Embedded Motion Control/Tutorials/Navigating the ROS filesystem

From Control Systems Technology Group
Jump to navigation Jump to search

Description: This tutorial introduces ROS filesystem concepts, and covers using the roscd, rosls, and rospack commandline tools.

Quick Overview of Filesystem Concepts

  • Packages: Packages are the lowest level of ROS software organization. They can contain anything: libraries, tools, executables, etc.
  • Manifest: A manifest is a description of a package. Its most important role is to define dependencies between packages.
  • Stacks: Stacks are collections of packages that form a higher-level library.
  • Stack Manifest: These are just like normal manifests, but for stacks.


When you look at the filesystem, it's easy to tell packages and stacks apart:

  • A package is a directory with a manifest.xml file.
  • A stack is a directory with a stack.xml file.

Filesystem Tools

Code is spread across many ROS packages and stacks. Navigating with command-line tools such as ls and cd can be very tedious which is why ROS provides tools to help you.

Using rospack and rosstack

rospack and rosstack allow you to get information about packages and stacks. In this tutorial, we are only going to cover the find option, which returns the path to package or stack.

Usage: 

rospack find [package_name]
rosstack find [stack_name]

For example, if you type the following in a terminal: 

rospack find roscpp

It returns: 

/opt/ros/groovy/share/roscpp

Using roscd

roscd is part of the rosbash suite. It allows you to change directory (cd) directly to a package or a stack.

Usage: 

roscd [locationname[/subdir]]

Run this example: 

roscd roscpp

To verify that we have changed to the roscpp package directory. Now let's print the working directory using the Unix command pwd: 

pwd

You should see: 

/opt/ros/groovy/share/roscpp

You can see that this is the same path that rospack find gave in the previous example.

Note that roscd, like other ROS tools, will only find ROS packages that are below the directories listed in your $ROS_PACKAGE_PATH. To see what is in your $ROS_PACKAGE_PATH, type: 

echo $ROS_PACKAGE_PATH

This should return 

/home/YOUR_NAME/ros/emc:/opt/ros/fuerte/share:/opt/ros/fuerte/stacks

This means that ROS will look for packages and stacks within all these colon-seperated directories. So, we should be able to navigate to any ROS package or stack that is located in ros/emc in your home folder. To check this, type: 

roscd pico_gazebo

If everything is set up correctly, you will have navigated to 

/home/YOUR_NAME/ros/emc/general/pico_gazebo

Subdirectories

roscd can also move to a subdirectory of a package or stack.

Try: 

roscd pico_example/src

$ pwd You should see: 

/home/YOUR_NAME/ros/emc/general/pico_example/src

which means you directly navigated to the src directory in the pico_example package.

Using rosls

rosls is part of the rosbash suite. It allows you to ls directly in a package, stack, or common location by name rather than by package path.

Usage:

$ rosls [locationname[/subdir]] Example:

$ rosls roscpp_tutorials Would return:

bin cmake manifest.xml srv

Tab Completion

It can get tedious to type out an entire package name. In the previous example, roscpp_tutorials is a fairly long name. Luckily, some ROS tools support TAB completion.

Start by typing:

$ roscd roscpp_tut<<< now push the TAB key >>> After pushing the TAB key, the command line should fill out the rest.

$ roscd roscpp_tutorials/ This works because roscpp_tutorials is currently the only ROS package that starts with roscpp_tut.

Now try typing:

$ roscd tur<<< now push the TAB key >>> After pushing the TAB key, the command line should fill out as much as possible:

$ roscd turtle However, in this case there are multiple packages that begin with turtle. Try typing TAB another time. This should display all the ROS packages that begin with turtle 

 turtle_actionlib/  turtlesim/         turtle_tf/

On the command line you should still have

$ roscd turtle Now type a s after turtle and then push TAB

$ roscd turtles<<< now push the TAB key >>> Since there is only one package that start with turtles, you should see:

$ roscd turtlesim/

Review

You may have noticed a pattern with the naming of the ROS tools:

  • rospack = ros + pack(age)
  • rosstack = ros + stack
  • roscd = ros + cd
  • rosls = ros + ls

This naming pattern holds for many of the ROS tools.


Now that you can get around in ROS, let's create a package.

Retrieved from "https://cstwiki.wtb.tue.nl/index.php?title=Embedded_Motion_Control/Tutorials/Navigating_the_ROS_filesystem&oldid=8305"