Chimney

From Control Systems Technology Group
Jump to navigation Jump to search
Quick Links
Project Trajectory Project Pages
Home Problem Definition Opening Scenarios
Planning and Milestones Background Research Chimney Rules & Regulations
Meetings Requirements Chimney to Cubby
Design Method(s) Brainstorm Cubby to Person  
Personal Logs Concepts Chosen Software
Peer Review & Reflection Whole System  





Build plan

We found existing solutions to the problem we had in our chimney. In the chimney packages have to be moved down to a lower level. Of course, this has to happen with caution so the content of the package does not break. The solutions we found are made by the company Qimarox, which is a leading manufacturer of components for material handling systems.[1] Their material handling systems are made in such a way that they are quickly and easily installed and modified to fit its application, they are versatile and can combine different task, and they require little maintenance.[1] Especially the first and the last of these three properties come in very handy in our application. They offer three different products for the vertical movement of packages. Of these three products, two are especially promising for our chimney, the Prorunner mk1 [2], and the Prorunner mk5 [3].

Prorunner mk1

The Prorunner mk1 looks most like the package elevator we had in mind. It is a simple platform that it moved up and down. It is a sturdy steel structure that can lift packages up to 100 kilograms and has a capacity of up to 650 movements per hour. These specifications both exceed our demands. Such a system in our chimney will only have to be able to handle packages of up to 2.5 kilograms, and it will never receive more than 650 packages in an hour.[2] Maybe it is possible to make a similar system that is smaller and is more limited, which could make it cheaper too.

Prorunner mk5

The Prorunner mk5 is more like the 'Mill' concept we had in mind. It makes use of a vertical conveyor belt with platforms attached to it. This is also a viable option, but can handle even more packages an hour than the Prorunner mk1, namely 3,000, and it can handle packages up to 50 kilograms.

After looking at the specifications of both products a system like the Prorunner mk1 looks more viable for our chimney than the Prorunner mk5. It is smaller, simpler, and cheaper. It would be even better to have a similar system that does not exceed our requirements as much as the mk1 does. This would make it even cheaper and just as good for our chimney. The system would only have to be able to carry up to 10 kilograms, which is four times the maximum package weight. It is then well-suited to handle the current packages, and it will still be suitable when the maximum package weight rises.

Elevator platform

Elevator platform

The elevator platform needs an addition in order to be useful in our system. That is, the platform must be able to push the package off of the platform. This will be done by one powered roller among the smooth rollers of which the platform exists. This special roller will be powered by a rotational actuator. This rotational actuator will be powered by a cable on a coil, so it can vary in length, which comes from the control center of the elevator system. From there it is powered on and off when needed. Moreover, this particular roller will have a special surface to have a better grip on the package.

[1] About Qimarox

[2] Description Prorunner mk1

[3] Description Prorunner mk5

How it works

1. Chimney receives package.
The elevator system in the chimney needs to know whether a package is in the chimney or not. This will be identified by the RFID reader in the chimney. Being able to read an ID is the verification for the system that there is a package in it.

2. Chimney receives package drop off location.
The chimney uses the package ID it extracts from the RFID tag to 'ask' the control center to which cubby level the package has to be taken. It then sends a signal to the control center that it starts its descent and that it is not able to receive a package anymore.

3. Chimney drops off package at right level.
The package will be standing on the elevator platform. When the right cubby level is reached, the rotational actuator will be activated. This roller pushes the package off of the platform onto a conveyor belt.

4. Chimney returns to top level.
The elevator system will receive a signal that the package has gone further into the system. It then returns to the top level from where it can receive a package. When it reaches the top level, it will give a signal to the control center that it is ready to receive a new package.

Test Plan

Because we will be building a chimney with a lift only we don't need to test to see which is better anymore.