Mobile Robot Control 2021 Group 1
From Control Systems Technology Group
TUe\20172912 (Talk  contribs) 
TUe\20172912 (Talk  contribs) 

(5 intermediate revisions not shown)  
Line 142:  Line 142:  
'''The Kalman Filter''' <br>  '''The Kalman Filter''' <br>  
The Kalman filter can be split into 4 parts: initialization, prediction, measurement, and update. As can be seen in the figure.  The Kalman filter can be split into 4 parts: initialization, prediction, measurement, and update. As can be seen in the figure.  
  [[File:KalmanSchedule.png800pxcenter Figure  +  [[File:KalmanSchedule.png800pxcenter Figure: Schematic representation of the Kalman filter.]] 
'''Initialization''' <br>  '''Initialization''' <br>  
  In the initialization step, the initial configuration of PICO  +  In the initialization step, the initial configuration and covariance of PICO are given to the Kalman filter. It is of high importance that the initial configuration and covariance is accurately estimated, since it is the foundation for the following steps. There will be an intial starting area given for the competition. Thus, the LiDAR data will be fitted for this area to find the intial configuration of PICO. <br> 
'''Prediction''' <br>  '''Prediction''' <br>  
  In the prediction step, the data obtained from the previous iteration and the data from the odometry are used to predict the new data. The odometry data is obtained by... <br>  +  In the prediction step, the data obtained from the previous iteration and the data from the odometry are used to predict the new data. The data is described in terms of a reference frame, which is frame O in the figure below. The data measured with the odometry is the configuration of frame 1 with respect to frame 0. This data can be transformed to the configuration of frame 1 with respect to frame O. <br> 
+  [[File:ReferenceFrame.png300pxcenter Figure: Reference Frame]]  
+  The predicted configuration is obtained by adding up the configuration of the previous iteration and the transformed odometry data. As can be seen in the equations: <br>  
+  [[File:OdomData1.PNG300pxOdometry data equation 1]]<br>  
+  The predicted covariance is obtained with the previous covariance, the odometry covariance, the configuration change between the two iterations described in the reference frame O. The odometry covariance is retrieved by calculating the covariance of the movement forward, movement sideways, and the turn. <br>  
+  [[File:OdomData2.PNG400pxOdometry data equation 1]] <br>  
+  
'''Measurement''' <br>  '''Measurement''' <br>  
In the measurement step, the data obtained from the LRF sensors are fitted on the map to determine the configuration and standard deviation. This is done by... <br>  In the measurement step, the data obtained from the LRF sensors are fitted on the map to determine the configuration and standard deviation. This is done by... <br> 
Current revision as of 15:47, 26 May 2021
Contents 
Members
 Véronne Reinders (v.reinders@student.tue.nl)  1706837
 Danique van Berlo (d.y.b.m.v.berlo@student.tue.nl)  1242645
 Tim van de Ven (n.c.m.v.d.ven@student.tue.nl)  0948317
 Daan Roordink (d.roordink@student.tue.nl)  0863456
 YuHsin Wu (y.h.wu@student.tue.nl)  1623141
 Mike van Duijnhoven (m.p.j.v.duijnhoven@student.tue.nl)  1510266
Planning
Week  Deadlines  Done before weekly meeting 1  Done before weekly meeting 2 

1 (19/0425/04)  
2 (26/0402/05)  Read the wiki page carefully  First draft of the design document  
3 (03/0509/05)  04/05  Design Document  Adjust the design document and have all software working  Finalize the design document and first draft of strategy for the escape room 
4 (10/0516/05)  12/05  Escape room competition  Finalize the strategy for the escape room  Work on two parts of the hospital strategy:

5 (17/0523/05)  Work on parts of the hospital strategy:
 Work on parts of the hospital strategy:
 
6 (24/0530/05)  Work on parts of the hospital strategy:
 Work on parts of the hospital strategy:
 
