PRE2018 3 Group11: Difference between revisions

From Control Systems Technology Group
Jump to navigation Jump to search
Line 89: Line 89:
[https://mashable.com/article/google-ar-maps/?europe=true|Google made AR available for a small group of users already]
[https://mashable.com/article/google-ar-maps/?europe=true|Google made AR available for a small group of users already]
   
   
* '''iPhone Flyover'''
* '''iPhone Flyover''' [https://en.wikipedia.org/wiki/Apple_Maps#Flyover_and_3D_maps|Apple Flyover]
[https://en.wikipedia.org/wiki/Apple_Maps#Flyover_and_3D_maps|Apple Flyover]
In Maps on iphone you can fly over many of the world's major cities and landmarks. It lets you get 3D views of a selected area.
In Maps on iphone you can fly over many of the world's major cities and landmarks. It lets you get 3D views of a selected area.



Revision as of 19:17, 27 February 2019

<link rel=http://cstwiki.wtb.tue.nl/index.php?title=PRE2018_3_Group11&action=edit"stylesheet" type="text/css" href="theme.css"> <link href='https://fonts.googleapis.com/css?family=Roboto' rel='stylesheet'>


Organization

The group composition, deliverables, milestones, planning and task division can be found on the organization page.

Brainstorm

To explore possible subjects for this project, a brainstorm session was held. Out of the various ideas, the Follow-Me Drone was chosen to be our subject of focus.

Problem Statement

The ability to navigate around one’s environment is a difficult mental task whose complexity is often dismissed by most of us. By ‘’difficult’’, we are not referring to tasks such as pointing north while blindfolded, but rather much simpler ones such as: following a route drawn on a map, recalling the path to one’s favourite cafe. Such tasks require complex brain activity, which causes the broad skill of ‘navigation’ to be present in humans in diverse skill levels [citation needed]. People whose navigation skills fall on the lower end of the scale do seem to be slightly troubled in their everyday life; it might take them substantially longer than others to be able to find their way to work through memory alone; or they might get lost in new environments every now and then. However, it is important to note, that this is a dynamic grey-scale; there is no line between ‘good’ and ‘bad’ navigation.

Navigation skills can be traced back to certain distinct cognitive processes (to a limited extent, nevertheless, as developments in neurosciences are still progressing [1]), which means that a lesion in specific brain regions can cause a human’s navigational abilities to decrease dramatically. This was found in certain case studies with patients that were subject to brain damage, and labeled “Topographical Disorientation” (TD), which can affect a broad range of navigational tasks [2]. Within the last decade, cases started to show up, in which people showed similar symptoms to patients with TD. However, they did not suffer any brain damage and were normally functioning in all other aspects. This disorder was termed “Developmental Topographical Disorientation” (DTD) [3], which, as was recently discovered, might affect 1-2% of the world's population (it is important to note that this is an estimate based on studies and surveys) [4].

Many of the affected people cannot rely on map-based navigation and sometimes even get lost on everyday routes. To make their everyday life easier, one solution might be to use a drone. The idea of the playfully-named “follow-me drone” is simple: By flying in front of its user, accurately guiding them to a desired location, the drone takes over the majority of a human’s cognitive wayfinding tasks. This makes it easy and safe for people to find their destination with minimized distraction and cognitive workload of navigational tasks.

The first design of the “follow-me drone” will be mainly aimed at severe cases of TD, with the goal of giving those people a little bit of their independence back. This means that the design incorporates features that might make the drone more valuable to its user with repeated use and is not only thought-of as a product for rare or even one-time use as part of a service.


User

Society

The societal aspect of the follow-me drone regards the moral standpoint of society towards cognitively-impaired individuals. Since impairments should not create insuperable barriers in the daily life of affected people, it can be seen as a service to society as a whole to create solutions which make it easier to live—even if that solution only helps a small fraction of the world's population.

Enterprise

Since this solution is unique in its concept and specifically aimed at a certain user group, producing the drone is a worthy investment opportunity. However, the focus should always stay on providing the best possible service to the end-users. User-centered design is a key to this development.

