Embedded Motion Control 2018 Group 8

From Control Systems Technology Group
Jump to navigation Jump to search

Group members

Name: E-mail Student id:
Srinivasan Arcot Mohanarangan (S.A.M) s.arcot.mohana.rangan@student.tue.nl 1279785
Sim Bouwmans (S.) s.bouwmans@student.tue.nl 0892672
Yonis le Grand y.s.l.grand@student.tue.nl 1221543
Johan Baeten j.baeten@student.tue.nl 0767539
Michaël Heijnemans m.c.j.heijnemans@student.tue.nl 0714775
René van de Molengraft & Herman Bruyninckx René + Herman Tutor

Initial Design

The initial design file can be downloaded by clicking on the following link:File:Initial Design Group8.pdf.

A brief description of our initial design is also given below in this section. PICO has to be designed to fullfill two different tasks, namely the Escape Room Competition (EC) and the Hospital Competition (HC). When either EC or HC is mentioned in the tekst below, it means that the corresponding design criteria is only needed for that competition. If EC or HC is not mentioned, the design criteria holds for both challenges.

Requirements

Escape Room Competition

For the Escape Room Competition, a simple algoritme was used as code. This was done so that the groupmembers without many C++ programming experience could get used to it while the more experienced programmers already worked on the perception code for the Hospital Competition.

Hospital Challenge

perception

monitoring

planning