7 (31/0506/05)  02/06  Presentation  Adjust the strategy for the final competition  Adjust the strategy for the final competition 
8 (07/0613/05)  09/06  Final competition  Finalize the strategy for the final competition  Debrief the competition for recommendations for future work 
9 (14/0620/05)  Adjust the wiki page where needed  Finalize the wiki page  
10 (21/0627/05)  23/06  Wiki page 
Design Document
The design document can be found here and contains our interpretation of the requirements, functions, components, specifications and interfaces for both the escape room and hospital challenge.
Escape room competition
Strategy
In the escape room competition, PICO will first simply drive forward until PICO finds a wall. When PICO is at a certain distance from the wall, it will start to turn until the wall is on its right side and parallel to its driving direction. Afterward, PICO will follow the wall and the following corners. This will go on until PICO passes the finish.
Software implementation
state: intialization named "init" PICO will continuously check if it is close to a wall.
 If PICO is close to a wall, the state will change to "followWall".
 Otherwise, PICO will drive forward.
state: follow the wall named "followWall" PICO will update its detected distance from the wall continuously. Meanwhile, updating PICO moves according to its distance from the wall
 If PICO his detected distance from the wall is too far, PICO will rotate towards the wall.
 If PICO his detected disctance from the wall is too close, PICO will rotate from teh wall.
 If PICO encounters a convex corner, the state will change to "driveInto".
 If PICO encounters a concave corner??, the state will change to "turn".
 Otherwise, PICO will drive forward.
state: turning 45 degrees named "turn" The angle with respect to the start of the turn is measured.
 If the angle is smaller than 45 degrees, PICO will rotate.
 Otherwise, the state will change to "followWall"
state: passing the convex corner "driveInto" The x, y distance and angle with respect to the start of the state is measured.
 If the measured total distance w.r.t. to the start of the state is smaller than 0.5m, PICO will drive forward.
 If the measured angle is smaller than 90 degrees, PICO will rotate.
 Otherwise, the state will change to "followWall"
Use cases
To make sure PICO will perform as expected during the competition, a couple of use cases are made to test its performance. The use cases are several different maps and different configurations within those maps. In these maps the environment specifications, such as crooked corners and walls but also a very small room or very large room, are incorporated as good as possible. The image name, the word thumb then the caption :
Hospital competition
For the Hospital competition, the basic information flow diagram is shown in Figure 3. Starting from the input of the LRF data, the data is transformed using several functions. After obtaining the world model, the starting map can be initialized. Then, path planning can start. In order to do so, a weighted map has to be generated first. Then, by using the current position and goal positions, the (current) optimal path can be generated. This path can then be used by the drive controller to move the robot. By using a 20Hz iteration procedure, the optimal path can be updated according to new findings, such as closed doors or moving objects.
Obtaining the point cloud
After the computation of the point cloud, the algorithm introduced by Peter et al. (Figure 4) was used to translate this point cloud into a line segmentation.
Finding the line segments
The world model approach is based on research by Peter et al. (2017) was used. Peter et al. map 2D laser input to line segmentation based on a range of residuals. To use this approach, it was necessary to compute the point cloud from the 1000 laser beams retrieved from the LRF. Computation was done based on the following formula:
Finding the current position
The Kalman Filter
The Kalman filter can be split into 4 parts: initialization, prediction, measurement, and update. As can be seen in the figure.
Initialization
In the initialization step, the initial configuration and covariance of PICO are given to the Kalman filter. It is of high importance that the initial configuration and covariance is accurately estimated, since it is the foundation for the following steps. There will be an intial starting area given for the competition. Thus, the LiDAR data will be fitted for this area to find the intial configuration of PICO.
Prediction
In the prediction step, the data obtained from the previous iteration and the data from the odometry are used to predict the new data. The data is described in terms of a reference frame, which is frame O in the figure below. The data measured with the odometry is the configuration of frame 1 with respect to frame 0. This data can be transformed to the configuration of frame 1 with respect to frame O.
The predicted configuration is obtained by adding up the configuration of the previous iteration and the transformed odometry data. As can be seen in the equations:
The predicted covariance is obtained with the previous covariance, the odometry covariance, the configuration change between the two iterations described in the reference frame O. The odometry covariance is retrieved by calculating the covariance of the movement forward, movement sideways, and the turn.