Approach

In order to get to a feasible design solution, we will do research and work out the following topics:

  • User requirements
    • Which daily-life tasks are affected by Topographical Disorientation and should be addressed by our design?
    • What limitations does the design have to take into account to meet the requirements of the specified user base?
  • Human technology interaction
    • What design factors influence users’ comfort with these drones?
    • Which features does the technology need to incorporate to ensure intuitive and natural guiding experiences?
      • How to maximise salience of the drone in traffic?
      • What velocities, distances and trajectories of the drone will enhance the safety and satisfaction of users while being guided?
    • Which kind of interfaces are available in which situations for the user to interact with the drone?
  • User tracking
    • How exact should the location of a user be tracked to be able to fulfill all other requirements of the design?
    • How will the tracking be implemented?
  • Positioning
    • How to practically implement findings about optimal positions and trajectories?
  • Obstacle avoidance
    • What kind of obstacle avoidance approaches for the drone seem feasible, given the limited time and resources of the project?
    • How to implement a solution for obstacle avoidance?
  • Special circumstances
    • What limitations does the drone have in regards to weather (rain, wind)?
    • How well can the drone perform at night (limited visibility)?
  • Physical design
    • What size and weight limitations does the design have to adhere to?
    • What sensors are needed?
    • Which actuators are needed?
  • Simulation

Alternative Solutions

3D Navigation is an alternative technology that can be used instead of the Follow-Me Drone. TomTom 3D Navigation is already used in new generation Peugeot cars. Apple has a Flyover feature that lets you get 3D views of a certain area. While it does not act as a navigator, it lays a foundation for the development of 3D mobile navigation.

  • Google Maps

Google Maps has announced and demonstrated a new feature that works in tandem with Street View. Now the user will be able to navigate streets with a live view on his phone’s screen overlaid with navigational instructions. The user can walk around streets pointing their camera towards buildings and receiving information about those buildings. This is perfect for DTD patients because they have trouble recognizing landmarks. On top of that, it provides personalized suggestions, so the user can essentially get a notification once they point their phone at the direction of a building what this building is and why it is suggested. The overlay becomes more effective when combined with an earlier project **Google Glass**, especially for DTD patients.

References:

Maps is getting augmented reality directions and recommendation features made AR available for a small group of users already

In Maps on iphone you can fly over many of the world's major cities and landmarks. It lets you get 3D views of a selected area.

“WRLD 3D maps provide a simple path to create virtual worlds based on real-world environments”. This provides a platform for further app development which means even if Google and Apple do not provide APIs to the backends of their respective technologies, then the WRLD platform facilitates the same functionality.

Solution

Here we discuss our solution. If it exists of multiple types of sub-problems that we defined in the problem statement section, then use separate sections (placeholders for now).

Requirements

Aside from getting lost in extremely familiar surroundings, it appears that individuals affected by DTD do not consistently differ from the healthy population in their general cognitive capacity. Since we can't reach the targeted group, it is difficult to define a set of special requirements.

  1. The Follow-Me Drone has a navigation system that computes the optimal route from any starting point to the destination.
  2. The drone must guide the user to his destination by taking the decided route hovering in direct line of sight of the user.
  3. The drone must guide the user without the need to display a map.
  4. The drone must provide an interface to the user that allows the user to specify their destination without the need to interact with a map.
  5. The drone announces when the destination is reached.
  6. The drone must fly in an urban environment.
  7. The drone must keep a minimum distance of two? meters to the user.
  8. The drone must not go out of line of sight of the user.
  9. The drone must know how to take turns and maneuver around obstacles and avoid hitting them.
  10. The drone should be operable for at least an hour between recharging periods back at home.
  11. The drone should be able to fly.
  12. (Optional, if the drone should guide a biker) The drone should be able to maintain speeds of 10m/s.
  13. The drone should not weigh more than 4 kilograms.



Human factors

Drones are finding more and more applications around our globe and are becoming increasingly available and used on the mass market. In various applications of drones, an interaction with humans who might or might not be involved in the task that a drone carries out, is inevitable and sometimes even the core of the application. Even though drones are still widely perceived as dangerous or annoying, there is a common belief that they will get more socially accepted over time [5]. However, since the technology and therefore the research on human-drone interaction is still very new, our technology should incorporate as many human factors as deemed necessary, without assuming general social acceptance of drones.

The next sections will focus on different human factors that will influence our drone’s design with different goals. This will include the drone’s physical appearance and its users’ comfort with it, safety with respect to its physical design, as well as functionality-affecting factors which might contribute to a human's ability to follow the drone. Additionally, factors contributing to a satisfying overall experience will be considered.

Physical appearance

Here, the close physical appearance of the drone and its users affect for it will be discussed. Size: Majority in studies for medium size drone (around 40cm diameter) [6] Shape: Round features

Safety

The safety section will cover topics like the minimum distance it should keep to its user and eventually physical design guidelines to be able for users to handle the drone safely.

