowadays. Consequently, it represents a growing industry with a huge market size. On the other hand, technological advancements are growing rapidly in different sections of humans’ lives, sports and more specifically football is not an exception. Some examples of the new technologies used are: automatic goal detection [1], use of trackers to monitor players' performance [2], soccer robots (the players are robots) [3], etc.


One possibility of technology usage in football matches is to use a drone referee instead of a human referee or a camera system covering the field. This system provides several advantages with respect to the mentioned conventional refereeing methods. First, human referees are naturally prone to human errors, which are one of the main sources of controversy in the game by possible unfair decision making. A camera-based autonomous system would remove the unfairness factor since every game would be refereed according to the same algorithm and would cover virtually any possible game situation, it is still rather very expensive in many situations such as regional games. A moving camera provided by the drone can therefore replace such an expensive system, and therefore appeal to a large market. While the technology to automatically enforce the rules of the game based on video is not available yet, a camera system capturing important game situations can assist a remote referee, by providing video and repetitions based on which, the he/she is able to provide some decision and send them to the ultimate referee.

The use of a remote referee also makes sense in a robot soccer match, where, although the players are robots, the referee is still human. In this case, in addition to the difficulties of a human players football match refereeing, there are some rules in particular which are difficult to be checked and enforced by a human referee but rather easy for an autonomous referee with a vision system.

In summary, the current football industry can be described by:

• Football is a growing industry with a market size of several billions of euros.

• Human referees, naturally are prone to human errors.

• Unfair situations will happen in a game; where, both financial and emotional stakes are high.

Solution

• Autonomous refereeing system

Tasks

Design an autonomous referring system for Robocup middle size league (MSL) using drones.

Deliverables

1. System Architecture

2. Drone refereeing system

3. Wiki page documentation

Architecture

In this part we introduce CAFCR and its role in building our architecture (RAS & MSL)

Introduction and overview

CAFCR

Referee aiding system

Referee aiding system (RAS)

RAS CAFCR

RAS use case

RAS-Game-Running-UseCase.png

RAS context diagrams

RAS-Context-Diagram.png

MSL/Ball-Following 2D

MSL/Ball-Following 2D CAFCR

MSL/Ball-Following 2D use cases

MSL/Ball-Following 2D context diagrams

MSL-Context-Diagram.png

MSL/Ball-Following 2D sub-systems

Drone

World model

Functions:

  • Acts as system’s model, avoiding lateral dependencies between sub-systems,
  • State storage for the whole system,
  • Master message-passing node for sub-systems,
  • Single logging point of the system.

Camera footage system and HMI

Supervisor

Introduction

The supervisor is a subsystem of RAS. This subsystem is responsible for providing high level control states for the other subsystems of RAS. Furthermore, it is responsible for translating user commands to states. The supervisor subsystem monitors the overall safety of RAS.

Architecture constraints

RAS

The supervisor subsystem is responsible for keeping record of the states of RAS.

The supervisor must capture the game, before game, emergency situation in its states.

The states of the supervisor must be accessible to other subsystems of RAS.

Drone MSL

Supervisor states must include drone positioning as additional states.

Supervisor must include drone emergency situations in its states.

Supervisor states are independent on MSL sub-packages (2d, gimbal, inclined?)

Supervisor takes input from MSL referee box through json interface.

Supervisor takes land, take off, safe to land from remote referee through world model

Supervisor gives the high level game states as outputs through world model

Supervisor enabled the RR to land from any point in the field.

Supervisor enables the drone to take off after takeoff command receive from RR.

Supervisor enable the drone to start refereeing the game after receiving the start game signal form MSL referee box.

Supervisor dictates that after a half time ends drone will hover above landing position.

Supervisor dictates that after receiving the land command drone will hover above landing position.

Supervisor enables the landing of the drone after checking it safe to land from both RR and drone action planner. State transition: check with AP requirements.

System description

In this section, a description of the supervisor subsystem for the MSL 2D architectural package will be shown. The description is divided into four points. These points are scenarios, purpose, inputs and outputs.

Scenarios

In the upcoming sub-section, selected game operation scenarios are presented. The purpose of these scenarios is to show the sequence of events of running game. These sequences are the result of application of the requirements or constraints to our drone referee system. In the next part, we will try to use these scenarios to obtain supervisory states for our MSL 2D architectural package. These scenarios are game, intentional landing and emergencies scenarios.

