Mobile Robot Control 2020 Group 3

From Control Systems Technology Group
Jump to navigation Jump to search

Team members:

M.N. de Boer (Martijn)

G.J.L. Creugers (Gijs)

P. Leonavicius (Pijus)

S. Narla (Shashank)

A.L. Nooren (Anna Lisa)

M.K. Salahuddin (Mohamed Kaleemuddin)




Design Document:

Requirements:

The following requirements regarding task performance, safety and software should be satisfied by the simulated PICO robot:

  • Task performance
    • The robot must be able to recognize target cabinets
    • The robot is capable of planning a path and is able to adapt to unexpected circumstances, for instance a closed door.
    • PICO can rotate in place, in order to re-position when in front of a cabinet
    • Must be able to announce the completion of the current objective
    • The robot should not be inactive for more than 25 seconds.
    • The robot has to be able to detect static and dynamic object and present them in the world model.
  • Safety
    • The robot avoids bumping into walls and doors
    • The robot avoids collisions with static and dynamic obstacles
    • PICO must obey the limits on translation and rotation velocity
    • PICO should maintain a 5cm Stopping distance from the obstacle.
  • Software
    • The software is started by a single executable
    • The software can be easily updated .
    • The User-interaction should be minimal and User-friendly.

Functions:

Input data processing

  • Laser range finder interpretation
Inputs: distance and angle from LaserData Interpreting data generated by the laser range finder, using a 2D SLAM algorithm.
  • Odometer interpretation
Inputs: OdometryData Calculates speed of the mobile robot integrating position values, relays the data to the SLAM algorithm.
  • Sensor Fusion
Combining sensory information from multiple sensors can have uncertainty.This module can help to have reliable information flow to correlate and deconstruct data.
  • Vector map data interpretation
A function used for structuring data obtained from the provided map of the testing area. To be used as

inputs for position estimation and path planning functions.

Mapping world model

  • Surroundings detection:
Comparing the expected surroundings based on the vector map and the output of the LRF interpretation function.
  • Obstacle recognition:
Given the found surroundings, the robot has to decide whether the surrounding are known walls or unknown obstacles as mark them accordingly.
  • Position estimation:
Comparing the expected surroundings using the provided vector map and the outputs of the LRF and odometry interpretation functions.

Control

  • Path planning:
A function based on a Dijkstra’s/ A* / Dynamic programming algorithm. Uses data from the provided vector map and outputs from LRF and odometry interpretation functions. Constantly recalculates the optimal path based on detected obstacles or changes in the environment such as closed doors.
  • Movement functions:
Used for describing routines to be sent as inputs for the base controller of the robot.
  • Final re-positioning:
After the objective position is reached, the rotation of the robot is compared to the required value obtained from the vector map data.
  • Signaling function:
A print output marking the completion of an objective: called once the final state of the path planning algorithm is reached and the correct orientation of the robot is achieved.
  • Safety function:
Constantly running in the background (as a separate process/thread) in order to detect anomalous behavior of the mobile robot and interrupt the operation of the robot if necessary.

Specifications:

  • Maintain a distance of 20cm between walls and PICO, stop and reroute if distance is less than 20cm
  • Maintain a distance of 80cm from any moving object
  • Move at a maximum speed of 0.3m/s while tracking a moving object
  • Move forward slightly, if robot has been standing stationary for 30s.
  • Maximum speed of 0.5m/s translational, 1.2rad/s rotational
  • Position PICO π rad with respect to the cabinet upon arrival
  • Visit the cabinets in the required order

Components:

Sensors

  • Laser range Finder
– Provides a set of points in polar coordinates relative to the PICO robot.
  • Wheel encoders
– With this distance translated and rotated can be measured, is however highly sensitive to noise and will require filtering.

Actuators

  • Holonomic base wheel
– It can realise the required degrees of freedom - translation in x and y and rotate about the z - axis without any position level constraints.

Computation unit

  • Containing the software module that drives the robot and lets all other components communicate

Interfaces:

Iiinterfaces.jpg

Design Document download:

Design Document pdf




Escaperoom challenge

For the escaperoom challenge a wall-following algorithm has been implemented. This algorithm consists of multiple phases, these phases are visualized in the schematic below. Interfacez.jpg

Phase 1:

Since the robot is not aware of its initial position first a wall has to be found before the actual wall following can happen. This is done by driving in a straight line until a wall is detected. When a wall has been found the software switches to phase 2.

Phase 2:

Now that a wall has been localized the next thing is to align the robot parallel to the wall. The estimation of the angular position is done by comparing a number of beams from the laser range finder. The robot will rotate until it is aligned in the right direction, than it will move to phase 3.

Phase 3:

In phase 3 the robot will drive along the wall while looking for the exit. In this phase two things can happen. First the robot might sense it is not aligned anymore and switch back to phase 2. This can happen because of drift, or because a corner has been found. The other option is that the exit has been found, in that case the robot switches to phase 4.

