RoPod/Tutorials/Matlab Installation

From Control Systems Technology Group
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

In order to install Matlab, run the following commands:

sudo apt-get install cifs-utils
sudo mkdir /mnt/matlab 

Then follow this instructions: https://intranet.tue.nl/en/university/services/ict-services/help-and-support/software-tue-device/matlab-for-linux/

Install (at least) the following toolboxes:

  • Embedded Coder.
  • Other desired toolboxes.

Later you can add more toolboxes if needed by following the same installation instructions.

In the next set of instructions, we are going to install the Matlab and RoPod interface.