Measurement
In the measurement step, the data obtained from the LRF sensors are fitted on the map to determine the configuration and standard deviation. This is done by...
Update
In the update step, the data of both the predition step and the measurement step are weighted to determine the actual configuration.
Generating the world model
Initializing the static map
Formulating the weighted map
In order to formulate the weighted map, a gridmap had to be specified first. This was done by using the provided static map. By finding the given maximum and minimum coordinates, a good estimate of the size of the map can be formulated. Then, a grid based on these coordinates can be given. In example, when the provided JSON static map coordinates are (x,y) = (5,6) meters, and the minumum is (x,y) = (1,2) meters. Then the total grid size is (6,8) meters. Then, by dividing this with the wanted grid size (e.g. 0.1 meters), a grid can be obtained. This grid was formulated in a matrix, with size: (xmaxxmin/0.1,ymaxymin/0.1), given 0.1x0.1 meter grid boxes.
With this grid matrix, weights can be imported and updated using LRF measurement data by using an
Path Planning
We are dealing with a motion planning problem where the goal is to compute a path between the starting point and the goal. We can solve a lowdimensional problem by overlaying a grid on the world model. Within this grid, we can identify which grid points are walls or are within a certain distance from the wall, with a minimum of PICO’s height (given that it has one, because of the holonomic drivetrain, PICO can maneuver sideways). All the other free space can be considered for finding the shortest path with A*. This grid is also known as a weighted map. A* uses a heuristic to guide itself, just like greedy bestfirstsearch. A* examines the path that has the lowest f(n) = g(n) + h(n). Where g(n) is the exact cost (like for the Dijkstra’s algorithm) from starting point to any vertex n. h(n) is the heuristic estimated cost from that vertex n to the goal node. The heuristic can be calculated in different ways: Manhattan distance, diagonal distance, and Euclidean distance. Since PICO is allowed to/can move in every direction we will be using the Euclidean distance to calculate the heuristic for the hospital challenge. The edges of the graph will be the distance between two vertices. Because A* works in such a way that it makes a decision every step of the way, PICO can move forward with these decisions. This helps because closed doors or dynamic objects will be detected and can then be added to the weighted map and we can compute the next shortest path from there.
The drive control
Meeting Notes
26/04/2021
Get requirements from the Wiki and the slides. Components are in the slides as well.
30/04/2021
Include meeting notes on Wiki.
The Wiki will be the final report. So if you update it weekly with the progress and findings it will save us a lot of time in the end.
Final: complete description of the system, role division, etc.
General availability: Tuesday and Thursday
Action Points
 Find a weekly meeting moment  Tuesday 9.00 (tutor meeting from 10.00) & Friday 13.30
 Make a general planning: Danique
 Finish the design document  Everyone  Deadline Monday 22.00
04/05/2021
Action Points
 Finish the design document: Mike, Daan and Tim
 Review the design document and upload it on the wiki before 16.55: Daan
 Individually start on the programming and get familiar with the code before Friday: Everyone
 Select the best working code on Friday and split up the work from there on
07/05/2021
From now on meetings will be with an agenda and in between SSAs will be made. To find the specifics of the meeting read the notes on the drive.
Action Points
 Work on the dumb approach: Mike, Danique, Yu Hsin
 Work on the word model (approach): Daan, Tim, Veronne
 Upload a SSA template: Tim
 Make a git ignore: Daan
11/05/2021
Action Points
 Finish the wallfollowing approach: Mike, Danique, Yu Hsin
 Look into best approach for localization: Mike, Danique, Yu Hsin
 Work on the word model (approach): Daan, Tim, Veronne
14/05/2021
We did quite well in the escape room competition, by escaping in 44 seconds. However, some implementation of communication from PICO is missing such as SLAM or sound.
Action Points
 Determine a strategy: Tim
 Decide on a pathfinding method: Veronne
 Work on the visualization: Yu Hsin
 Work on extended Kalman filter for localization: Mike and Danique
 PICO detects line the line segments: Mike and Daan
18/05/2021
There are some uncertainties about the doors in the map and if A* can deal with all dynamic objects.
Action Points
 Work on the pathfinding method: Tim and Veronne
 Finish the visualization: Yu Hsin
 Work on the extended Kalman filter: Daan, Mike and Danique
21/05/2021
There are some uncertainties about the doors in the map and if A* can deal with all dynamic objects.
Action Points
 Work on the pathfinding method: Tim and Veronne
 Add obstacles to the visualization: Yu Hsin
 Work on the localization: Daan, Mike and Danique
25/05/2021
There are some uncertainties about the doors in the map and if A* can deal with all dynamic objects.
Action Points
 Work on the pathfinding method: Tim and Veronne
 Look into the path following method: Tim
 Work on the interaction with the cabinets: Yu Hsin
 Work on the Localization: Daan, Mike and Danique
 Make the presentation: Tim and Danique