Salience in traffic

As our standard use case described, the drone is aimed mostly at application in traffic. It should be able to safely navigate its user to his destination, no matter how many other vehicles, pedestrians or further distractions are around. A user should never get the feeling to be lost while being guided by our drone.

To reach this requirement, the most direct solution is constant visibility of the drone. Since human attention is easily distracted, also conspicuity, which describes the property of getting detected or noticed, is an important factor for users to find the drone quickly and conveniently when lost out of sight for a brief moment. However, the conspicuity of objects is perceived similarly by (almost) every human brain, which introduces the problem of unwillingly distracting other traffic participants with an overly conspicuous drone. We will focus on two factors of salience and conspicuity:

  • Color

The color characteristics of the drone can be a leading factor in increasing the overall visibility and conspicuity of the drone. The more salient the color scheme of the drone proves to be, the easier it will be for its user to detect it. Since the coloring of the drone alone would not emit any light itself, we assume that this design decision does not highly influence the distraction factor for other traffic participants.

Choosing a color does seem like a difficult step in a traffic environment, where many colors have meanings that many humans take for granted. We would not want the drone to be confused with any traffic lights or street signs, since that would lead to serious hazards. But we would still need to choose a color that is perceived as salient as possible. Stephen S. Solomon conducted a study about the colors of emergency vehicles [7]. And the results of the study were based upon what was found out about the human visual system: It is most sensitive to a specific band of colors, which involves ‘lime-yellow’. Therefore, as the study showed, lime-yellow emergency vehicles were involved in less traffic accidents, which does indeed let us draw conclusions about the conspicuity of the color. This leads us to our consideration for lime-yellow as base color for the drone. Furthermore, color contrasts are going to be discussed here.

  • Luminosity

The luminosity section will treat the application of reflectors and lights on the drone, maximising visibility but minimising unwilling conspicuity for other road users.

Positioning in the visual field

The positioning of the drone will be as valuable for a user as it will be a challenge to correctly derive. The drone should not deviate too much from its usual height and position within its users attentional field, however, it might have to avoid obstacles, wait and make turns without confusing the user. Findings so far:

  • Smooth movements (planned trajectories)
  • Horizontal deviation better than vertical deviation [8]


User satisfaction and experience design

A user should feel comfortable using this technology. This section will treat how this could be achieved and how a user’s satisfaction with the experience could be increased.

Legal Issues

In this project, a flying drone is designed to move autonomously through urban environments to guide a person to their destination. It is important however to first look at relevant legal issues. In the Netherlands, laws regarding drones are not formulated in a clear way. There are two sets of laws: recreational-use laws and business-use laws. It is not explicitly clear which set of laws applies to this project if any at all. The drone is not entirely intended for recreational use because of its clear necessity to the targeted user group. On the other hand, it does not fall under business use either it is not “used by a company to make money”---this does not include selling it to users. In that case, it is in the users’ ownership and is no longer considered used by the company. If the drone is rented, however, it still might fall under business use. In conclusion, neither set of laws applies to our project. Since drones are not typically employed in society, this is not unexpected and we might expect new laws to adapt to cases such as ours.

According to law, drone users are not allowed to pilot drones above residential areas regardless of their use. Our drone, however, flies through residential areas for its intended purpose, not above them.

Legislation is subject to change that can be in accordance with our project as well as against it. That being said, we can safely design our drone as intended without worrying about legislation. Our design does not explicitly violate any laws.

Technical considerations

Battery life

One thing to take into consideration while developing a drone is the operating duration. Most commercially available drones can not fly longer than 30 minutes [9],[10]. This is not a problem for a walk to the supermarket around the block, but to commute for example to work longer battery life would be preferred. Furthermore wind and rain have a negative influence on the flight time of the drone but the drone should still be usable during these situations so it is important to improve battery life.

In order to keep the battery life as long as possible, a few measures could be taken. First of all a larger battery could be used. This however makes the drone heavier and thus also would require more power. Practical energy density of a lithium-polymer battery is 150Wh/kg [11]. However if the battery is discharged completely it will degrade, decreasing its lifespan. Therefore the battery should not be drained for more than 80% meaning that the usable energy density is about 120Wh/kg.