Game scenario

This scenario shows a complete sequence for the first half time of a MSL 2D game. The step sequence is the following:

1. RR makes sure robot players are positioned in center.

2. RR press take off using HMI.

3. Drone takes off then flies to start position. For MSL 2D ,the start position is the center of the pitch.

4. Drone is hovering at start position.

5. MSL referee issues start game signal.

6. Game starts.

7. Drone starts the refereeing technique.

8. First half time is over.

9. MSL referee issues the end of the 1st half time signal.

10. Drones hovers above landing position.

11. RR presses it is okay to land in HMI.

12. Drone lands in the landing position.

13. Drone is waiting for another game start.

Intentional land scenarios

These scenarios represent situations where the RR wants to land the drone before and during game. In this document, two scenarios are shown. The first scenario (ILS1) ,where; the RR wants the drone to land before game start. While, the second one (ILS2), where, RR wants the drone to land during the game. The sequence of steps of ILS1 is:

1. RR makes sure robot players are positioned in center.

2. RR press take off using HMI.

3. Drone takes off then flies to start position. For MSL 2D ,the start position is the center of the pitch.

4. Drone is hovering at start position.

5. RR presses land in HMI.

6. Drones hovers above landing position.

7. RR presses it is okay to land in HMI.

8. Drone lands in the landing position.

9. Drone is waiting for another game start.

While, the steps for ILS2 are:

1. RR makes sure robot players are positioned in center.

2. RR press take off using HMI.

3. Drone takes off then flies to start position. For MSL 2D ,the start position is the center of the pitch.

4. Drone is hovering at start position.

5. MSL referee issues start game signal.

6. Game starts.

7. Drone starts the refereeing technique.

8. RR presses land in HMI.

9. Drones hovers above landing position.

10. RR presses it is okay to land in HMI.

11. Drone lands in the landing position.

12. Drone is waiting for another game start.

Drone Emergencies scenarios

In these scenarios, three sets of sequences are presented. These sequences deal with only one kind of emergency. This emergency is related to battery emergency at different moments the game. These moments are before game start and drone is still in land (EMS1), drone is hovering at center before game start (EMS2) and during game (EMS3). The sequence of steps of EMS1 is:

1. Before game, drone is on land

2. Drone emergency occurs

3. Drone is not able to takeoff despite any command given by RR

4. Drone will only be able to take off again only when emergency is solved

For EMS2, the sequence is :

1. RR makes sure robot players are positioned in center.

2. RR press take off using HMI.

3. Drone takes off then flies to start position. For MSL 2D ,the start position is the center of the pitch.

4. Drone is hovering at start position.

5. Drone emergency occurs

6. Drone lands

7. Drone is not able to takeoff despite any command given by RR

And for EMS3, the sequence is:

1. RR makes sure robot players are positioned in center.

2. RR press take off using HMI.

3. Drone takes off then flies to start position. For MSL 2D ,the start position is the center of the pitch.

4. Drone is hovering at start position.

5. MSL referee issues start game signal.

6. Game starts.

7. Drone starts the refereeing technique.

8. Drone emergency occurs

9. Drone lands

10. Drone is not able to takeoff despite any command given by RR

11. Drone will only be able to take off again only when emergency is solved Functions

From the previous scenarios and constraints, the functions of the sub-system supervisor can be presented by these points:

• To take the remote referee’s commands, referee box game states and drone emergency as inputs

• To provide high level control ( game) states according to inputs.

• To provide reaction to emergency situations

The other sub-systems will take action based on the high level abstract states. In figure , a context diagram for the supervisor subsystem is depicted. In this diagram, the inputs and outputs of the system are shown. Furthermore, the possible messages for each input or output are shown. In the figure, the system boundary line separates the subsystems of the drone referee form the outside environment.

Over 4.png

Figure 1 Context diagram for the supervisor subsystem.


Inputs

Remote referee

The supervisor takes the takeoff, land and safe to land commands from the remote referee via HMI through world model.

Monitoring system

The supervisor reads the emergency status in the world model. This status is written by the monitoring system. Referee box

The supervisor reads the game status from the MSL HMI (ref box). Based on this status , supervisor can know when game starts and ends. Action planner

Action planner sends a “safe to and signal” to world model. The supervisor reads that signal from world model. Drone can only land when the two safety checks are fulfilled.


Output

High level control (game) states

Supervisor write these states into world model. Other subsystems like action planner read these states and take action based on them.

Design choices

For the MSL 2D, the supervisor will have 5 states. The transition between these states are governed by transition conditions. These conditions are based on the values and combinations of the so called transition variables and the transition variables are based on the inputs of the supervisor subsystem. States

The 5 states of the supervisor are presented in table 1. Furthermore, table 1 shows the description of each state.


