PRE2016 3 Groep16: Difference between revisions

From Control Systems Technology Group
Jump to navigation Jump to search
No edit summary
No edit summary
Line 54: Line 54:
- Program the drone and tune the sensor (e.g. find the treshold voltages) to detect the different values.
- Program the drone and tune the sensor (e.g. find the treshold voltages) to detect the different values.
- link the obtained data to an environmental structure (e.g. environment heat model).  
- link the obtained data to an environmental structure (e.g. environment heat model).  
- adjust the program in order to map properly the perimeter and consider the external heat deviation. \n
- adjust the program in order to map properly the perimeter and consider the external heat deviation.
- Act on the environment under inspection (e.g. transmitting signal to operator).
- Act on the environment under inspection (e.g. transmitting signal to operator).

Revision as of 14:34, 9 February 2017

Contents

Group members

Student ID Name
09 M.D Visser
09 G. Marzano
09 R. Schalk
09 T. Jansen
09 J. Van Galen
09 B.G.M Hopman

Introduction

Project: Robots everywhere (0LAUK0)

Subject: Detection of people by using drones equipped with IR and heat sensors.

Applications: - Finding refugees in the sea
              - local security and criminals detection

Objectives:

general: - showing that drones can be implemented in substitution of regular surveillance           vehicles/cameras, consequently reducing costs and risks for operators.

(PUR - Principle of Unnecessary Risk)

- autonomous motion (User)

1: - Reducing costs for refugee search in open sea (Society) - Increase relative number of rescued refugees (Society)

2: - reduce crime numbers (Society) - have a better understanding of crime distribution (Society) - make surveillance cheaper and more efficient (Enterprise & Society)


APPROACH - Equip the drone with IR sensor & camera. (Drone given) - Program the drone and tune the sensor (e.g. find the treshold voltages) to detect the different values. - link the obtained data to an environmental structure (e.g. environment heat model). - adjust the program in order to map properly the perimeter and consider the external heat deviation. - Act on the environment under inspection (e.g. transmitting signal to operator).