Another way to improve flight time is to keep spare battery packs. It could be an option in this project to have the user bring a second battery pack with them for the trip back. For this purpose the drone should go back to the user when the battery is nearly low and land. The user should then pick the drone up and swap the batteries. This would require the batteries to be easily (dis)connectable from the drone. A possible downside to this option is that the drone would temporarily shut down and might need some time to start back up after the new battery is inserted. This could be circumvented by using a small extra battery in the drone that is only used for the controller hardware.

For this project first it is researched whether a continuous flight of around 60 minutes is feasible. If this is not possible it is chosen to use the battery swapping alternative. Unfortunately no conclusive scientific research is found about the energy consumption of drones so instead existing commercially available drones are investigated. In particular the Blade Chroma Quadcopter Drone [12] is researched. It weighs 1.3kg and has a flight time of 30 minutes. It uses 4 brushless motors and has a 11.1V 6300mAh LiPo battery. The amount of energy can be calculated with [math]\displaystyle{ E[Wh]=U[V]\cdotC[Ah] }[/math] which gives about 70Wh. The battery weighs about 480g [13] so this seems about right with previously found energy density. The drone has a GPS system, a 4K 60FPS camera with gimball and a video link system. The high-end camera will be swapped for a lighter simpler camera that uses less energy since the user tracking and obstacle avoidance work fine with that. The video link system will also not be used. The drone will only have to communicate simple commands to the user interface. This does spare some battery usage but on the other hand a computer board will be needed that runs the user tracking, obstacle avoidance and path finding. For now it is assumed that the energy usage remains the same. Unfortunately the flight time of 30 minutes is calculated for ideal circumstances and without camera. The camera would decrease the flight time by about 7 minutes . For the influence of weather more research is needed but for now it is assumed that the practical flight time is 15-20 minutes.

If a flight time of 60 minutes is required that would mean that a battery at least 3 times as strong is needed. However since these battery packs weigh 480g, that would increase the drone weight almost by a factor of 2. This would in itself require so much more power that even more battery and motor power is required. Therefore it can be reasonably assumed that this is not a desirable option. Instead the user should bring 2 or 3 extra battery packs to swap these during longer trips.

It is however still possible to design a drone that has sufficient flight time on a single battery. Impossible aerospace claims to have designed a drone that has a flight time of 78minutes whit a payload [14]. To make something similar a large battery pack and stronger motors would be needed.

Propellers and motors

To have a starting point which propellers and motors to use, the weight of the drone is assumed. Two cases are investigated. One is where the drone has flight time of 15-20 minutes and its battery needs to be swapped during the flight. In this case the drone is assumed to have a weight of approximately 1.5kg which is slightly heavier than standard for commercially available long flight time drones. The other case is a drone that is designed to fly uninterupted for one hour. The weight for this drone is assumed to be 4kg, the maximum for recreational drones in the Netherlands.

Multi charge drone with interchangeable batteries

With a weight of 1.5kg the thrust of the drone would at least have to be 15N. However, with this thrust the drone would only be able to hover and not actually fly. Several fora and articles on the internet state that for regular flying (no racing and acrobatics) at least a thrust twice as much as the weight is required (e.g. [15] and [16]) so the thrust of the drone needs to be 30N or higher. If four motors and propellers are used, this comes down to 7.5N per motor-propeller pair.

APC propellers has a database with the performance of all of their propellers [17] which will be used to get an idea of what kind propeller will be used. There are way to many propellers to compare individually so as starting point a propeller diameter of around the 10" is used (the propeller diameter for the perviously discussed Blade Chroma Quadcopter) and the propeller with the lowest required torque at a static thrust (thrust when the drone does not move) of 7.5N or 1.68lbf is searched. This way the 11x4 propeller is found. It has the required thrust at around 6100RPM and requires a torque of approximately 1.03in-lbf or 11.6mNm.

With the required torque and rotational velocity known a suiting motor can be chosen.

User Interface Design

The user interacts with the drone via multiple interfaces. Here we list the specific design elements and dynamics of each of these interfaces.

  1. A Natural Language User Interface (NLUI) to answer questions, make recommendations on desired destinations, take permission to change route mid flight, and similar speech-based interactions.
  2. A Graphical User Interface displayed through a web page that provides enter or change the destination and current location, add favorite locations for quick access. Allows user to change the altitude of the drone, stop and start the drone. Search bar: search for place or address, icons buttons that say food and drink, shopping, fun, and travel. Pressing food and drink shows a list of restaurants and bars and cafes with yelp reviews. Pressing travel shows gas stations, landmarks, airports, bus stations, train stations, hotels. Pressing fun shows cinemas and other entertaining places. Favorites show frequently used addresses.
  3. A Motion User Interface. Can interpret motion gestures.