Table 1 State description

T11.PNG

Transition variables

In table 2, the description, value, condition of each transition variable are shown.

Table 2 Transition variable description

T22.png


Transition conditions

They are conditions consisting of the variables and mathematical operators. The operators are || (OR) , == (EQUALS) and && (AND). Whenever, the condition is true, the supervisor is allowed to move from the current state to the future one. Tables 3 shows the description of each condition, the current state and the future sate.

Table 3 Transition conditions

T33.PNG

State machine

The complete state machine of the supervisor subsystem is shown in figure 2. The initial state of the system is S1. In the figure, the states, variables and conditions are shown. Furthermore, the output (high level control (game) states) of the supervisor is presented in the variable game_state. This variable is sent to world model and can be read by other subsystems.

State.png

Figure 2 State machine of the supervisor subsystem

Reaction to emergency situations

In MSL 2D, there are two emergency situations. The first one is drone emergency. While, the second one is dependent on the remote referee’s estimation. For both of these situations, the drone will land.

Assumptions

• RR must make sure that robots are in starting place while drone is hovering above starting position.

• RR must make sure that is safe to takeoff before pressing safe to take off in HMI.

• The drone emergency situations considered in the systems are only battery emergencies.

• RR must make sure there are no obstacles in the airfield and landing position.

• RR must make sure the safety net is closed.

• During game pauses drone will still follow the refereeing strategy.

• System’s initial state is always at S1


Technology

For this supervisor, Matlab Stateflow was used [add ref].


Recommendations

Emergency situations

Supervisor should consider other drone emergency situations. These situations can be obtained after experimentation of the system in several test runs. Furthermore, additional functional safety measures could be considered for each subsystem.

Model based supervisor

It was not possible for our team to model each subsystem separately and make maximal permissive supervisor with the time resources we had. Furthermore, the drone manufacturer used Matlab Simulink to control the drone. Designing a maximally permissive supervisor on Matlab is very difficult. Our recommendation is to model the subsystems using other supervisory control tools. After finishing the supervisor start couple it with Matlab. The challenge in this case would be modeling, capturing requirements and supervisor synthesis. [ add ref]

Simulation

The software simulation has been implemnted to test and simulate the system. In the simulation, the hardware parts has been simulated. These parts have been highlighted in the context diagram below.

Sim 1.png

Drone

Simulated by use of dynamic equations of motion Instead of receiving feedback from sensors, it is received from the dynamic equations directly. Instead of sending PWM (pulse width modulation) to the brushless motor drivers, it is sent to the dynamic equations.

Remote control

Simulation is simulated in Simulink. Instead of sending data over X-bee, signals are directly connected in Simulink.

Sim 2.PNG


Features

Simulated remote control

MSL referee box

Simulated view port of the camera

Remote refer HMI with out live camera feed

Sim 3.png

Simulation video

[1]

Full system integration with hardware in loop drone (HIL)

Purpose

Test all subsystems except for the drone, while MSL game is running.

Provide a proof of concept of the whole refereeing system

Act as mitigation action if Avualr hardware fails.

Test conditions

Te 1.PNG

Test record

Teest.PNG

For the video, press this link [2]

MSL/Ball-Following Gimbal

MSL/Ball-Following Gimbal CAFCR

MSL/Ball-Following Gimbal use case

MSL/Ball-Following Gimbal context diagrams

Project Management

Introduction

Project management plan

Integration plan

Levels

Level 0 before world model integration (highest priority) Level 1 (two system elements together), 6 possible integrations Level 2 (three system elements together), 4 possible integrations Level 3 (Four system elements together), 1 possible integration Level 4 (Five system elements together), 1 possible integration

Level 0 before world model integration (highest priority)

HMI + Camera = HMI with camera (chosen by team) Action planner + drone = Linked action planner (should be implemented by Avular) Ball & Robot from Tech-united + drone from Avular = Position system (ball & robot & drone)

Level 1 (two system elements together), 6 possible integrations

Supervisor + HMI with camera Supervisor + Position system (ball & robot & drone) Supervisor + Linked action planner Position system (ball & robot & drone)+ HMI with camera Position system (ball & robot & drone)+ Linked action planner Linked action planner + HMI with camera

Level 2 (three system elements together), 4 possible integrations 

Supervisor + HMI with camera + Linked action planner  Supervisor + HMI with camera + Position system (ball & robot & drone)  Supervisor + Linked action planner + Position system (ball & robot & drone)  Linked action planner + HMI with camera + Position system(ball & robot & drone) 


Level 3 (Four system elements together), 1 possible integration

Supervisor + HMI with camera + Linked action planner + Position system (ball & robot & drone)

Level 4 (Five system elements together), 1 possible integration

Supervisor + HMI with camera + Linked action planner + Position system (ball & robot & drone)+World Model  GOAL!

