Autonomous Referee System: Difference between revisions

From Control Systems Technology Group
Jump to navigation Jump to search
No edit summary
No edit summary
Line 13: Line 13:


On this page details regarding the architecture, the hardware used and the software developed for implementation are made available.
On this page details regarding the architecture, the hardware used and the software developed for implementation are made available.
[[File:Drone Ref.png|thumb|center|750px|Illustration by Peter van Dooren, BSc student at Mechanical Engineering, TU Eindhoven, November 2016.]]




Line 29: Line 25:
* Joep Wolken
* Joep Wolken


<!--[[File:Drone Ref.png|thumb|center|750px|Illustration by Peter van Dooren, BSc student at Mechanical Engineering, TU Eindhoven, November 2016.]]-->


 
[[File:Drone Ref.png|thumb|center|750px|Illustration by Peter van Dooren, BSc student at Mechanical Engineering, TU Eindhoven, November 2016.]]
<!--  
<!--  



Revision as of 14:47, 29 March 2017

'An objective referee for robot soccer'


Building upon the Robotic Drone Referee project executed by the first generation of Mechatronics System Design trainees, the objective of this project is to extend the system architecture (which was previously developed) and prove the concept. This will be done by refereeing a robot-soccer match using a drone and a ground robot. These two agents working together, are expected to evaluate two rules:

  1. Ball going out of pitch, i.e. the outside rule
  2. collision between the players, i.e. a situation where a free-kick needs to be awarded against the defaulting team

On this page details regarding the architecture, the hardware used and the software developed for implementation are made available.


Team

This project was carried out for the second module of the 2016 MSD PDEng program. The team consisted of the following members:

  • Farzad Mobini
  • Tuncay Uğurlu Ölçer
  • Jordy Senden
  • Akarsh Sinha
  • Tim Verdonschot
  • Sa Wang
  • Joep Wolken


Illustration by Peter van Dooren, BSc student at Mechanical Engineering, TU Eindhoven, November 2016.