Distance Estimation

An integral part of the operation of a drone is distance computation and estimation.

Distance estimation diagram.png

Since a camera can be considered to be a part of a drone, we present a formula for distance computation, given some parameters. The only assumption made is that the type of lens is rectilinear. The explained formula does not hold for other types of lenses.

[math]\displaystyle{ H_{obj} = D \cdot \frac{ h_{obj}(px)}{h_{sensor}(px)} \cdot V_{FOV}(radians) }[/math]

The parameters

  1. [math]\displaystyle{ H_{obj} }[/math] : The (real-world) height of the object or user in a metric system.
  2. [math]\displaystyle{ D }[/math] : The distance between the lens on the drone and an object or user in a metric system.
  3. [math]\displaystyle{ h_{obj}(px) }[/math] : The height of the object or user in pixels.
  4. [math]\displaystyle{ h_{sensor}(px) }[/math] : The pixel-height of the sensor of the camera. This can be computed in terms of the sensor’s pixel-size (which should be present in the specification of the used lens) and resolution of the digital image (which should easily be retrievable) [18].
  5. [math]\displaystyle{ V_{FOV}(radians) }[/math] : The vertical field of view of the lens. This is denoted by [math]\displaystyle{ \alpha }[/math] in the image above, and is either in the specification of the used lens, or can be computed using [math]\displaystyle{ f }[/math], the focal length and sensor size which both must be in said specification. It possibly needs a conversion to radians afterwards.

Rewriting the equation for [math]\displaystyle{ D }[/math], the distance gives the following.

[math]\displaystyle{ D = \frac{ H_{obj} }{ \frac{ h_{obj}(px)}{h_{sensor}(px)} \cdot V_{FOV}(radians) } }[/math]

Obstacle avoidance

In order for a drone to navigate effectively through an urban environment, it must circumvent various obstacles that such an environment entails. To name some examples: traffic lights, trees and tall vehicles may form an obstruction for the drone to follow its route. To solve this problem, we will apply a computationally simple method utilizing a potential field [19].

The goal of this method is to continuously adjust the drone’s flightpath as it moves towards a target, so that it never runs in to any obstacles. For this subproblem, we assume the position and velocity of the drone, target and obstacles are known.

The potential field is constructed using attractive and repulsive potential equations, which pull the drone towards the target and push it away from obstacles. The attractive and repulsive potential fields can be summed together, to produce a field guides the drone past multiple obstacles and towards the target.

We consider potential forces to work in the x, y and z dimensions. To determine the drone’s velocity based on the attractive and repulsive potentials, we use the following functions:

[math]\displaystyle{ p_d^{att}(q_d, p_d) = \lambda_1 d(q_d, q_t) + p_t + \lambda_2 v(p_d, p_t)\\ p_d^{rep}(q_d, p_d) = -\eta_1 \dfrac{1}{d^3(q_o, q_d)} - \eta_2 v(p_o, p_d) }[/math]

where [math]\displaystyle{ \lambda_1, \lambda_2, \eta_1, \eta_2 }[/math] are positive scale factors, [math]\displaystyle{ d(q_d, q_t) }[/math] is the distance between the drone and the target and [math]\displaystyle{ v(p_d, p_t) }[/math] is the relative velocity of the drone and the target. Similarly, distance and velocity of an obstacle [math]\displaystyle{ o }[/math] are used.

There may be multiple obstacles and each one has its own potential field. To determine the velocity of the drone, we sum all attractive and repulsive velocities together:

[math]\displaystyle{ p_d(q_d, p_d) = p_d^{att} + \sum_o p_d^{rep} }[/math]

User Tracking

It should be clear that tracking the user is a large part of the software for the Follow-Me drone. We present Python code (will be updated at the end of the project) that can be used with a webcam as well as normal video files, which can use various tracking algorithms.

Tracker Comparisons

Here we give a (short) overview of the different trackers used and their performance with respect to obstacles and visibility. The videos that were used were taken from pyimagesearch. The overview will be on a video-basis, that is, we discuss different trackers in terms of each video used.

Initial comparison --- american_pharoah.mp4

This video is from a horse race. For each tracker we select the horse in first position at the start of the video as object to be tracked. During the video, the horse racers take a turn, making the camera perspective change. There are also small obstacles, which are white poles at the side of the horse racing track.

