PRE2019 3 Group4 Printing

From Control Systems Technology Group
Revision as of 16:51, 25 March 2020 by S168197 (talk | contribs) (Created page with '==Printing== First of all the case was divided in 3 separate parts. This was done to make the printing easier since each part now properly fits on the base plate. Our printing …')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Printing

First of all the case was divided in 3 separate parts. This was done to make the printing easier since each part now properly fits on the base plate.

Our printing contact is located in Eindhoven. He had his printer placed at his student-home. The first problem we faced was that the filament we bought didn’t stick properly on the base-plate of the printer. In this case, often something like hairspray is used. But even this wouldn’t make the print stick. The ultimate solution for this was to cover the base plate with sticky tape, which solved this problem.