Phase 4:

Phase 4 takes care of aligning with the exit of the escape room. This means that that the robot will try to put the gap in the wall in its center. When this is done it will move to phase 5.

Phase 5:

In this phase the robot will move in a straight line trough the corridor until it reaches the end. To make sure it does not collide with the walls because of miss-alignment or drift a feedback loop has been implemented to keep the robot correctly oriented.

Phase 6:

When the robot reaches the end of the corridor it switches to phase 6 which will stop the movement to make sure it does not keep going to infinity and beyond.

Video of escape-room simulation:

click here for simulation video where the robot shows it's ability to escape the room.

GIF of escape room challenge:

Below is a gif of the actual escape room challenge where the robot failed to exit the escape room due to a minor imperfection in the software.

Escaperoom.gif




Hospital challenge

state machine

In the escape room challenge the Pico simulation environment has been explored in a relative simple fashion. The hospital challenge is obviously more advanced, but some modules can be adjusted and used again. A schematic visualization of the world model for the hospital challenge is shown below. The separate modules will be elaborated in the next paragraph.


Base map generation

Basemapgeneration.png

The pre-known layout of the hospital is given to the system in the form of a .json file. From this .json file features like walls, cabinets and points are extracted and converted in a map such that Pico can use this map to navigate and update the map on the go with new data. Below a visualization of the base map generation is shown:

Perception

Perception.png

Perception is a process where sensory data is interpreted and used to understand the presented information of the environment. In this case it is used to obtain the specific location in the room from the laser scanner data. The perception process is showed in [figure XX] and contains the implementation of a Split and Merge and Template Matching algorithm. After the Template Matching algorithm, a (x,y, theta) location on the map is send to the Kalman filter to compare the obtained location from the laser scanner data with the location from the odometry data. After this comparison, the output will be a (x,y,theta) location of the robot in the room. In the next sections the to be used Split and Merge and Template Matching algorithm are discussed.

Localization

The Localization of PICO is one of the most important problems to be solved in order navigate through different obstacles and complete the challenge. This is the most important module for the robot to uniquely identify itself inside the map with a certain position and orientation. Localization can be done in many ways

1.Dead-reckoning — a method that uses odometry data.

2.landmark positioning — finding the exact position by measuring the distance to obstacles in the environment.

3.sensor-based navigation — utilising a variety of range scanners to build a map of a visible area. Then it is compared with the global map to find the current position.

other methods — GPS or vision systems.

Since we did not have access to the map until a week before and we do not have GPS or vision system, we proposed to use a combination of 1 and 3.

The LRF data is used to extract valuable information along with the odometry data filtered using the kalman filter. To extact lines from the LRF data we planned to use Split and Merge algorithm and generate a local map of what the robot perceives around it. This map is then compared with the global map using template matching to get an estimate of the robot's position and orientation.

Template Matching

The template matching algorithm is a wide used technique to find areas of an image that match to a template image.

Kalman Filter

Kalmann.png

To merge the odometry data into position estimation a Kalman filter is implemented. The Kalman filter is a usual choice to filter the noisy signal from the odometry data that takes into account the uncertainty and gives close to accurate state measurements along with future predictions.Another benefit of the Kalman filter is that knowledge of a long state history is not necessary since the filter only relies on the immediate last state and a covariance matrix that defines the probability of the state being correct.

The Kalman filter depends extensively on linear algebra with it's prediction and update equations. C++ does not yet have a standard library to handle matrix operations as efficiently as MATLAB. Hence, to make the implementation easier, Armadillo [1] was used.The library can handle matrix operations through it's in-built classes.

Kalman filter.png

Since PICO robot is a linear system, the state space equations can be predicted easily. The noise covariance matrix and process covariance matrix can be initially set to a predefined value and it later converges to the correct value based on the Kalman gains.

Target formulation

Targetformulation2.png

Firstly the point data from the .json file is stored in a 2-by-n array, where n is the amount of points in the .json file. The location in the array notes which point it is. After that the Cabinet data is stored in a three dimensional m-by-4-by-2 array, where m is the amount of cabinets. The first dimension being the cabinet number, the second dimension being the wall number of the respective cabinet and the final dimension being the points of that respective wall. Thus each cabinet is a bundle of 4 combinations of points.

After constructing the cabinet and point arrays, the point values are translated into their global coordinates, creating a m-by-4-by-4 array. Here the third dimension changed from 2 to 4 since each point contains an x and y value.

To determine the midpoint of the whole cabinet, the means are taken from all the x coordinates and y coordinates of the cabinet array respectively.. This then results in a m-by-2 array, containing the x and y coordinates of the cabinet. In order to determine the midpoint of the front of the cabinet, the means of the coordinates are taken from only the first wall of the cabinet, since the first wall is always the front.