  • BOOSTING tracker: The BOOSTING tracker is fast enough, but cannot deal with obstacles. The moment that there is a white pole in front of the object to be tracked, the BOOSTING tracker fatally loses track of its target. This tracker cannot be used to keep track of the target when there are obstacles. It can, however, be used in parallel with another tracker, sending a signal that the drone is no longer in line of sight with the user.
  • MIL tracker: The MIL tracker, standing for Multiple Instance Learning, uses a similar idea as the BOOSTING tracker, but implements it differently. Surprisingly, the MIL tracker manages to keep track of the target where BOOSTING fails. It is fairly accurate, but does not run fast with a measly 5 FPS average.
  • KCF tracker: The KCF tracker, standing for Kernelized Correlation Filters, builds on the idea behind BOOSTING and MIL. It reports tracking failure better than BOOSTING and MIL, but still cannot recover from full occlusion. As for speed, KCF runs fast enough at around 30 FPS.
  • TLD tracker: The TLD tracker, standing for tracking, learning and detection, uses a completely different approach to the previous three. Initial research showed that this would be well-performing, however, the amount of false positives is too high to use TLD in practice. To add to the negatives, TLD runs the slowest of the up to this point tested trackers with 2 to 4 FPS.
  • MedianFlow tracker: The MedianFlow tracker tracks the target in both forward and backward directions in time and measures the discrepancies between these two trajectories. Due to the way the tracker works internally, it follows that it cannot handle occlusion properly, which can be seen when using this tracker on this video. Similarly to the KCF tracker, the moment that there is slight occlusion, it fails to detect and continues to fail. A positive point of the MedianFlow tracker when compared with KCF is that its tracking failure reporting is better.
  • MOSSE tracker: The MOSSE tracker, standing for Minimum Output Sum of Squared Error, is a relative new tracker. It is less complex than previously discussed trackers and runs a considerable amount faster than the other trackers at a minimum of 450 FPS. The MOSSE tracker also can easily handle occlusion, and be paused and resumed without problems.
  • CSRT tracker: Finally, the CSRT tracker, standing for Discriminative Correlation Filter with Channel and Spatial Reliability (which thus is DCF-CSRT), is, similar to MOSSE, a relative new algorithm for tracking. It cannot handle occlusion and cannot recover. Furthermore, it seems that CSRT gives false positives after it lost track of the target, as it tries to recover but fails to do so.

At this point it has been decided that only the MIL, TLD and MOSSE trackers can be used for actual tracking purposes. For the next video, only these trackers were compared as a final comparison, even though it should be clear that MOSSE is the best one for tracking a user.

Final comparison --- dashcam_boston.mp4

This video is taken from a dashcam in a car, in snowy conditions. The car starts off behind a traffic light, then accelerates and takes a turn. The object to track has been selected to be the car in front.

  • MIL tracker: Starts off tracking correctly. Runs slow (4-5 FPS). Does not care about the fact that there is snow (visual impairment) or the fact that the camera angle is constantly changing in the turn. Can perfectly deal with the minimal obstacles occuring in the video.
  • TLD tracker: It runs both slower and inferior to MIL. There are many false positives. Even a few snowflakes were sometimes selected as object-to-track, making TLD impossible to use as tracker in our use case.
  • MOSSE tracker: Unsurprisingly, the MOSSE tracker runs at full speed and can track without problems. It does, however, make the bounding box slightly larger than initially indicated. We do not believe this to be a problem.

Tracker conclusion

It is clear that for our tested cases the MOSSE tracker is the superior tracker for the purpose of tracking a user. On the remaining videos, which are drone.mp4, nascar_01.mp4, nascar_02.mp4 and race.mp4, the MOSSE tracker can pretty much track our selection without problems. It should be noted that when a race car is driving at high speeds, and the camera pans quickly, that MOSSE might make the bounding box larger than should be.

Another caveat that occurs when testing trackers is that ‘’any’’ tracker has difficulty to track one of two similar targets.


Line of Sight

It is important for the drone to stay in line of sight of the user. We need to detect when this is no longer the case. Instead of designing a novel algorithm, we can use one of the trackers discussed in the initial tracking comparison that cannot handle occlusion and is good at failure reporting. There are a few options that we can choose from, namely, the BOOSTING tracker, KCF tracker and MedianFlow tracker. The first two use the same idea, but KCF is better than BOOSTING when comparing the trackers using the videos we have. When comparing KCF with MedianFlow and doing more research, it shows that MedianFlow is better at reporting tracking failure.

Simulation

Conclusion