Communication management plan

Quality management plan

Test management plan

Risk analysis

Implementation

Drone

Introduction

The drone is the main hardware subsystem of the RAS. This subsystem includes sensors, microcontroller, communication ports and mechanical components. The drone used in this project, is the last version of Avular curiosity drone provided by Avular company. The drone can be programmed by means of Matlab Simulink. All the other subsystems must eventually be implemented on the drone to achieve the final goal of game refereeing.

Architecture constraints

  • RAS:

The drone must be able to fly autonomously.

The drone is responsible to follow the command of action planner through world model

The sensors data must be accessible to world model (the other subsystem of RAS)

The drone should provide the battery level information to other subsystems.

The drone must have the possibility of installing the footage camera on it.

  • Drone MSL:

The drone must be able to fly for 5+2 minutes and show the battery level all the time.

Overview

Figure ?- Drone subsystem working overview

The main challenge about the drone is how to program it so that, it can follow the required actions. An overview of this process is shown in figure ?.

System description

The drone is the main hardware subsystem of drone referee system which consists of different components and subsystems itself. The main task of the drone is to receive commands in real time from a remote computing module (usually a PC) and follow the action required from action planner while carrying the footage camera. For this need,the main challenge is programming the drone and setting the wireless connection for sending wireless data to the microcontroller present on the drone. There are three main computation modules called “Low-Level Module”, “High-Level Module” and “Compute Module”. Each one of the Low-Level, High-Level, and Compute Modules is connected to a different set of sensors, actuators or communication devices. The idea is to use Low-Level Module for calculations related to flight stabilization and monitoring the current status of the drone, and use the High-Level Module for other high-level calculations (such as path planning or position control of the drone) which can be different depending on the project requirements. For projects that require intensive computations, the Compute Module can also be used in combination with both High-Level and Low-Level Modules. Each one of the High-Level and Low-Level Modules uses one 180MHz Cortex-M4 processor and the Compute Module is a Raspberry-Pi Compute Module 3.


Design choices

Subsystem results (demo)

World model

  • Binary serialization of data for each interface,
  • Uses UDP for sending/receiving information for each interface,
  • Implemented in Simulink,
  • Simulink and C# clients are implemented.

Camera footage system and HMI

Supervisor

Action planner

Localization systems

Function

Provides the ball, individual robots and drones positions to the world model.

Ball localization system

Requirements and architecture constrains

Positioning System shall be able to:

1. Get ball’s position from any two teams playing in the field, when deployed for Robocup Middle Size league

2. Work with MSL’s standard data interface for monitoring game states (physical/non-physical), when deployed for Robocup Middle Size league.

3. Get position of any type/number of drone’s being used by the DR System.

4. Positioning System specification/implementation shall not be dependent on TechUnited or any other teams Design Choices, when deployed for Robocup Middle Size league.


System description

In a robot soccer team each of the turtles(soccer robots) and their DevPC of the team share data using a RTDB. The turtles share set of data that contains the robot id, robot position, ball position, ball velocity and the ball confidence. The DevPC hosts this RTDB server. According to the MSL rules each participating team are required to log these data on to the referee base station.

Overview

Overview.png

            Figure 8, Block diagram of the positioning system

As shown in figure 8 there is an executable that reads data from the RTDB and converts into JSON(Java Script Object Notation) strings. This data is then transmitted over a TCP(Transfer Control Protocol) connection. The DevPC hosts the TCP server and the base stations acts as the TCP client and receives this data.


This system keeps receiving the JSON data until the connection is manually interrupted or a transmission error is encountered. The positioning system then receives the JSON data and parses them.


Positioning system parameters

           Figure 9 Integrated positioning system with world model


The Simulink block takes in the IP address of the TCP server and the team name as a parameter as shown in figure 3 and outputs the ball position with the highest confidence. In case of equal confidence the value with lower ID value is considered. The block also outputs position of the individual robots.


Drone localization system

Requirements and architecture constrains

???????????????????????????????????????????


Drone localization system overview

Overview 2.png


Figure 10, Overview of the drone localization system

Technology

The system was implemented using Avular ultra wide band system

Demonstration

Conclusion and recommendations

Appendix