Integration Project Systems and Control 2013 Group 2

From Control Systems Technology Group
Jump to navigation Jump to search

Group Members

Name: Student id: Email:
Rens Samplonius 0785119 r.j.samplonius@student.tue.nl
Frank Evers 0789890 f.evers@student.tue.nl
Juan Guo 0825223 j.guo@student.tue.nl
Jeroen Lamers 0771264 j.w.lamers@student.tue.nl

Planning

Planning.jpg

Progress

Week 1

  • List of what you have done and learned
  • ...

Week 2

  • Rens and Jeroen conducted an FRF measurement on the left pizza robot. They did a closed loop measurement on each axis by applying a sin-wave + white noise to the plant. The sine wave is added to overcome the massive friction. The controller used in the closed loop measurement is tuned very low. During the FRF measurement the following data is collected: the input signal (u), the white noise signal (w), and the output voltages (v). With this data we calculated the process sensitivity and the sensitivity and to obtain the plant we divided them (similar as we did during the Motion Control course). We are uncertain if the left and right pizza robots have a similar plant so perhaps we should repeat the FRF measurement on the right robot because that one has the pizza racks on it.