To determine the direction outwards of the cabinet, the x and y coordinates of the mid point of the cabinet are subtracted from the coordinates of the midpoint of the front and are then normalized. The inwards direction is simply the inverse of the outwards direction.

The x and y coordinates of each target location is then determined by translating from the front of the cabinet in the outwards direction with a predetermined length. This length is taken to be 0.5 meter, since the pico is about a meter wide and thus it can freely rotate after confirming it has done its objective at the cabinet. The inwards direction is converted to an angle in radians and stored as the third coordinate of the target. Ultimately a m-by-3 array is made containing the x, y and theta coordinates of each of the positions in front of and looking at the cabinet.

Path planning

During the course of this project several changes have happened to the way path planning was implemented. Firstly a separate C++ library for an A* algorithm was adapted (reference insert), unfortunately implementation issues with C++ and OpenCV (is this correct?) have stopped the group from using this algorithm. The choice was made to completely switch to using the ROS Navigation stack for all path planning purposes. The Navigation stack is an extensive collection of ROS packages meant to fully cover all path planning and obstacle avoidance problems.

test caption

The default algorithms for path planning were used: Dynamic Window Approach (DWA) as the local planner and Dijkstra´s algorithm as the global planner. An overview of these algorithms is provided below:

DWA is an algorithm which works in the velocity space, and optimizes for circular paths only. The algorithm uses known constraints of velocities and accelerations in order to calculate the appropriate path segment which will result in no collisions before the next recalculation is completed. An advantage of this algorithm is that it results in a slow movement when near obstacles or the final navigation goal, but a disadvantage is that only circular arcs are considered and in some cases this results in movements

reference for dwa: Fox, D.; Burgard, W.; Thrun, S. (1997). "The dynamic window approach to collision avoidance". IEEE Robotics & Automation Magazine.

Dijkstra´s algorithm is a classical solution and is easy to understand, it computes the shortest path by evaluating and updating costs to each adjacent grid point on the known global cost-map. A graphical representation of the algorithm is presented in (reference gif dijkstra). An important thing to note is that the global planner within the Navigation stack consists of two separate parts: the Dijkstrta´s or A* algorithm, which computes the shortest path and a ¨potential field¨ calculation, which adjusts the path in order to take into account the known obstacles along with the defined inflation radius. There is a reason why Dijkstra´s algorithm is recommended in maps, which are not too large: due to the way Dijkstra´s algorithm works, a much larger potential field is calculated, when compared to A*, which provides more data for gradient descent optimization of the original path, this in turn results in smoother global trajectories.




Ros stuff

One of the main challenges in this project was learning enough about the inner workings of the Robot Operating System in order to successfully implement the Navigation stack.

The original goal was to implement a scan matching algorithm paired with an extended Kalman filter to provide localization for Pico. Unfortunatelly this did not succeed and the choice was made to switch to the Adaptive Monte Carlo Localization package, which is an algorithm based on particle filters.

The starting area was known approximately, thus an initial pose estimate could be provided by choosing center of the start area as the inital coordinates. In order for localization to work suitable covariance values for x, y and theta coordinates (reference insert picture of covariance or something) had to be provided. This allowed Pico to localize pretty quickly and start moving towards the goal. Ther was only one issue with this approach: if the navigation goal was close to the starting area of Pico (for example cabinet number 0), the robot would get lost, as it believed the goal was already reached before completing the localization.

Recovery behaviour ROS Navigation stack incorporates two recovery behaviors: rotation in place and local cost-map clearing. Why? You will see that move_base will invoke these behaviors on three conditions: An oscillation was discovered, no global plan was received for some amount of time, or the local planner failed to find a valid velocity command for some amount of time.

Bugs Inflation radius and final target coordinates. If Pico gets a goal which is considered within the inflation radius, it will not be able to find a global path to the target and the robot will abort. In order to circumvent this a tolerance parameter can be adjusted within the global planner, but this proved to be only marginally successful.

Driving too close to the obstacles results in very tiny movements supplied by DWA, which then is registered as an oscillation by move_base and a command is given to start the recovery behaviours. There are two main ways to circumevent this- increasing the inflation radius and nflation radius and cost scaling factor are the parameters that determine the inflation. inflation radius controls how far away the zero cost point is from the obstacle. cost scaling factor is inversely proportional to the cost of a cell. Setting it higher will make the decay curve more steep. Dr. Pronobis sugggests the optimal costmap decay curve is one that has rel- atively low slope, so that the best path is as far as possible from the obstacles on each side (this is not to be left here)

The issue was that adjustments of the cost scaling factor resulted in very minimal changes in trajectory and at the same time the inflation radius could not be increased, as that resulted in many final goal positions to be placed within the no-go zone.

Add costmap description, parameters, layer descriptions.


ros structure

ros frames

Code snippets

References

Hospital Challenge Demo

click here for simulation video where the robot shows it's ability to Navigate the hospital environment.